MINN KOTA RIPTIDE POWERDRIVE Manual de usuario

RIPTIDE POWERDRIVE

BOW-MOUNT TROLLING MOTOR

Installation Instructions

INTRODUCTION

NOTICE: The serial number on your Riptide PowerDrive is

located inside the mount below the motor rests.

THANK YOU

Thank you for choosing Minn Kota. We believe that you should spend more time ﬁshing and less time positioning your boat. That’s why

we build the smartest, toughest, most intuitive trolling motors on the water. Every aspect of a Minn Kota trolling motor is thought out and

rethought until it’s good enough to bear our name. Countless hours of research and testing provide you the Minn Kota advantage that

can truly take you “Anywhere. Anytime.” We don’t believe in shortcuts. We are Minn Kota. And we are never done helping you catch more ﬁsh.

REGISTRATION

Remember to keep your receipt and immediately register your

trolling motor on our website at minnkotamotors.com/register.

SERIAL NUMBER

Your Minn Kota 11 character serial number is very important. It

helps to determine the speciﬁc model and year of manufacture.

When Contacting consumer service or registering your product

you will need to know your products serial number. A duplicate

copy of your serial number label has been included which can

also be entered in the One-Boat Network App for future reference.

NOTICE: Do not return your Minn Kota motor to your retailer. Your retailer is not authorized to repair or replace this unit. You may

obtain service by: calling Minn Kota at (800) 227-6433; returning your motor to the Minn Kota Factory Service Center; sending

or taking your motor to any Minn Kota authorized service center. A list of authorized service centers is available on our website,

at minnkotamotors.com. Please include proof of purchase, serial number and purchase date for warranty service with any of the

above options.

Use of the Made for Apple badge means that an accessory has been designed to connect speciﬁcally to the Apple product(s) identiﬁed in the

badge, and has been certiﬁed by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or

its compliance with safety and regulatory standards. iPhone is a trademark of Apple Inc., registered in the U.S. and other countries. The trademark

“iPhone” is used in Japan with a license from Aiphone K.K.

AndroidTM is a trademark of Google LLC. The Android robot is reproduced or modiﬁed from work created and shared by Google and used according

to terms described in the Creative Commons 3.0 Attribution License.

Made for iPhone®11 and iPhone X

For updated iOS, Humminbird®and Minn Kota®compatibility,

visit minnkotamotors.com

Made for

Android

™

EXAMPLE

Model Serial Number: ________________________________________________________________________________________

Controller Serial Number: _____________________________________________________________________________________

Purchase Date: _____________________________________________________________________________________________

Store Where Purchased: ______________________________________________________________________________________

MOTOR INFORMATION (For Consumer Reference Only)

minnkotamotors.com | 3

SAFETY CONSIDERATIONS

Please thoroughly read the user manual. Follow all instructions and heed all safety and cautionary notices. Use of this motor is only

permitted for persons that have read and understood these user instructions. Minors may use this motor only under adult supervision.

WARNING

You are responsible for the safe and prudent operation of your vessel. We have designed your Minn Kota product to be an accurate

and reliable tool that will enhance boat operation and improve your ability to catch ﬁsh. This product does not relieve you from the

responsibility for safe operation of your boat. You must avoid hazards to navigation and always maintain a permanent watch so you

can respond to situations as they develop. You must always be prepared to regain manual control of your boat. Learn to operate your

Minn Kota product in an area free from hazards and obstacles.

WARNING

Never run the motor out of the water, as this may result in injuries from the rotating propeller. The motor should be disconnected from

the power source when it is not in use or is o the water. When connecting the power-supply cables of the motor to the battery, ensure

that they are not kinked or subject to chafe and route them in such a way that persons cannot trip over them. Before using the motor

make sure that the insulation of the power cables is not damaged. Disregarding these safety precautions may result in electric shorts

of battery(s) and/or motor. Always disconnect motor from battery(s) before cleaning or checking the propeller. Avoid submerging the

complete motor as water may enter the lower unit through control head and shaft. If the motor is used while water is present in the lower

unit considerable damage to the motor can occur. This damage will not be covered by warranty.

WARNING

Take care that neither you nor other persons approach the turning propeller too closely, neither with body parts nor with objects. The

motor is powerful and may endanger or injure you or others. While the motor is running watch out for persons swimming and for ﬂoating

objects. Persons whose ability to run the motor or whose reactions are impaired by alcohol, drugs, medication, or other substances

are not permitted to use this motor. This motor is not suitable for use in strong currents. The constant noise pressure level of the motor

during use is less than 70dB(A). The overall vibration level does not exceed 2,5 m/sec2.

WARNING

It is recommended to only use Johnson Outdoors approved accessories with your Minn Kota motor. Using non-approved accessories

including to mount or control your motor may cause damage, unexpected motor operation and injury. Be sure to use the product and

approved accessories, including remotes, safely and in the manner directed to avoid accidental or unexpected motor operation. Keep all

factory installed parts in place including motor and accessory covers, enclosures and guards.

WARNING

When stowing or deploying the motor, keep ﬁngers clear of all hinge and pivot points and all moving parts. In the event of unexpected

operation, remove power leads from the battery.

KNOW YOUR BOAT

Keel

Bow

Hull

Bow

Stern

Port

Port Starboard

Starboard

Gunwale

Transom

Inboard

Outboard

Item /

Assembly Part # Description Qty.

Includes

1 - 4 2994864 BAG ASSEMBLY - (BOLT, NUT, WASHERS) 1

12263462 BOLT-MOUNTING-1/4X2 W/STG 6

22261713 WASHER-1/4 6

32263103 NUT NYLOK 1/4-20 MTG 6

42301720 WASHER-MOUNTING RUBBER 6

Includes

5 - 8 1378170 PROP KIT 2091170 PWR PRP 1

52091170 PROP-PRW (3 5/8") REAMED 1

62151726 WASHER-5/16 SS 1

72053101 NUT-PROP,NYLOC (MED) 5/16 SS 1

82092600 PIN-DRIVE 1.06" LG SS 1

9✖MOTOR ASSEMBLY 1

10 2390802 tLANYARD W/CARABINR, IP RMT 1

11 2994175 tREMOTE ASM, MICRO REMOTE 1

12 411690-1 tIPILOT 4.0 REMOTE 1

13 2394110 tTAG, MICRO REMOTE 1

14 490384-4 tCABLE, ETHERNET (M12-M12) 30' 1

15 490380-1 tCABLE, ETHERNET PIGTAIL-700 HD 1

Includes 16 2996300 TIE WRAP ASM, 60" 1

16 2206300 TIE WRAP, LOW PROFILE 4" 10

p2394911 tQCK REF.GUIDE, iP MICRO RMT BT 1

p2397115 tGUIDE-QCK REFERENCE IP 4.0 1

p2317127 INSTRC-INSTALL, RT PD SW 1

p2297165 MANUAL-DISCLAIMER,DWNLOAD INFO 1

p2294950 OBN & REMOTE PAIR INSTRUCT 1

p2207131 STANDARD QS SETUP GUIDE 1

pNot shown on Parts Diagram.

✖This part is included in an assembly and cannot be ordered individually.

tOnly available with models factory installed with GPS.

minnkotamotors.com | 5

INSTALLATION

INSTALLING THE RIPTIDE POWERDRIVE

Your new Riptide PowerDrive comes with everything you’ll need to directly install it to the boat. This motor can be directly mounted

to the boat or coupled with a Minn Kota quick release bracket for ease of mounting and removal. For installation with a quick release

bracket, refer to the installation instructions provided with the bracket. For compatible quick release mounting brackets and to locate

your nearest dealer, visit minnkotamotors.com. To install the motor directly to the boat, please follow the instructions provided in this

manual. Please review the parts list, mounting considerations and tools needed for installation prior to getting started. For additional

product support, please visit minnkotamotors.com.

INSTALLATION PARTS LIST

INSTALLING THE RIPTIDE POWERDRIVE

• #3 and #2 Phillips Screw Driver

• Drill

• 9/32” Drill Bit

• 7/16” Box End Wrench

• A second person to help with the

installation

• Pliers or Vice Grip

It is recommended that the motor be mounted as close to the centerline of the boat as

possible. Make sure the area under the mounting location is clear to drill holes and install

nuts and washers. Make sure the motor rest is positioned far enough beyond the edge of

the boat. The motor must not encounter any obstructions as it is lowered into the water

or raised into the boat when stowed and deployed. Consider a quick release or adapter

bracket with the installation of your motor. To view a list of accessories, please visit

minnkotamotors.com.

INSTALLING THE RIPTIDE POWERDRIVE

MOUNTING CONSIDERATIONS

TOOLS AND RESOURCES REQUIRED

View accessories

available for your

trolling motor at

minnkotamotors.com.

INSTALLATION

a. Make sure that the Power Cables from the battery

are disconnected, or that the breaker, if equipped,

is "o". Power CablesPower Cables

WARNING

Make sure the motor is mounted on a level surface and is not

connected to a power source.

NOTICE: The Riptide PowerDrive has no power switch. When the Power Cables are connected to a battery, the Riptide

PowerDrive is "on". When the Power Cables are disconnected from the battery, the Riptide PowerDrive is "o". If the Power

Cables are connected to a breaker, the Riptide PowerDrive is "on" when the breaker is "on" and "o" when the breaker is "o".

minnkotamotors.com | 7

INSTALLING THE RIPTIDE POWERDRIVE

d. Remove the Right Sideplate.

e. Swing the Left Sideplate out and away from the

Base Extrusion.

Right SideplateRight Sideplate

LeftLeft

SideplateSideplate

Base ExtrusionBase Extrusion

b. Place the mount on an elevated, level surface such

as a workbench or the tailgate of a pickup. The

motor, as removed from the box, should be in the

stowed position.

c. Remove the four sideplate screws using a #3 or #2

Phillips screwdriver. Two of these screws will be

located on each side of the mount.

DeployedDeployed StowedStowed

Sideplate ScrewSideplate Screw

NOTICE: This motor weighs approximately 30 lbs.

We recommend having a second person help with

the installation.

INSTALLING THE RIPTIDE POWERDRIVE

f. Place the mount as close to the centerline or keel of

the boat as possible. The motor can be installed on

either the Port or Starboard side of the boat based

on personal preference. Check

placement with the

motor in the stowed and deployed positions.

Review

the mounting considerations at the beginning of

the installation.

Deck of Boat

KeelKeel

g. When the motor is in the deployed position, make

sure that the Shaft is 1-1/2" out past the Gunwale of

the boat. The lower unit, when stowed and deployed

must not encounter any obstructions.

h. Check to be sure that the mount is level. Use the

Rubber Washers (Item #4) provided to create a level

surface if necessary.

i. It is recommended to mark at least 6 of the 12 holes

in the Base Extrusion and to have a minimum of

two bolts on each side that are located the farthest

apart. Ideal installation would allow for 6 bolts to be

used, with a minimum of 4.

j. Drill through the deck of the boat using a 9/32" Drill

Bit on the marked locations.

ITEM(S) NEEDED

#4 x 6

Drilling Locations

1-1/2"1-1/2"

MinimumMinimum

GunwaleGunwale

Shaft

Base Extrusion

minnkotamotors.com | 9

INSTALLING THE RIPTIDE POWERDRIVE

k. Put a 1/4-20 x 3-1/2" (Item #1) Mounting Bolt in

each of the drilled locations. The Mounting Bolt

should pass through the Base Extrusion and the

boat deck. If the Rubber Washers (Item #4) are

used, they should sit between the Base Extrusion

and boat deck. Make sure to secure the motor with

screws on each side of the Base Extrusion.

ITEM(S) NEEDED

#1 x 6

#4 x 6

l. Place a Flat Washer (Item #2) and then a Nylock Nut

(Item #3) at the end of each Mounting Bolt as shown

and secure. Make sure all hardware is secure.

#2 x 6 #3 x 6

NOTICE: To prevent seizing of the stainless steel

hardware, do not use high speed installation tools.

Wetting the screws or applying an anti-seize may help

prevent seizing.

8ITEM(S) NEEDED

Mounting Bolt

Rubber WasherRubber Washer

Boat DeckBoat Deck

Mounting Bolt

Rubber WasherRubber Washer

Nylock Nut

Flat Washer Boat DeckBoat Deck

INSTALLING THE RIPTIDE POWERDRIVE

m. Replace the Right Sideplate.

n. Swing the Left Sideplate back into its correct

position on the Base Extrusion.

Right SideplateRight Sideplate LeftLeft

SideplateSideplate

Base ExtrusionBase Extrusion

o. Replace the four Sideplate Screws using a #3 or

#2 Phillips screwdriver. Two of these screws will be

located on each side of the mount.

Sideplate ScrewSideplate Screw

Otros manuales para RIPTIDE POWERDRIVE

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Motor fuera de borda de MINN KOTA

MINN KOTA

MINN KOTA ULTERRA Manual de usuario

MINN KOTA

MINN KOTA TRAXXIS Manual de usuario

MINN KOTA

MINN KOTA FORTEX Manual de usuario

MINN KOTA

MINN KOTA PowerDrive Manual de usuario

MINN KOTA

MINN KOTA EO Manual de usuario

MINN KOTA

MINN KOTA Riptide Manual de usuario

MINN KOTA

MINN KOTA RIPTIDE ST Manual de usuario

MINN KOTA

MINN KOTA CAMO 45 Manual de usuario

MINN KOTA

MINN KOTA EDGE Manual de usuario

MINN KOTA

MINN KOTA PowerDrive Manual de usuario

MINN KOTA

MINN KOTA RIPTIDE ST Manual de usuario

MINN KOTA

MINN KOTA TERROVA Manual de usuario

MINN KOTA

MINN KOTA ULTERRA i-Pilot Manual de usuario

MINN KOTA

MINN KOTA RIPTIDE ST Manual de usuario

MINN KOTA

MINN KOTA TRAXXIS Manual de usuario

MINN KOTA

MINN KOTA ULTERRA Manual de usuario

MINN KOTA

MINN KOTA ULTERRA QUEST Manual de usuario

MINN KOTA

MINN KOTA ULTERRA Manual de usuario

MINN KOTA

MINN KOTA Ultrex 1368800 Manual de usuario

MINN KOTA

MINN KOTA TALON Manual de usuario

MINN KOTA

MINN KOTA CoPilot Manual de usuario

MINN KOTA

MINN KOTA FORTREX Manual de usuario

MINN KOTA

MINN KOTA Terrova 30 Manual de usuario

MINN KOTA

MINN KOTA ULTREX Manual de usuario

Manuales populares de Motor fuera de borda de otras marcas

Yamaha

Yamaha VF150 Manual de usuario

Sleipner

Sleipner SEP-IP30 Manual de usuario

Suzuki

Suzuki DF 40 Manual de usuario

SELVA MARINE

SELVA MARINE Corse Manual de usuario

TOHATSU

TOHATSU BFT 250A Manual de usuario

KONRAD

KONRAD Series 600B Manual de usuario

Mercury

Mercury 8 Bigfoot 4-Stroke Guía de instalación

Sleipner

Sleipner E-Vision Electric Thruster E300 Manual de usuario

Suzuki

Suzuki DF40A Manual de usuario

IST

IST 18.BF200D Manual de usuario

Side-Power

Side-Power SP 155 TC i Manual de usuario

Mercury

Mercury 40 FourStroke Manual de usuario

Quick

Quick BTR250 Manual de usuario

Yamaha

Yamaha VF90 Manual de usuario

Yamaha

Yamaha D150H Manual de usuario

Yanmar

Yanmar ZT350 series Manual de usuario

MotorGuide

MotorGuide X3-40 Manual de usuario

Mercury

Mercury 30 - 60 HP Manual de usuario