Miranda RCP-BR Manual de instrucciones
RCP-BR Panel
Guide to Installation and Operation
M885-9900-104
November 2011
Miranda Technologies Inc.
3499 Douglas-B.-Floreani
St-Laurent, Québec, Canada H4S 1Y6
Tel. 514-333-1772
Fax. 514-333-9828
www.miranda.com
© 2011 Miranda Technologies Inc.
Copyright © 2011 Miranda Technologies Ltd. All rights are reserved and, under
the copyright laws, this manual may not be reproduced in any form, in whole or in
part, without the prior written consent of Miranda Technologies Ltd.
Windows95, Windows98, Windows2000, WindowsNT and
WindowsXP are registered products of Microsoft Inc.
RCP-BR: Guide to Installation and Operation
Miranda Technologies Inc.
Compliance Information
Electromagnetic Compatibility
This equipment has been tested for verification of compliance with
FCC Part 15, Subpart B requirements for Class A digital devices.
NOTE: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
This equipment has been tested and found to comply with the
requirements of the EMC directive 2004/108/CE:
•EN 55022 Radiated emissions Class A
•EN 55022 Conducted emissions Class A
•EN 61000-3-2 Harmonic current injection
•EN 61000-3-3 Voltage changes, voltage fluctuations and flicker
•EN 61000-4-2 Electrostatic discharge immunity
•EN 61000-4-4 EFT/Burst immunity
•EN 61000-4-5 Surge immunity
•EN 61000-4-6 Conducted immunity
•EN 61000-4-11 Voltage dips, short interruptions and voltage
variations immunity
RCP-BR: Guide to Installation and Operation
Miranda Technologies Inc.
How to contact us:
For technical assistance, please contact the Miranda technical support centre
nearest you.
Visit our web site at www.miranda.com
Americas
Telephone:
+1-800-224-7882
e-mail:
Asia
Telephone:
+852-2539-6987
e-mail:
Europe, Middle East, Africa, UK
Telephone:
+44 (0) 118 952 3400
e-mail:
China
Telephone:
+86-10-5873-1814
e-mail:
France (only)
Telephone:
+33 (0) 1 55 86 87 88
e-mail:
RCP-BR: Guide to Installation and Operation
Miranda Technologies Inc.
Table of contents
1 RCP-BR Panel ........................................................................ 1
1.1
Introduction................................................................................. 1
1.2
Features ..................................................................................... 1
2 Setting up of the RCP-BR panel............................................ 2
2.1
Connecting up the panel ............................................................ 2
2.2
Network configuration................................................................. 3
2.3
Station configuration................................................................... 5
2.3.1
Setting up the station configuration............................... 7
3 Using the RCP-BR panel...................................................... 15
3.1
Turning on the unit ................................................................... 15
3.2
Turning off the unit (Shutting down) ......................................... 15
3.2.1
Shutting down from the System Panel screen ............ 16
3.2.2
Shutting down from small Control Window Dialog ...... 17
3.3
Starting up an already shut-down RCP-BR unit....................... 17
3.4
Panel basics ............................................................................. 18
3.4.1
Panel Lock button........................................................ 19
3.4.2
Channel Select ............................................................ 19
3.4.3
DSK Off ....................................................................... 19
3.4.4
Take............................................................................. 19
3.5
Selecting a channel .................................................................. 20
3.5.1
Channel ganging ......................................................... 20
3.5.2
User channels ............................................................. 22
3.6
The Main panel......................................................................... 24
3.6.1
Cutting a keyer up or down ......................................... 26
3.6.2
Setting fade rates ........................................................ 27
3.6.3
Cutting a voice-over up or down.................................. 28
3.6.4
Macros......................................................................... 29
3.6.5
Fade to black / silence................................................. 30
3.6.6
Arming multiple events on a Take............................... 30
3.7
Loading media into a keyer ...................................................... 31
RCP-BR: Guide to Installation and Operation
Miranda Technologies Inc.
3.7.1
Filter .............................................................................34
3.8
Modifying media in a keyer .......................................................36
3.8.1
Adjusting media position..............................................36
3.8.2
Adjusting the media cropping ......................................37
3.8.3
Adjusting the media clip, gain and transparency .........38
3.8
Audio.........................................................................................39
3.9
Voice-overs ...............................................................................41
3.9.1
Easyplay media browsing ............................................42
3.10
The System panel .....................................................................44
3.11
Alarms.......................................................................................46
4 The web interface .................................................................47
4.1
Maintenance .............................................................................49
4.1.1
Update .........................................................................50
4.1.2
Update history..............................................................51
4.1.3
Licenses.......................................................................52
4.1.4
Install panels ................................................................53
4.1.5
System restart..............................................................54
4.1.6
System shutdown.........................................................55
4.2
Diagnostics ...............................................................................56
4.2.1
Retrieve log files ..........................................................57
4.2.2
Watch log .....................................................................59
4.2.3
Running processes ......................................................60
4.3
Setup.........................................................................................61
4.3.1
Network setup ..............................................................62
4.3.2
Set hostname...............................................................63
4.3.3
Time setup ...................................................................64
4.3.4
Mouse setup ................................................................65
4.3.5
Serial number...............................................................66
4.3.6
Station..........................................................................66
5 Installation.............................................................................67
5.1
Mounting ...................................................................................67
5.1.1
Mounting with ears.......................................................67
RCP-BR: Guide to Installation and Operation
Miranda Technologies Inc.
5.1.2
Mounting with 30 degree brackets .............................. 69
5.1.3
With 60 degree Desk-Mounting kit, RCP-BR-DM-KIT. 70
5.1.4
With Rack-Mounting kit, RCP-BR-RM-KIT.................. 71
5.2
Ventilation................................................................................. 72
5.3
Power requirements ................................................................. 72
5.4
RCP-BR rear connections ........................................................ 73
5.4.1
Summary ..................................................................... 73
5.4.2
DC power connector pinout (8 pin DIN, female) ......... 74
5.4.3
GPIO pinout (15-way D-type) ...................................... 75
5.5
Mechanical ............................................................................... 76
5.6
Environment ............................................................................. 76
5.6.1
Operating..................................................................... 76
5.6.2
Storage ........................................................................ 76
5.7
Other......................................................................................... 77
5.7.1
RTC battery ................................................................. 77
5.7.2
Compact Flash ............................................................ 77
RCP-BR: Guide to Installation and Operation
Miranda Technologies Inc. Page 1
1 RCP-BR Panel
1.1 Introduction
The highly graphical, touch screen Branding Panel provides highly informative
and easy control of Miranda’s channel branding processors, including the
Intuition-XG, the Imagestore 750, and the Densite LGK-3901 / DSK-3901 and
Imagestore-Modular products.
1.2 Features
FLEXIBLE AND USER-FRIENDLY CONTROL PANEL
•Rich graphical interface
•Customizable layouts via standalone software running on a PC
•Combination of touch screen and button control
•Intuitive operation
•Full tallies from devices under control
COMPLETE CONTROL FOR BRANDING APPLICATIONS
•Full keyer and voice-over control
•Media browsing with graphical thumbnails
•Quick adjustment of parameters via rotaries
•Custom branding macro recall
•Easy configuration of keyers and voice-overs
OPTIMIZED FOR MULTI-CHANNEL ENVIRONNMENTS
•Channel ganging capable (simultaneous multi-channel control)
•Easy to use channel selector
ELEGANT DESIGN AND SIMPLE CONNECTIVITY
•1/2 rack / 3RU form factor
•Desk or turret mount
•Connects to branding devices via Ethernet (Oxtel protocol)
•Two USB ports for software upgrades or mouse/keyboard
RCP-BR: Guide to Installation and Operation
Page 2 Miranda Technologies Inc.
2 Setting up of the RCP-BR panel
Before using the RCP-BR panel to control a system, two things will need to be
setup, these are:
1. The networking configuration.
2. The station configuration which defines which devices the panel will
control and the configuration of these devices into channels
.
These will be explained in this section.
2.1 Connecting up the panel
Please refer to Figure 2-1 for a picture of the rear of the RCP-BR panel. For
normal usage an Ethernet cable must be inserted with a connection to the network
that the devices to be controlled are on. In addition there is an earth stud for
earthing the unit.
Earth stud DC Power GPI USB Ethernet
Figure 2-1 Main rear connections for the RCP-BR panel
To power up the unit connect the remote power adapter to the power socket on the
RCP-BR panel before the power adapter is connected to the mains supply.
Tabla de contenidos
Otros manuales de Panel de control de Miranda
Miranda
Miranda NV9640 Manual de usuario
Miranda
Miranda NV9605 Manual de usuario
Miranda
Miranda iMC-Panel-300 Manual
Miranda
Miranda iMC-Panel-GUI Manual
Miranda
Miranda iMC-Panel-200 Manual de usuario
Miranda
Miranda RCP-200 Manual de instrucciones
Miranda
Miranda NV9607 Manual de usuario
Miranda
Miranda NV9642 Manual de usuario
Miranda
Miranda NV9604 Manual de usuario
Miranda
Miranda NV9641 Manual de usuario
