Mingda MD7000 Manual de usuario
3D SCANNER MANUAL V1.0
TYPE：MD7000
3/23
CONTENTS
1 INTRODUCTION....................................................................................................................4
1.1 Performance Parameter ......................................................................4
1.2 Features ..............................................................................................5
2 SYSTEM REQUIREMENTS .........................................................................6
2.1 Hardware.............................................................................................6
2.2 Software ..............................................................................................6
3. INSTALL DRIVE AND APPLICATION SOFTWARE.....................................7
3.1 Update Graphics Drive (Optional)........................................................7
3.2 Install 3D Scanner Drivers...................................................................7
3.3 Install 3D Scanner Application Software..............................................9
4. OPERATE APPLICATION SOFTWARE.....................................................10
4.1 The First Start....................................................................................10
4.2 The Main Interface of Application Software .......................................10
4.3 Prepare Status...................................................................................10
4.4 New ...................................................................................................12
4.5 3D Scanning Process........................................................................14
4.6 Colorize .............................................................................................19
4.7 Save ..................................................................................................20
5. FAQ............................................................................................................23
4/23
1INTRODUCTION
This 3D scanner product type is MD7000.
MD7000 3D scanner is an end-to-end solution that enables device to perceive the world in
3D sense. There are totally 3 sensors in 3D scanner, the right one is IR light projector, the
left one is depth camera and the middle one is RGB camera.
1.1 Performance Parameter
Operation Temperature 10-40 ℃
Data Interface USB 2.0/USB3.0
Operation Range 350-1200mm
Depth resolution@350mm 0.2mm
Depth resolution@500mm 0.6mm
Color image size 1280x1024(MAX)
Power Supply USB2.0/3.0
Power consumption 2.25W
Max Power Consumption 0.45A
Export Data Format STL, OBJ, PLY etc.
Grating Type Class 1 Laser Safety Product
Dimension without package 206x36x38mm
Dimension with package 250x136x80mm
Weight without package 0.327Kg
Weight with package 1.7Kg
5/23
1.2 Features
Multiple 3D Scanners Support
Real-time 3D reconstruction from multiple 3D scanner. This is particularly useful for use
during events when lots of people need to be scanned in a short time. More faster scan
speed and more higher scan accuracy. Please let manufacturer and distributor know if
you are interesting in it for the detail extension scheme.
Real-time Performance
3d scanner usage concept is similar to that of an ordinary video camera – simply move
around the object to be captured. However, instead of a video stream you get a complete
3d model in real-time.
Plug and Play Support
Use a high speed USB2.0/3.0 data cable to support data communication and power
supply.
Across all Scales
Modeling with 3d scanner scales from smaller objects such as human faces up to entire
rooms.
Metric Units
3D scanner performs the entire reconstruction in metric space. No need for freaky scaling
attempts. The result can be exported to various formats such as STL, OBJ, and PLY etc.
Texture Support
3d scanner is capable of capturing and processing the color information of the object
being scanned, as long as the sensor provides the necessary color stream.
High Quality Scan
To provide end users with convenient high quality scan solution.
Hand Operation
To provide end users with convenient and stability hand held experience.
6/23
2SYSTEMREQUIREMENTS
2.1 Hardware
It is strongly advised customer to configure the computer which meets the following
requirements at least.
CPU Reconstruction: 2 GB RAM, Quad core processor.
GPU Reconstruction: 2 GB RAM, Intel Core 2, CUDA 2.0 compatible graphics card,
with 1 GB of memory
Recommended PC: Windows 7 or later (64 bits), Intel i7, 4 GB RAM, NVIDIA GTX
560 or higher.
2.2 Software
The software is including,
Driver,
Application software
7/23
3. INSTALL DRIVE AND APPLICATION SOFTWARE
Please install all the related software at default C disc.
3.1 Update Graphics Drive (Optional)
Update graphics driver to the latest version. Choose custom installation and clean
installation. The website address of the driver of NVIDIA is as follows：
http://www.nvidia.com/Download/index.aspx?lang=en-us
3.2 Install 3D Scanner Drivers
1. Install driver according to the configuration of computer system;
2. Ensure computer is not connected to the scanner;
3. Double click the driver of 3D scanner, enter into the follow interface;
Click “next”.
8/23
Do not change the installation address, click “Install” only.
Wait for a moment.
9/23
Click “Finish”;
4. Restart Windows system;
5. Connect 3D scanner, if there is no notice about driver installation failed, then the
installation is succeed.
3.3 Install 3D Scanner Application Software
Double click the application software of 3D scanner and make sure DO NOT modify the
install path. Follow the install wizard to click "NEXT" to the final finish step.
10/23
4.OPERATEAPPLICATIONSOFTWARE
Note: all the screenshots are from less application software version , a slightly different
software will show in higher version, screenshots can be referenced.
4.1 The First Start
After the success of installation according to above steps, and make sure the
scanning instrument is connected to the computer, double click the desktop shortcut
to start the scanning instrument applications.
Activate the fully functional license (the steps need to contact the manufacturer or
distributor).
On the left of main interface of application software, input license information by click
"License" as follows,
License Email: input information, please contact the manufacturer and distributor.
License Key: input information, please contact the manufacturer and distributor.
After the success of the activation and continue the following steps.
4.2 The Main Interface of Application Software
Wait a few seconds, until presents the below diagram.
4.3 Prepare Status
Tabla de contenidos
