Mitel 5020 IP Manual de usuario

User Guide for the 5020/5220 IP and Superset™ 4025/4125

Telephones

ACD

SUPERVISOR / SENIOR SUPERVISOR

DUE TO THE DYNAMIC NATURE OF THE PRODUCT DESIGN, THE INFORMATION CONTAINED IN

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. MITEL CORPORATION, ITS

AFFILIATES, AND/OR ITS SUBSIDIARIES ASSUME NO RESPONSIBILITY FOR ERRORS AND

OMISSIONS CONTAINED IN THIS INFORMATION.

DbQTU]Qb[_V=9D5<3_b`_bQdY_^

Contents

Getting Started

Introduction..........................................................................................3

Using a Headset ..................................................................................4

Logging In / Out ...................................................................................7

Queue Status

Queue Status at a Glance..................................................................11

Displaying a Group’s Queue Status ...................................................11

Displaying Reports.............................................................................12

Scrolling Through Reports .................................................................13

About the SHIFT Key.........................................................................15

AGENT STATUS

About Agent Status Keys ...................................................................19

Agent Status at a Glance...................................................................19

Displaying an Agent’s Status..............................................................20

Displaying Agent Status Reports........................................................21

About the Shift Key............................................................................22

AGENT MONITORING

About Agent Monitoring......................................................................27

Agent Help.........................................................................................29

REPORTS AND INDICATORS

Queue Status Reports........................................................................33

Agent Status Reports.........................................................................34

Status Indicators................................................................................35

ADDITIONAL FEATURES

Some Additional Features..................................................................39

GETTING STARTED

Introduction

This guide provides instructions for using ACD supervisor and senior supervisor

features on Mitel Networks 5020 IP, 5220 IP, SUPERSET 4025, and SUPERSET

4125 telephone. Refer to your telephone User Guide for a description the

telephone and non-ACD features.

Some of the personal keys on your telephone are programmed as QUEUE

STATUS keys or AGENT STATUS keys, and one may be programmed as a

SHIFT key. You use these keys to monitor the status of agents and agent groups.

Supervisor or senior supervisor?

Supervisors monitor agent groups. Senior supervisors monitor supervisors and

possibly agent groups as well. An agent group can be monitored by either a

supervisor or a senior supervisor, but not both. As a supervisor or senior

supervisor, you can’t answer ACD calls from your telephone.

One or more agent groups?

You’ll have one QUEUE STATUS key programmed on your telephone for each

of your agent groups. If you only have one QUEUE STATUS key (i.e., one agent

group to supervise), you can also have AGENT STATUS keys programmed on

your telephone.

AGENT STATUS keys are not available on senior supervisor phones.

You have easy access to information

A QUEUE STATUS key allows you to access information for an agent group and

for the agents within that group. An AGENT STATUS key displays information for

individual agents within a group.

Once you’ve accessed information, you can display the same type of information

for other agent groups or agents by pressing other QUEUE STATUS keys or

AGENT STATUS keys.

You can exit an information display at anytime by pressing SUPERKEY.

Using a Headset

Note: Your system administrator may have enabled full-time headset operation

on your telephone. Phones with full-time headset operation enabled must be

operated only with headsets.

A headset can be used either in regular answer mode or with the Auto Answer

feature programmed.

Most headsets are installed using the same jack that the handset plugs into.

MITEL’s Headset with Feature Control Switch plugs into the dedicated headset

jack (the jack nearest the front of the telephone).

To Install a Headset (no feature control switch)

To install the headset for your use, perform the following tasks:

1. When the telephone is not in use, lift the handset from the cradle and

carefully turn the telephone upside down.

2. Unplug the handset cord where it connects to the telephone.

3. Plug in the headset cord in the same place.

4. Store your handset in a safe place.

To return to handset operation, perform the following tasks:

1. When the telephone is not in use, lift the handset from the cradle and

carefully turn the telephone upside down.

2. Unplug the headset cord where it connects to the telephone.

3. Plug in the handset cord in the same place.

4. Set the telephone upright and return the handset to the cradle.

5. Store your headset in a safe place.

To Install a Headset with Feature Control Switch

IMPORTANT NOTE: MITEL’s Headset with Feature Control Switch must be

installed in the dedicated headset jack (the jack nearest the front of the

telephone). Installation will disable your handset microphone.

Disconnecting the headset at the jack or at the quick-disconnect plug

restores handset operation.

To install the headset for your use, perform the following tasks:

1. When the telephone is not in use, lift the handset from the cradle and

carefully turn the telephone upside down.

2. Plug the headset cord into the headset jack (the jack nearest the front

of the telephone).

3. Set the telephone upright and return the handset to the cradle.

To return to handset operation, perform the following tasks:

1. When the telephone is not in use, lift the handset from the cradle and

carefully turn the telephone upside down.

2. Unplug the headset cord where it connects to the telephone.

3. Set the telephone upright and return the handset to the cradle.

4. Store your headset in a safe place.

Enabling/Disabling Headset Operation:

To enable or disable headset operation for headsets on phones that are not

programmed for full-time headset operation:

•Press the HEADSET feature key.

•Connect or disconnect the headset at the quick-disconnect plug

(Headset with Feature Control Switch only).

Handling Calls with a Headset (no Feature Control Switch):

To answer a call (when Auto Answer is disabled):

•Press the flashing Line Select key.

To hang up:

•Press CANCEL.

Handling Calls with a Headset with Feature Control Switch:

To answer a call (when Auto Answer is disabled):

•Quickly press and release the Control Switch.

To mute the headset microphone (Headset with Feature Control Switch only):

•Press and hold the Control Switch.

To hang up:

•Quickly press and release the Control Switch.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Teléfono de Mitel

Mitel

Mitel Superset 430 Manual de usuario

Mitel

Mitel OfficeSuite UC 6920 Manual de usuario

Mitel

Mitel 1023 Manual de usuario

Mitel

Mitel Deskphone 6873 Manual de usuario

Mitel

Mitel 3000 Manual de usuario

Mitel

Mitel 5614 Guía de referencia

Mitel

Mitel 6867i Premium Manual de usuario

Mitel

Mitel MiVOICE 6930 Manual de usuario

Mitel

Mitel Deskphone 6865 Manual de usuario

Mitel

Mitel 632 Manual de usuario

Mitel

Mitel MiVoice 6900 Series Manual de usuario

Mitel

Mitel SUPERSET 4001 Manual de usuario

Mitel

Mitel 8560 Manual de usuario

Mitel

Mitel Superset 4025 Manual de usuario

Mitel

Mitel MiVOICE 6930 Manual de usuario

Mitel

Mitel 200 Manual de usuario

Mitel

Mitel SX-50 Manual de usuario

Mitel

Mitel MiVoice 4220 Lite Manual

Mitel

Mitel MiVoice 4224 Manual

Mitel

Mitel 8568 Manual de usuario

Mitel

Mitel 6865 SIP Manual de usuario

Mitel

Mitel MiVoice 6920w Manual de usuario

Mitel

Mitel T7208 Manual de usuario

Mitel

Mitel SUPERSET 4001 Manual de usuario

Manuales populares de Teléfono de otras marcas

GE 2-9480 Manual de usuario

Geemarc

Geemarc PHOTOPHONE 155 Manual de usuario

D-Link

D-Link DWR-720/PW Manual de usuario

Interquartz

Interquartz Gemini IQ333 Manual de usuario

SSS Siedle

SSS Siedle HT 840-0 Manual de usuario

Motorola

Motorola TITANIUM Manual de usuario

Panasonic

Panasonic ICX Manual de usuario

LG H870DS Manual de usuario

Samsung

Samsung GT-I9500 Manual de usuario

AT&T

AT&T Trimline 205 Manual de usuario

Selta

Selta zenyth 600 Manual de usuario

Doro

Doro AFTI 20 Manual de usuario

UNIQCELL

UNIQCELL A1 Manual de usuario

Panasonic

Panasonic KX Series Manual de usuario

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manual de usuario

BT Decor 425 Manual de usuario

NEC

NEC SV8500 Manual de usuario

Teledex

Teledex PEARL Manual de usuario