1-1MimioProjector Service Manual
Chapter 1: Introduction
1. Introduction
1-1 Highlight
No Item Description
1 Dimensions • 357 (W) x 367 (D) x 135(H) mm (excluding foot)
2 Power Supply • Universal AC 100 – 240 V ,50-60 Hz
3Power Consumption
• Normal mode: 300 W+/-10%@110VAC
• ECO mode: 240 W+/-10%@110VAC
• Standby< 0.5W@ VGA out and RS232, LAN/Wireless
module
disable
4 Native resolution • Native Resolution: 1280 x 800(WXGA)
5 Projection lens • Fixed Lens(YM105)
6 Throw Distance • WXGA: 597mm –731mm±10mm, 654mm±10mm @87.2”
(TR=0.35)
7 Throw Ratio • WXGA: 0.35
8 Brightness • WXGA: typical: 2400 lumens, Minimum: 2080 lumens
9 Contrast ratio
• Typical 2000 : 1 (Native) (White @ 100% lamp power/
Black @ 100% lamp power)
• Typical 8000 : 1 (High Contrast mode) (White @ 100%
lamp power/Black @ 30% lamp power)
10 Color Wheel • 44mm diameter, 6 segments, R78 Y44 G81 C34 W55
B68_URD20VA
11 DMD chip • TI DMD 0.65” WXGA 2xLVDS S450
12 Native resolution • WXGA: 80.2”~96.6”, Optimization on 87.2”.(Diagonal)
13 System controller • TI DDP4421
14 Lamp Type • 240 Watt OSRAM E20.8 Lamp
15 Lamp Life • Normal mode: 3500 hours min, 50% survival rate
• Eco mode: 5000 hours min, 50% survival rate
16 Long cable supportable
• VGA cable, 10M (R/G/B with impedance:75Ω±10%,
H/V with impedance:50Ω±10%)
• HDMI cable: 10M
17 Uniformity • 80%(Typical)
• 65% (min.)
