Mirage IVEH121A Manual de usuario
OWNER’S MANUAL
Split Air Conditioner
IVEH121A / OVEH121A
IVEH181A / OVEH181A
IVEH241A / OVEH241A
CONFORMS TO
UL STD. 1995
CERTIFIED TO
CSA STD. C22.2
NO. 236
Thank you for choosing our product.
For proper operation, please read and keep this manual carefully.
If you have lost the Owner’s Manual, please visit: www.mirageappliances.us
2
Table of Contents
Owner’s/Installation manual
Precautions....................................................................................
Unit Specications and Features.................................................
Manual Operation (Without Remote)............................................
Care and Maintenance..................................................................
Troubleshooting............................................................................
Remote Controller Specications................................................
Operation of buttons........................................................................
Indicators on LCD............................................................................
How to use the buttons...................................................................
Auto operation.................................................................................
Dehumidifying operation..................................................................
Timer operation................................................................................
Handling the remote controller.........................................................
Installation......................................................................................
Safety Precautions..........................................................................
Accessories......................................................................................
Installation Summary - Indoor Unit..................................................
Unit Parts.........................................................................................
Indoor Unit Installation..................................................................
Installation Instructions
Step 1: Select installation location..........................................
Step 2: Attach mounting plate to wall.....................................
Step 3: Drill wall hole for connective piping...........................
Step 4: Prepare refrigerant piping..........................................
Step 5: Connect drain hose....................................................
Step 6: Connect signal and power cables..............................
Step 7: Wrap piping and cables.............................................
Step 8: Mount indoor unit.......................................................
4
6
11
12
14
18
19
22
23
23
24
25
28
31
32
24
36
38
39
39
40
40
42
43
45
46
46
3
Outdoor Unit Installation...............................................................
Installation Instructions -Outdoor Unit
Step 1: Select installation location..........................................
Step 2: Install drain joint.........................................................
Step 3: Anchor outdoor unit...50
Step 4: Connect signal and power cables...51
Refrigerant Piping Connection....................................................
Note on Pipe Length..............................................................
Connection Instructions - Refrigerant Piping..........................
Step 1: Cut pipes...........................................................
Step 2: Remove burrs...................................................
Step 3: Flare pipe ends.................................................
Step 4: Connect pipes...................................................
Air Evacuation................................................................................
Evacuation Instructions...........................................................
Note on Adding Refrigerant....................................................
Electrical and Gas Leak Checks...................................................
Test Run.........................................................................................
48
48
49
50
51
53
53
53
53
54
54
55
57
57
58
59
60
4
Precautions
Read Safety Precautions Before Installation
Incorrect installation due to ignoring instructions can cause serious damage or injury.
The seriousness of potential damage or injuries is classied as either a WARNING or CAUTION.
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
INSTALLATION WARNINGS
• Ask an authorized dealer to install this air conditioner. Inappropriate installation may cause water
leakage, electric shock, or re.
• All repairs, maintenance and relocation of this unit must be performed by an authorized service
technician. Inappropriate repairs can lead to serious injury or product failure.
WARNINGS FOR PRODUCT USE
• If an abnormal situation arises (like a burning smell), immediately turn o the unit and pull the
power plug. Call your dealer for instructions to avoid electric shock, re or injury.
• Do not insert ngers, rods or other objects into the air inlet or outlet. This may cause injury, since
the fan may be rotating at high speeds.
• Do not use ammable sprays such as hair spray, lacquer or paint near the unit. This may cause
re or combustion.
• Do not operate the air conditioner in places near or around combustible gases. Emitted gas may
collect around the unit and cause explosion.
• Do not operate the air conditioner in a wet room (e.g., bathroom or laundry room). This can cause
electrical shock and cause the product to deteriorate.
• Do not expose your body directly to cool air for a prolonged period of time.
This symbol indicates that ignoring instructions may cause
moderate injury to your person, or damage to your appliance or
other property.
This symbol indicates that ignoring instructions may cause death
or serious injury.
WARNING
CAUTION
WARNING
5
ELECTRICAL WARNINGS
• Only use the specied power cord. If the power cord is damaged, it must be replaced by the manu-
facturer or certied service agent.
• Keep power plug clean. Remove any dust or grime that accumulates on or around the plug. Dirty
plugs can cause re or electric shock.
• Do not pull power cord to unplug unit. Hold the plug rmly and pull it from the outlet. Pulling directly
on the cord can damage it, which can lead to re or electric shock.
• Do not use an extension cord, manually extend the power cord, or connect other appliances to the
same outlet as the air conditioner. Poor electrical connections, poor insulation, and insucient voltage
can cause re.
CLEANING AND MAINTENANCE WARNINGS
• Turn o the device and pull the plug before cleaning. Failure to do so can cause electrical shock.
• Do not clean the air conditioner with excessive amounts of water.
• Do not clean the air conditioner with combustible cleaning agents. Combustible cleaning agents can
cause re or deformation.
• If the air conditioner is used together with burners or other heating devices, thoroughly ventilate the
room to avoid oxygen deciency.
• Turn o the air conditioner and unplug the unit if you are not going to use it for a long time.
• Turn o and unplug the unit during storms.
• Make sure that water condensation can drain unhindered from the unit.
• Do not operate the air conditioner with wet hands. This may cause electric shock.
• Do not use device for any other purpose than its intended use.
• Do not climb onto or place objects on top of the outdoor unit.
• Do not allow the air conditioner to operate for long periods of time with doors or windows open, or if
the humidity is very high.
CAUTION
6
Unit Specications and Features
Unit Parts
7
Achieving Optimal Performance
Inverter Split Type
Fixed-speed Type
To further optimize the performance of your unit, do the following:
• Keep doors and windows closed.
• Limit energy usage by using TIMER ON and TIMER OFF functions.
• Do not block air inlets or outlets.
• Regularly inspect and clean air lters.
FOR OUTDOOR UNITS
WITH AUXILIARY
ELECTRIC HEATER
When outside temperature
is below 32°F, we strongly
recommend
keeping the unit plugged in
at all time to ensure smooth
ongoing performance.
Optimal performance for the COOL, HEAT, and DRY modes can be achieved in the following
temperature ranges. When your air conditioner is used outside of these ranges, certain safety
protection features will activate and cause the unit to perform less than optimally.
8
Illustrations in this manual are for explanatory purposes. The actual shape of your indoor unit
may be slightly dierent. The actual shape shall prevail.
• Auto-Restart
If the unit loses power, it will automatically
restart with the prior settings once power has
been restored.
• Anti-mildew (some units)
When turning o the unit from COOL, AUTO
(COOL), or DRY modes, the air conditioner will
continue operate at very low power to dry up
condensed water and prevent mildew growth.
• Louver Angle Memory(some units) When
turning on your unit, the louver will automatically
resume its former angle.
• Refrigerant Leakage Detection (some units)
The indoor unit will automatically display “EC”
when it detects refrigerant leakage.
For a detailed explanation of your unit’s
advanced functionality (such as TURBO mode
and its self-cleaning functions), refer to the
Remote Control Section.
Other Features
NOTE ON ILLUSTRATIONS
9
Setting Angle of Air Flow
While the unit is on, use the SWING/DIRECT
button to set the direction (vertical angle) of
airow.
1. Press the SWING/DIRECT button once to
activate the louver. Each time you press the
button, it will adjust the louver by 6°. Press the
button until the direction you prefer is reached.
2. To make the louver swing up and down
continuously, press and hold the SWING/DIRECT
button for 3 seconds. Press it again to stop the
automatic function.
Setting horizontal angle of air ow
The horizontal angle of the airow must be set
manually. Grip the deector rod (See Fig.B)
and manually adjust it to your preferred direction.
For some units, the horizontal angle of the airow
can be set by remote control. please refer to the
Remote Control Section. Do not put your ngers in or near the
blower and suction side of the unit. The
high-speed fan inside the unit may cause
injury.
Fig. A
CAUTION
Setting Angle of Air Flow
NOTE ON LOUVER ANGLES
When using COOL or DRY mode, do not set
louver at too vertical an angle for long pe-
riods of time. This can cause water to con-
dense on the louver blade, which will drop
on your oor or furnishings. (See Fig.A)
When using COOL or HEAT mode, setting
the louver at too vertical an angle can re-
duce the performance of the unit due to
restricted air ow.
Do not move louver by hand. This will cause
the louver to become out of sync. If this oc-
curs, turn o the unit and unplug it for a few
seconds, then restart the unit. This will reset
the louver.
Fig. B
10
Sleep Operation
The SLEEP function is used to decrease energy
use while you sleep (and don’t need the same
temperature settings to stay comfortable). This
function can only be activated via remote control.
Press the SLEEP button when you are ready to
go to sleep. When in COOL mode, the unit will
increase the temperature by 2°F after 1 hour, and
will increase an additional 2°F after another hour.
When in HEAT mode, the unit will decrease the
temperature by 2°F after 1 hour, and will de-
crease an additional 2°F after another hour.
It will hold the new temperature for 5 hours, then
the unit will turn o automatically.
Note:The SLEEP function is not available
in FAN or DRY mode.
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Acondicionador de aire de Mirage
Mirage
Mirage IAEH121A Manual de usuario
Mirage
Mirage IAPH301A Manual de usuario
Mirage
Mirage VENTUS ALPHA IVADH361A Guía de solución de problemas
Mirage
Mirage IVXH090A Manual de usuario
Mirage
Mirage IVIH121A Manual de usuario
Mirage
Mirage IAXH090A Manual de usuario
Mirage
Mirage Magnum 13 E13C090W Manual de servicio
Mirage
Mirage Magnum Inverter 15 EMC120T Manual de usuario
