Miracall Technology IP PBX MC-IP8008 Manual de usuario
Miracall Technolo
g
ies
IP PBX MC-IP8008
User Manual
Please read this manual carefully before operation
1
TABLE OF CONTENTS
Chapter1 Brief Introduction & Features........................................................................2
1.1. System Features.................................................................................................2
1.2. Specifications......................................................................................................3
1.3. Default configuration...........................................................................................4
Chapter2 Basic Configuration........................................................................................ 5
2.1. Log on to the system...........................................................................................5
2.2. Configure User Extensions ................................................................................. 6
2.3. Trunk...................................................................................................................7
2.4. Outbound Routes............................................................................................... 10
2.5. Inbound Routes ...................................................................................................11
2.6. IVR (Interactive Voice Response)..................................................................... 12
2.7. Record ..............................................................................................................13
2.8. Voicemail...........................................................................................................14
2.9. Conferencing..................................................................................................... 15
2.10. Music On Hold ..................................................................................................16
2.11. Call Parking.......................................................................................................16
2.12. Ring Groups......................................................................................................17
2.13. Time Based Rules.............................................................................................18
Chapter3 Status Display............................................................................................... 18
3.1. Call Logs...........................................................................................................19
3.2. Register Status.................................................................................................. 19
3.3. System Info....................................................................................................... 20
Chapter4 System Management.................................................................................... 20
4.1. Network and Country ........................................................................................ 20
4.2. DDNS Setting............................................................................…………..........21
4.2. Change Password.............................................................................................21
4.3. Backup..............................................................................................................22
4.4. Upgrade............................................................................................................ 22
Chapter5 Operating Instruction................................................................................... 23
5.1. How to make a internal call...............................................................................23
5.2. How to make a outbound call............................................................................24
Make call via PSTN trunk................................................................................24
Make call via VoIP trunk..................................................................................26
5.3. How to make a incoming call ............................................................................27
2
Chapter 1 Brief introduction & Function
MiraCALL04/08 is an embedded ippbx based on standard asterisk for SMEs, which
is not only a PBX, but also as a voice mail Server, IVR server, conferencing server. With 4
or 8 analog interface which can be configured as FXS or FXO ports (made in factory),
and 1Wan and 1Lan with router function. With excellent echo canceller function, it can
meet most of the customers requirement.
1.1 System Features
*
Based on Asterisk
*
Configuration by Web
*
Built-in SIP/IAX Server
*
Static/DHCP/PPPoE network access
*
Codec: G.711-Ulaw, G.711-Alaw, G.726, G.729, GSM, SPEEX
*
SIP/IAX Trunk(use with VoIP Trunk operator)
*
Zap Trunk(Use with PSTN)
*
SIP/IAX Extensions(connect with IP Phone)
*
Zap Extensions(connect with Analog Phone)
*
Voice Mail ,and voicemail to email
*
Flexible Dial Plan
*
Call Conference
*
Auto-attendant
*
Music On Hold
*
Call Queue
*
Call history list
*
Support IP Phone with Key function
*
FAX T.38
*
Voicemail to email
*
Other basic function:
1.Three way conference
2.Call Forward(and forward to external PSTN or mobile)
3.Call Hold
4.Call Transfer
5.Call Waiting
6.Caller ID
1.2 Specifications
1) Interface
*
4or 8 * Analog Ports (RJ11)
*
1 * USB Interface(for Wifi moudule, unavailable)
*
1 * SD MMC Interface (2GB,to install voicemail)
*
2 * Network Interface (RJ45,1 for WAN, 1 for LAN)
*
1 * Power port（DC 12V 2A）
*
1 * Re-set Button (beside PWR button,black)
2) Panel
Mark Function Status Description
On Power On
PWR Power Status Off Power Off
On System working
SYS System Status Off System disabled
Wink Data exchanging
WAN WAN interface Status Off No Data exchanging
Wink Data exchanging
LAN LAN Interface Status Off No Data exchanging
On MMC enabled
MMC SD card Status Off MMC disabled
On WiFi enabled
USB USB WiFi module Off WiFi disabled
Red FXO port
Green FXS port
1-8lamp
Analog Modules Status Off FXO or FXS no connection
3
4
3) Hardware
*
32bit embedded RISC DSP
*
256M Onboard Nand Flash
*
2M Onboard Nor Flash
*
64M Onboard SDRAM
*
2G MMC/SD Storage
4) environmental requirements:
*
temperature: -10 °C -48 °C
*
Storage temperature: -30 °C -68 °C
*
humidity: 10-80% no dew
*
Power: 90~260VAC
5) Packing List
*
MC-IP4008,8008 1 Unit
*
Power Adapter 1 Unit
*
CD 1 pc
6) Packing Size:
*
Inner box MEAS: 280*198*70mm
*
G.W/unit: 1.3kg
*
Carton MEAS: 520*580*220mm
*
G.W: 15kg
*
PCS/CTN: 10PCS
1.3 Default configuration
1. Wan port IP address: 192.168.1.100:9999
2. Lan port IP address: 192.168.10.100:9999
3. Web GUI username: admin
4. Web GUI password: admin
5. Command line username: root
6. Command line password: myippbx
Chapter2 Basic Configuration
2.1.Log into the system
After connecting the ippbx to the local area network. Launch the web browser on a
computer that is in this local area network. Enter the IP address for the system (Wan port
IP address 192.168.1.100:9999, Lan port IP address 192.168.10.100:9999) . The start
web page will appear like this:
Enter Username and password (default username is admin, password is admin), then
click login. Once the login is success the home page will be display:
With the MiraCALL GUI, you can configure extensions, conference, voicemail, Dial
Plan
5
The home page is used for login out, Reboot or return to Factory default status.The home page is used for login out, Reboot or return to Factory default status.
*
Logout: To log out the MiraCALL GUI.
*
Logout: To log out the MiraCALL GUI.
*
Restart Asterisk Restarted the Asterisk system.
*
Restart Asterisk Restarted the Asterisk system.
*
Reboot: Reboot the IP-PBX system
*
Reboot: Reboot the IP-PBX system
*
Factory Defaults: Restore all settings to de factory default.
*
Factory Defaults: Restore all settings to de factory default.
*
Activate change: Made the change active for the current configuration after you
make a configuration change on some page.Everytime you should activate after
change the command or setting.
*
Activate change: Made the change active for the current configuration after you
make a configuration change on some page.Everytime you should activate after
change the command or setting.
2.2. Configure User Extensions2.2. Configure User Extensions
Click the Users tab and you will see the extensions setting, your created user in this
page.
Click the Users tab and you will see the extensions setting, your created user in this
page.
The following information comprises a user extension definition:
*
Extension The extension number given to station user.
*
Name The name for this extension, can be only.
*
Password Password to register the extension, same as IP phone
*
VM Password Password used to access specified voicemail extension.
*
E-mail Address Voice mails received by this extension can be sent as audio
file attachments emailed to a specific address (optional)
*
Caller ID The Caller ID number displayed for intercom call
*
Analog Phone To assign the analog phone to connect with which FXS port
*
Dial Plan Thedialrestriction,conditions setformakingcalls
6
There are also several advanced extension options available. The advanced options
establish the connections from the listed extension to other systems within the IPPBX
system server. These advanced options include the following:
*
Voicemail The extension support voicemail or not.
*
Can reinvite Can send call again In SIP protocol
*
SIP The extension support SIP protocol
*
IAX The extension support IAX protocol
*
NAT Address reflection between the WAN and public network. When
extension is within internal network, it should use NAT
*
Call Waiting The extension support Call Waiting function
*
3-Way Calling The extension support 3-Way Calling functions
*
Codecs Click here, you can set the extension’s codec (voice decode)
(default support: alaw, ulaw,g792).
2.3.Trunks
If you want to make external call, you must register with a Trunk in order to connect to
the Public Switched Telephone Network (PSTN) or other VoIP service provider. Through
the web page you can add a trunk.
When you click Add a Trunk , There are two Trunk categories: Analog
Trunk, Custom Trunk.
*
Analog Trunk You can enable analog PSTN trunk by this option (FXO port).
You need to delete the default Ports 1~6, and Add a PSTN Trunk based on how many
FXO port you have actually.
The above map shows the IP PBX has only 2ports Analog trunk. After choose Port 1 and 2,
you need to click “Save” , then to enable the setting.
*
Custom VoIP Trunk The Custom VoIP option allows you to create a custom VoIP
definition. To create the custom VoIP provider definition you will
7
need to complete the following:
*
Comment The name of the SIP Trunk
*
Protocol You can select a SIP or IAX protocol
*
Register Enable/Disable register.
*
Host The IP address provided by your IP carrier provider
*
Username The user name provided by your IP carrier provider
*
Password The password provided by your IP carrier provider
Once you have added a VoIP Trunk it will appear on the list of Trunk on the Trunk
page. There is an Options drop-down list associated with each Trunk listing. The Options
drop-down list allows you to edit or delete the Trunk definition, as well as further refine the
definition by choosing several advance options. Select either Codecs or Advanced to
further refine the definition.
8
*
Codecs Codecs provide the ability for your voice to be converted to a digital
signal and transmitted across the internet.
*
Advanced The following advanced options are available to further refine your
trunk.
*
Trunkname Specify a trunk name if you want to refer to the service provider
definition as something other than specified in Comment
*
Insecure This option specifies how connections to a service provider (host)
should be handled. Valid options are very/yes/no/invite/port. (Default is
very)
*
Port The register request is sent through the port. (Default is
SIP:5060,IAX:4569)
*
Caller ID The caller ID will be set to the value specified in this field
*
From domain Sets default from: domain in SIP messages when acting as a SIP client.
*
From user Sets default from: user in SIP messages when acting as a SIP client
*
Contact Specifies a primary extension for call routing
9
Tabla de contenidos
Manuales populares de Centralita privada de otras marcas
Allo.com
Allo.com Nano 2 Manual de usuario
ZYCOD
ZYCOD ZX50 Manual de usuario
Panasonic
Panasonic KX-TDA100BX Manual de usuario
LV switch
LV switch IPPBX800 Manual de instrucciones
Edge-Core
Edge-Core VST3305 Manual de usuario
Panasonic
Panasonic KX-T7625 - Digital Proprietary Speakerphone 24... Manual de usuario
Rauland-Borg
Rauland-Borg Telecenter IV Manual de usuario
Grandstream Networks
Grandstream Networks UCM6208 Manual de usuario
ATCOM
ATCOM IPPBX IP02 Manual de usuario
Panasonic
Panasonic KX-TVS50 - 2 Port Voicemail System Manual de usuario
bintec elmeg
bintec elmeg elmeg hybird 600 Manual de usuario
Panasonic
Panasonic KX-NS300 Manual de usuario
