MIRABELLA Genio I004608 Manual de usuario

I004608 Mirabella Genio Wi-Fi Pixel Floor Lamp

TO ENSURE THE SAFE AND SATISFACTORY OPERATION OF THIS SET PLEASE READ THESE INSTRUCTIONS CAREFULLY

AND RETAIN FOR FUTURE REFERENCE

SAFETY INFORMATION:

• Remove set from packaging before connecting to a power supply.

• only use the adaptor that is supplied.

•Ensure that the cable is completely uncoiled whilst set is in use.

•LED bulbs are non-replaceable.

PRODUCT INSTALLATION

When connecting the Floor lamp to the Wi-Fi controller, make sure the arrows are aligned with each other.

Wi-Fi pairing information (BK, EZ and AP method)

1. Download “Mirabella Genio” App from the APP store or Google Play and register an account.

2. Connect your mobile phone to 2.4GHz Wi-Fi network. (Please note, that this unit does not support 5GHz Wi-Fi)

3. Connect the Wi-Fi controller to the light, and the adaptor to the Wi-Fi controller

4. Wait for the light to commence to blink.

If the Floor light does not start to blink when first powered on, Press and hold the ON/OFF button on the Wi-Fi

controller, until it starts to blink.

If you having difficulty connect this lamp to the

Genio APP, wait for 3 minutes and lamp stopped

working, you can control this lamp manually using

the 3 button Wi-Fi controller.

Bluetooth BK method

Our latest genio smart Wi-Fi lighting range has a Bluetooth pairing assist function, to take advantage of this function, please

ensure that he Bluetooth on your phone is turned on.

Make sure the light is blinking fast (2 blinks per second), Open Mirabella Genio app, tap on the plus symbol ,

The APP will now automatically find the lights, once the app identifies the lights, follow the instructions below finalise the

pairing of the lights to the App.

Fasting blinking EZ method (when the Bluetooth on the phone is turned off)

1. Open the Mirabella Genio app, tap on the plus symbol.

2. Select Genio Tube light under the smart lighting, then follow the in-app prompts to connect tube light to your app

Slow blinking AP method (1 blinking per 2 second)

If the fasting blinking method didn’t work for you, please try the slow blinking AP method.

While the light is fast blinking, press and hold the ON/OFF again and wait for the light to start blinking slowly (1 blink per

second).

1. Open the APP this time on the reset the device first screen.

2. Tap on EZ mode located in the top right hand corner of the screen, select AP Mode.

3. Now Confirm indicator slowly blinking , tap Next, then Go to connect. The app should automatically take you to

your Wi-Fi screen, if it does not get out of the Genio app and go into your phone Wi-Fi screen page.

4. Search for a Wi-Fi signal commencing with SmartLife_XXX, once found select it to complete the pairing process.

If you cannot see the SmartLife-xxxx on the list, it

means the light was not blinking slowly, please reset

it and try again.

After you have connected to SmartLife_XXXX, return back to the Mirabella Genio app and it will commence

the 0-100% countdown and connection process, once complete, your lights are now paired to the app.

Please pay attention to this screen

to determent the cause of time-out

error

If the light never stops blinking,

there could be issue with the Wi-Fi

controller, please check our online

FAQ page before returning it

if light stopped blinking, but unable

progress to “register on cloud” it

indicates communication error with

your router to our cloud service

please check our online FAQ page

and ensure.

1. You enter the correct 2.4GHz Wi-

Fi name and password

2.Wi-Fi controller is in a location

with good Wi-Fi coverage, try move

it closer to the router

3. 5Ghz Wi-Fi signal is turned off on

the router (can be turn on after the

device is connected)

4. if you are using IOS 14, please

ensure “local network” permission

is turned on for Genio APP

FAQ:

Q. I have internet/power outage and device went offline and does not reconnect back online by

itself?

A. Go the device’ settings page (pencil or ... icon), look for “remove device” Remove it and reset the device

and pair it again through the app.

If you still having issue with pairing after use AP method, please check our online FAQ pages on

www.mirabellagenio.com.au/faqs

Mirabella International Pty Ltd

1 Mirabella Drive Tullamarine VIC. 3043 Australia

t: 1800 636 528

e: genio@mirabella.com.au

Otros manuales de Iluminación del hogar de MIRABELLA

MIRABELLA

MIRABELLA Genio I003937 Manual de usuario

MIRABELLA

MIRABELLA Genio I004732 Manual de usuario

MIRABELLA

MIRABELLA Genio I003259 Manual de usuario

MIRABELLA

MIRABELLA Genio I003935 Manual de usuario

MIRABELLA

MIRABELLA Genio I004733 Manual de usuario

MIRABELLA

MIRABELLA I003868 Manual de usuario

MIRABELLA

MIRABELLA Genio I004560 Manual de usuario

MIRABELLA

MIRABELLA Genio JETSON Manual de usuario

Manuales populares de Iluminación del hogar de otras marcas

JONATHAN Y

JONATHAN Y JYL5019A Manual de usuario

JONATHAN Y

JONATHAN Y JYL6007A Manual de usuario

Philips

Philips Ledino 31606/11/16 Manual de usuario

Salus

Salus UG600 Manual de usuario

Safavieh Lighting

Safavieh Lighting CANDRI TBL4427A Manual de usuario

Hunter

Hunter Bullet Spotlight Kit Manual de instrucciones

Philips

Philips Ledino 16811/87/16 Manual de usuario

Philips

Philips 405441213 Manual de usuario

Philips

Philips Halogen Light Manual de usuario

Pentair

Pentair GLOBRITE Manual de usuario

Philips

Philips 55592-30-16 Manual de usuario

Livoo

Livoo Night light Manual de usuario

Schwaiger

Schwaiger NFL45 Manual de usuario

FRITZ HANSEN

FRITZ HANSEN AQ01 PLUG-IN Manual de usuario

MOOD

MOOD CORSIN JY-16 Manual de usuario

Safavieh Lighting

Safavieh Lighting KREMP TBL4409A Manual de usuario

JONATHAN Y

JONATHAN Y JYL8019 Manual de usuario

XTRASUN

XTRASUN XTDEOKT1 Manual de usuario