Mindeo MD6850 Manual de usuario

Note: 1. More details refer to User Manual. 2. For better readability, please print this document with laser printer. 3. Version: MD6850_QG_EN_V1.2.

MD6850 Image Barcode Scanner Quick Guide

Note

Parts of the scanner

①LED

②Beeper

③Exit window

④Trigger

⑤Release-hole of the cable

⑥Cable interface port

Installing the cable

1. Switch off the host;

2. Refer to the below pictures, connect the host with the scanner based on different cables;

3. Ensure that all connections are secure.

4. Switch on the host system. If the installation is successful, the beeper will beep and LED

will light.

RS232 cable

USB cable

Removing the cable

1. Find the release-hole;

2. Insert a thin wire into the hole and pull out the cable gently.

Return default parameters and version information

Default value initialization

Firmware version list

Note: If the host cannot receive data normally because the input speed of the scanner is

too fast, please scan the barcode below:

Programming instruction and example

Two programming modes have been provided as bellows:

Single-scan setting

Scan the appropriate

Single-scan setting

Example: To set Flow control to be XON/XOFF.

Multiple-scan setting

Scan “Option bar code”

Scan “The 1st character of option”

Scan “The 2nd character of option”

Scan “END”

Example: To set Flow control to be XON/XOFF.



A standard packing includes a scanner, a USB cable and a CD (or a user manual).



Accessories include a RS232 cable, a 5V adaptor.



Use a piece of dry and soft cloth when cleaning the scanner is in need.

Note: 1. More details refer to User Manual. 2. For better readability, please print this document with laser printer. 3. Version: MD6850_QG_EN_V1.2.

Reading techniques

1. Press and hold the trigger, the scanner projects a green LED square which allows

positioning the barcode within its field of view, and turns on the white LED for illumination.

2. When reading a barcode, the green LED square will be smaller when the scanner is closer

to the barcode and larger when it is farther from the barcode. Please hold the scanner at

an appropriate distance from the barcode, and center the green LED square on the

barcode.

3. On a successful barcode reading, the scanner will beep once, and the green LED square

and white LED will be turned off. Then the scanner transmits barcode message to the host.

Assembling the stand

Note: The stand is an accessory.

1. See the figure above, tighten the screws.

2. Bend the neck to the desired position for scanning.

3. Screw mounting: Screw one #10 wood screw into each screw-mount-hole until the base of

the stand is secured.

4. Tape mounting: ①Peel the paper liner off one side of each piece of tape and place the

sticky surface over each of the three rectangular tape holders. ②Peel the paper liner off

the exposed sides of each piece of tape and press the stand on a flat surface until it is

secure.

Vibration indication

Disable

Enable*

Note: The factory default settings are indicated with asterisks (*).

Beeper indication

Disable

Enable*

Volume of beeper

Low

Middle

High*

Scanning mode

Good-read off

Momentary*

Auto-detection

Illumination mode of Auto-detection

Always off

Enable illumination in low

light conditions

Always on*

Otros manuales de Lector de código de barras de Mindeo

Mindeo

Mindeo CS-I Series Manual de usuario

Mindeo

Mindeo MD20 series Manual de usuario

Mindeo

Mindeo MP80 Series Manual de usuario

Mindeo

Mindeo MD61 Series Manual de usuario

Mindeo

Mindeo MD20 series Manual de usuario

Mindeo

Mindeo MP83xx Manual de usuario

Mindeo

Mindeo MD65 Series Manual de usuario

Mindeo

Mindeo CS2290 Manual de usuario

Mindeo

Mindeo MD22 Series Manual de usuario

Mindeo

Mindeo ES168 Manual de usuario

Mindeo

Mindeo MS3390 Manual de usuario

Mindeo

Mindeo FS380 Manual de usuario

Mindeo

Mindeo MD62 Series Manual de usuario

Mindeo

Mindeo MP8200 Manual de usuario

Mindeo

Mindeo ES4200 Manual de usuario

Mindeo

Mindeo FS580 Manual de usuario

Mindeo

Mindeo MD6600 Manual de usuario

Mindeo

Mindeo MP725 Manual de usuario

Mindeo

Mindeo MP82 Series Manual de usuario

Mindeo

Mindeo MP80 Series Manual de usuario

Mindeo

Mindeo MS3590 Manual de usuario

Mindeo

Mindeo MP83 Series Manual de usuario

Mindeo

Mindeo MD6000 Manual de usuario

Mindeo

Mindeo MD6000 Manual de usuario

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario