Minolta CF1501 Manual de usuario
CF1501/CF2001
7664-4004-21
Operator’s Manual
Copyright
2001 MINOLTA CO., LTD.
MINOLTA CO., LTD.
3-13, 2-Chome, Azuchi-Machi, Chuo-ku, Osaka 541-8556, Japan
2001. 4
The information contained in this manual is
subject to change without notice to
incorporate improvements made on the
product or products the manual covers.
Additional Auxiliary Features
New Features 1
1
1 New Features
Additional functionsavailablewiththiscopierareshownbelow.Fordetails
on their operation, refer to the pages indicated.
GX/Y Zoom (Refer to page 2 for more
details.)
GPostcard (Refer to page 3 for more
details.)
GImage Repeat (Refer to page 5 for
more details.)
Note
The “X/Y Zoom”, “Postcard” and “Image Repeat” functions are only
available if the memory is installed.
1New Features
2
1.1 SpecifyingDifferentVerticalandHorizontalScaling
Proportions (“X/Y Zoom” Function)
Copies can be made by specifying different scaling proportions for the
vertical and the horizontal directions of the document. The zoom ratio can
be between ×0.500 and ×4.000 (in 0.001 increments).
To specify the vertical and horizontal scaling proportions
1Position the document(s) to be copied. (Refer to chapter 6 of the
Operator’s Manual.)
2Select the desired color mode. (Refer to chapter 3 of the Operator’s
Manual.)
3Touch [Auxiliary].
The Auxiliary screen appears.
4Touch [X/Y Zoom].
5Touch [X] or [Y], and use the
keypad to enter the desired zoom
ratio, and then touch [Enter].
6Specify any other necessary settings.
7Using the keypad, enter the number of copies you wish to make, and
then press the [Start] key.
New Features 1
3
1.2 Reducing the Document to Postcard Size and
Printing Multiple Copies on One Page (“Postcard”
Function)
The document can be reduced to the size of a postcard, and up to four
copies can be printed on one sheet of Letter-size postcard paper.
Document sizes that can be selected
GPreset sizes
5 1/2 × 8 1/2L in., 3 × 5L in., 4 × 6L in., 2 1/4 × 3 1/4L in., A5L, A6L,
B5L, B6L
GCustom sizes
X: 2 to 9 7/8 in.
Y: 2 to 8 1/4 in.
To set the “Postcard” function
1Position the document(s) to be copied. (Refer to chapter 6 of the
Operator’s Manual.)
2Select the desired color mode. (Refer to chapter 3 of the Operator’s
Manual.)
3Touch [Auxiliary].
The Auxiliary screen appears.
4Touch [Postcard].
5Touch [Original Size].
1New Features
4
6Select the document size,and then
touch [Enter].
HFor metric document sizes,
touch [Metric] to display a
screen containing metric paper
size settings.
HFor a paper size other than the
standard sizes listed on the
screen, touch [Custom Size].
Touch , , , and
to specify the the size of
the original, and then touch
[Enter].
7Load Letter-size postcard paper
lengthwise into the multipurpose
paper drawer (1st drawer) with the
front side of the paper facing up.
HSetthemediatypeselectiondial
to “Thick1”.
HAfter specifying the settings,
touch [Enter].
HIf the document is positioned as
shown on the screen, it will be
copied onto the paper as shown on the screen.
8Using the keypad, enter the number of copies you wish to make, and
then press the [Start] key.
Note
To purchase postcard paper, contact the sales representative for this
copier.
New Features 1
5
1.3 Tiling Copies (“Image Repeat” Function)
Multiple copies of the original can be printed at the desired zoom ratio to
fill the page. The zoom ratio can be set between ×0.500 and ×4.000 (in
0.001 increments). In addition, the number of times the original is to be
printed can be set between 1 and 100.
To set the “Image Repeat” function
1Position the document(s) to be copied. (Refer to chapter 6 of the
Operator’s Manual.)
2Select the desired color mode. (Refer to chapter 3 of the Operator’s
Manual.)
3Touch [Auxiliary].
The Auxiliary screen appears.
4Touch [Image Repeat].
5Make sure that [Zoom] is selected,
and then use the keypad to enter
the desired zoom ratio.
1New Features
6
6Touch [# of Images], and then use
the keypad to enter the desired
number of times that you wish to
print the original.
7Touch [Original Size], select the
document size, and then touch
[Enter].
HFor metric document sizes,
touch [Metric] to display a
screen containing metric paper
size settings.
HFor a paper size other than the
standard sizes listed on the
screen, touch [Custom Size].
Touch , , , and
to specify the the size of
the original, and then touch
[Enter].
8The appropriate size of loaded
paper for the set zoom ratio,
number of copies, and document
size is selected. Check the selected
paper size, and then touch [Enter].
New Features 1
7
HTo manually select the paper
source, touch [Paper Size].
Select the tray or drawer
containing the paper that you
wish to use, and then touch
[Enter].
9Press the [Start] key.
2Color shift Correction
8
2 Color shift Correction
If a difference can be seen between the original document and the copy,
fine adjustments in the color shift can be made.
To set the “Color Shift Correction” parameters
1In the Expert User’s Mode screen,
touch [Color Shift Correction (Bk)] for
the color that you wish to adjust.
The corresponding Color Shift
Correction screen appears.
(Refer to chapter 9 of the Operator’s
Manual.)
2Load paper (11 × 17L) into any paper
drawer,andthen press the[Start]key
to print out the test pattern.
3Fold the printed test pattern perpendicularly to the paper feed
direction, check that there is no shift in the up-and-down direction of
the black reference line, and then touch [Enter].
If there isa shift,touch and to specifythe desired adjustment
for “θ”, and then repeat steps 2 and 3 until there no longer is a shift.
Color shift Correction 2
9
When the necessary adjustments are finished, touch [Enter].
4Using the black grids as references, check for shifts in cyan,magenta
and yellow.
5In the Expert User’s Mode screen,
touch [Color Shift Correction] for the
color that you wish to adjust.
Touch[X],[Y]or[θ]fortheadjustment
thatyouwishtomake,andthentouch
and to specify the desired
adjustment value.
Continue printing thetest pattern and
making adjustments until there no
longer is a color shift. When the
necessary adjustments are finished, touch [Enter].
The example below shows the adjustment for cyan; however, the
other colors should be adjusted in the same way.
HIf the lines are shifted in the X-
direction:
Touch [X], and then align on the
black grid.
Otros manuales para CF1501
3
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Copiador de Minolta
Minolta
Minolta Di551 Manual de usuario
Minolta
Minolta EP2010 Manual de usuario
Minolta
Minolta EP1030 Manual de usuario
Minolta
Minolta EP4000 Manual de usuario
Minolta
Minolta SU2 Manual de usuario
Minolta
Minolta EP1054 Manual de usuario
Minolta
Minolta EP3010 Manual de usuario
Minolta
Minolta Di150f Manual de usuario
Minolta
Minolta EP1080 Manual de usuario
Minolta
Minolta Di 183f Manual de usuario
Minolta
Minolta CF910 Manual de usuario
Minolta
Minolta EP3000 Manual de usuario
Minolta
Minolta EP6000 Manual de usuario
Minolta
Minolta CF2001P Manual de usuario
Minolta
Minolta d-Color MF 20 Manual de usuario
Minolta
Minolta Di250 Manual de usuario
Minolta
Minolta Di181 Manual de usuario
Minolta
Minolta EP5000 Instrucciones de instalación
Minolta
Minolta CF1501 Manual de usuario
Minolta
Minolta Di620 Instrucciones de funcionamiento
