P36203w Rev 07/20 4 of 4
The life science business of Merck operates
as MilliporeSigma in the U.S. and Canada.
Merck, Millipore, Filterjet, and Sigma-Aldrich are trademarks of Merck KGaA, Darmstadt, Germany
or its affiliates. All other trademarks are the property of their respective owners. Detailed
information on trademarks is available via publicly accessible resources.
© 2020 Merck KGaA, Darmstadt, Germany and/or its affiliates. All Rights Reserved.
Product Ordering
Purchase products online at SigmaAldrich.com/products.
Description Cat. No.
Filterjet™ Solvent Dispenser, 25 mm (1/pk)
XX6702500
Replacement nozzles for Filterjet™ Solvent
Dispenser: Jet, Fan, Cone Spray Nozzles XX67025RK
Filterjet™ handle/valve assembly (1/pk) XX6702501
Filterjet™ valve seals
Includes 1 valve seat, 3 cup packings XX6702502
Pressure tubing (polyethylene) with
1/4 in. NPT adapters, 1.8 m (6 ft) XX6702506
Adapter, 1/4 in. NPT male to 1/4 in.
OD tubing (1/pk) XX6702507
Tubing (polypropylene),
1/4 in. (6 mm) OD × 3 m (10 ft) XX6702508
Filter holder (25 mm) for Filterjet™
Solvent Dispenser (1/pk) XX4002500
Replacement parts for 25 mm filter holder
(see filter holder user guide) XX40025RK
Dispensing Pressure Vessels (1/pk)
5-Liter XX6700P05
10-Liter XX6700P10
20-Liter XX6700P20
1-Gallon XX6700P01
Dispensing Pressure Vessel Fitting Kit
Includes components listed below:
XX67000PK
Vent/relief valve (1/kit, item F), (1/pk) XX6700L24
Pressure gauge (1/kit, item G), (1/pk) XX6700L15
Hex nipple (2/kit, item H), (1/pk) XX6700125
Ball valve (2/kit, item I), (1/pk) YY2029348
Quick-disconnect nipple (2/kit, item J)
(1/pk) XX6700030
Tubing adapter (2/kit, item K) XX6700L11
PTFE tape,
1.3 cm (0.5 in.) × 660 cm (260 in.) TP0001326
Notice
We provide information and advice to our customers
on application technologies and regulatory matters
to the best of our knowledge and ability, but without
obligation or liability. Existing laws and regulations are
to be observed in all cases by our customers. This also
applies in respect to any rights of third parties. Our
information and advice do not relieve our customers of
their own responsibility for checking the suitability of
our products for the envisaged purpose.
The information in this document is subject to change
without notice and should not be construed as a
commitment by the manufacturing or selling entity, or
an affiliate. We assume no responsibility for any errors
that may appear in this document.
Contact Information
For the location of the office nearest you, go to
SigmaAldrich.com/offices.
Technical Assistance
Visit the tech service page on our web site at
SigmaAldrich.com/techservice.
Standard Warranty
The applicable warranty for the products listed in this
publication may be found at SigmaAldrich.com/terms.
