Mitchell uStreamTT1 Manual de usuario
Belt-Drive Bluetooth Turntable
User Guide
Important Safety Instruction
1. Read these instructions – All the safety and operating instructions should be read before this
product is operated.
2. Keep these instructions – The safety and operating instructions should be retained for future
reference.
3. Heed all warnings – All warnings on the appliance and in the operating instructions should be
adhered to.
4. Follow all instructions – All operating and use instructions should be followed.
5. Do not use this apparatus near water – The appliance should not be used near water or
moisture – for example, in a wet basement or near a swimming pool, and the like.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacture’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at the plugs,
convenience receptacles, and at the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
12. Unplug the apparatus during lightning storms or when unused for long periods of
time.
13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
14.
- This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
a. Warning: To reduce the risk of electric shock, do not remove cover (or back) as there
are no user-serviceable parts inside. Refer servicing to qualified personnel.
b. The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance instructions in the literature
accompanying the appliance.
15. This equipment is a Class II or double insulated electrical appliance. It has been designed
in such a way that it does not require a safety connection to electrical earth.
16. The mains plug is used as disconnect device, the disconnect device shall remain readily
operable.
17. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture. The apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall not be placed on apparatus.
18. The use of the equipment in moderate climate.
19. WARNING: Please refer the information on exterior bottom enclosure for electrical and safety
information before installing or operating the apparatus.
20. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-
cloths, curtains etc.
21. No naked flame sources, such as lighted candles, should be placed on the apparatus.
22. Do not install this equipment in a confined space such as a book case or similar unit.
23. The symbol with Indication AC voltage.
24. Correct Disposal of this product. This marking indicates that this product should not be
disposed with other household wastes throughout the EU.
-To prevent possible harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of material resources.
-To return your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for environmental safe
recycling.
Precautions
Safety Information-caution:
1. In order to shut off power to this product completely, unplug the power cord from the wall outlet. Be sure
to unplug the unit if you do not intend to use it for an extended period of time, such as during a vacation.
2. Use of controls, adjustments and performance of procedures other than those specified herein may result in
hazardous radiation exposure.
3. To prevent electric shock, match wide blade of plug to wide slot, fully insert.
4. If this product is experience problems during operation, contact qualified service centers, and do not use the
product in defective states.
Safety Precautions
WARNING:
To reduce the risk of fire or electric shoc k, do no t expose this app liance to rain or moisture.
CAUTION:
Use of controls or adjustments or performance of procedures other than those specified may result
in hazardous radiation exposures.
CAUTION
RISK OF ELECTRIC SHOCKS - DO NOT OPEN!
To reduce the risk of electric shock, do not remove cover or back.
No user serviceable parts inside. Refer servicing to qualified service personnel.
The light flash with arrowhead symbol, within an equilateral triangle, is intended to alert
user to the presence of non-insulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert user to the
presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
(See markings on the back of the unit.)
Before Use
1. Choose unit installation location carefully. Avoid placing it in direct sunlight or close to a source of heat.
Also avoid locations subject to vibrations and excessive dust, cold or moisture. Keep away from sources
that hum, such as transformers or motors.
2. Do not open the cabinet as this may result in damage to the circuitry or electrical shock. If a foreign object
should get into the set, contact Customer Service.
3. Be sure not to handle record with dirty fingers. Never play a record that has a crack on the surface.
4. When removing the power plug from the wall outlet, always pull directly on the plug, never pull the cord.
5. To protect the stylus, don’t forget to put on the white protective needle cover after use.
6. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry
cloth.
7. In order to shut off the power to this product completely, unplug the power cord from the wall outlet. Be
sure to unplug the unit if you do not intend to use it for an extended period of time, such as a vacation.
8. Keep this manual in a safe place for future reference.
Product Overview
Top view
#
ITEM
DESCRIPTION
1
Turntable
Aluminum alloy turntable.
2
Spindle
Place a record onto the spindle to play.
3
Counterweight
Turn to adjust the needle pressure.
4
Anti-skate control
Turn to adjust the inward tracking forces that occur with
certain pick-up when the stylus nears the center of the
record.
5
Tone arm lifter
Push forward and pull back to raise and lower tone arm.
6
Tone arm rest holder
Place the tone arm on this holder when not in use.
7
Tone arm
Holds the stylus that produces sound from the record.
8
Bluetooth pairing
button
Press to open Bluetooth transmitting. The white Bluetooth
indicator slowly flash. Wait for 5 seconds, press again to
start Bluetooth pairing. Your turntable pairs to audio
devices (such as Bluetooth speakers, headphones, and
receivers). The white Bluetooth indicator quickly flash.
When the turntable paired with a Bluetooth speaker, the
white indicator lights solid.
9
RPM selector switch
Turn to select the record type (33 or 45) or OFF to turn off
your turntable.(The default OFF)
10
Status indicator
Bluetooth standby: white light slowly flash
Bluetooth pairing: red and white light quickly flash.
Bluetooth paired: white light solid.
Bluetooth pairing failed: red light solid.
11
Stylus
Generates sound from a playing record.
Rear view
#
ITEM
DESCRIPTION
1
Line out jack
Plug the included RCA cable into this jack. Make sure red to red
and white to white.
2
PRE-AMP ON/OFF
switch
Ensure pre-amp switch is switched to “ON” for “LINE IN”
connection. For “PHONO ON” connection pre-am switch would
be switched to “OFF”. Improper setting of PRE-AMP switch will
lead to no sound or explosive sound.
3
AC power jack
Plug the AC power cord into this jack and into a power outlet.
Setting up your turntable
You need to install the turntable before you can use it.
1. Take the accessories out of the packing case and check that the accessories are in complete
and good condition.
#
Accessory
Quantity
1
RCA cable
1 pcs
2
Power cable
1 pcs
3
Counterweight
1 pcs
4
45 RPM adapter
1 pcs
5
Turntable mat
1 pcs
6
Two belts
2 pcs (one installed and
one spare)
7
User guide
2. Install the metal platter (the belt is preinstalled on the bottom of the metal platter) and a
turntable mat on the metal platter.
3. Install dust cover.
4. Attach and adjust the counterweight.
5. Carefully remover the tape. Too much force will damage the cover and stylus.
Installing the platter and turntable mat
1. Make sure that the belt is not twisted, then use your thumb to stretch the belt until it reaches
the round hole in the platter.
2. Still holding the belt, flip the platter over, then insert the platter onto the spindle in the center
of your turntable.
Note: The belt is preinstalled on the bottom of the metal platter.
Note: Make sure that you place the belt on the metal track and not on be section with teeth.
3. Align the round hole in the platter with the pulley and use your finger to hook the belt onto
the pulley.
4. Place the turntable mat on the platter.
Install dust cover
1. Insert the dust cover hinges into the hinge bases on the back panel of the unit.
2. Hold the dust cover and insert it into the hinges.
Note: When you want to take out the platter from the turntable, remove the mat first, then
grasp the platter and pull it upward. This is especially important if you are shipping your
turntable to prevent the platter from shaking.
Note: To remove the dust cover, grasp the two sides of the dust cover and
slowly lift upward to remove the dust cover together with hinges.
Attaching and adjusting the counterweight
The counterweight on the tone arm adjusts the needle pressure. If the pressure is too much,
sound is distorted. If the pressure is too little, track skipping happens more frequently.
1. Hold the counterweight with the black number ring on the counterweight towards you, and
then slightly push the counterweight into the end of tone arm. When you hear the second
click from the pogo pin on the tone arm, the counterweight has been installed correctly.
2. Remove the stylus cover.
Tabla de contenidos
Otros manuales de Placa giratoria de Mitchell
