Miller Roughneck C-4015S Manual de usuario

OWNER’S MANUAL

2000 MILLER Electric Mfg. Co.

OMĆ200 386

May 2000

RoughneckEC-4015S Air-Cooled Gun

1. Specifications

Air-CooledGun For GMAW Welding

Note: Using mixed gases other than CO2reduces duty cycle ratings by 10-50%.

C-4015S Gun Feeds .045 To .068 in (1.2 To 1.7 mm) Wire

Duty Cycle Rating: 100%: 400 A With CO2Shielding Gas

Weight With 15 Ft (Heaviest) Power Cable: 10.3 lb (4.7 kg)

Ref. ST-800 797-C

2. Safety Precautions For GMAW Guns

A. Symbol Usage

Means Warning! Watch Out! There are possible hazards with this

procedure!The possible hazards are shown in the adjoining symbols.

This group of symbols means Warning! Watch Out! Possible ELECTRIC SHOCK and HOT PARTS hazards.

Consult symbols and related instructions below for necessary actions to avoid the hazards.

YMarks a special safety message.

.Means NOTE; not safety related.

B. GMAW Gun Hazards

WARNING

The symbols shown below are used throughout this manual to call attention to and identify possible

hazards. When you see the symbol, watch out, and follow the related instructions to avoid the hazard. The

safety information given below is only a summary of the more complete safety information found in wire

feeder and welding power source manuals. Read and follow all Safety Standards.

ELECTRIC SHOCK can kill.

1. Always wear dry insulating gloves.

2. Insulate yourself from work and ground.

3. Do not touch live electrode or electrical parts.

4. Repair or replace worn, damaged, or cracked gun

or cable insulation.

5. Turn off welding power source before changing

contact tip or gun parts.

6. Keep all covers and handle securely in place.

HOT SURFACES can burn skin.

1. Allow gun to cool before touching.

2. Do not touch hot metal.

3. Protect others from contact with hot metal.

FLYING PIECES OF METAL or DIRT can

injure eyes.

1. Wear safety glasses with side shields or face

shield.

WELDING WIRE can cause puncture

wounds.

1. Keep hands and body away from gun tip when

triggeris pressed.

OVERUSE can damage gun and void

warranty.

1. Followrated duty cycle.

2. Allow cooling period.

3. Reduce current or reduce duty cycle before

startingto weld again.

1. Read and follow these instructions and all safety

blocks carefully.

2. Have only trained and qualified persons install,

operate,or service this unit.

3. Call your distributor if you do not understand the

directions.

4. For WELDING SAFETY and EMF information,

read wire feeder and welding power source

manuals.

OM-200 386 Page 2

3. Gun Connection And Operation

Ref. ST-802 483-A / 802 626

1 Gun Securing Knob

2 Gun Block

3 Adapter

Loosen knob, insert adapter, and

tightenknob.

4 Gun Trigger Plug

5 Gun Trigger Receptacle

Insertplug into receptacle and tight-

en threaded collar.

6 Trigger Switch

Press switch to feed energized wire

and start gas flow.

OM-200 386 Page 3

4. Parts List

Ref. 802 630

Figure 4-1. Parts View

Description

Part

No.

Item

No.

Figure 4-1. Parts View

Quantity

1 200 282 NOZZLE 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 200 278 TIP, contact 1.2 mm wire 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2♦200 279 TIP, contact 1.4 mm wire 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2♦200 280 TIP, contact 1.6 mm wire 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2♦200 281 TIP, contact 1.7 mm wire 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 200 283 DIFFUSER, gas 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 198 856 INSULATOR, nozzle 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 198 858 LINER, 1.2 mm wire 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5♦198 859 LINER, 1.4/1.6/1.7 mm wire 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

♦OPTIONAL

Tabla de contenidos

Otros manuales de Sistema de soldadura de Miller

Miller

Miller Hydracool 1 CE Manual de usuario

Miller

Miller SQUAREWAVE 1000 Manual de usuario

Miller

Miller LMSW-52 Manual de usuario

Miller

Miller Bobcat 250 Diesel Manual de usuario

Miller

Miller LMSW-52 Manual de usuario

Miller

Miller SuitCase X-TREME 12VS Manual de usuario

Miller

Miller XMT 456 CC Manual de usuario

Miller

Miller AUTO ARC TIG 50A Manual de usuario

Miller

Miller TRUE BLUE MigMatic 260i Manual de usuario

Miller

Miller XPS 450 CE Manual de usuario

Miller

Miller MTT-1512HR Manual de usuario

Miller

Miller Dynasty 210 DX Manual de usuario

Miller

Miller GW-55C Manual de usuario

Miller

Miller XR-Aluma-Pro 15W Manual de usuario

Miller

Miller INTEGRA 350 Professional Manual de usuario

Miller

Miller S-74DX Manual de usuario

Miller

Miller Maxstar 400 Manual de usuario

Miller

Miller XR - Pistol - Pro Manual de usuario

Miller

Miller STR 500 Manual de usuario

Miller

Miller EnPak A30 GBW Manual de usuario

Miller

Miller Bobcat 200 Air Pak Manual de usuario

Miller

Miller WC-115A Manual de usuario

Miller

Miller Dynasty 280 Manual de usuario

Miller

Miller OM-257 675D Manual de usuario

Manuales populares de Sistema de soldadura de otras marcas

Berner

Berner PLASMACUT 54 Manual de usuario

Pro Spot

Pro Spot PR-155 Manual de usuario

Forney

Forney 210 Manual de usuario

Thermal Arc

Thermal Arc 400S Manual de usuario

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manual de usuario

GYS

GYS PROTIG 201 AC/DC Manual de usuario

TAFA

TAFA 30*8B35 Manual de usuario

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manual de usuario

ESAB

ESAB Buddy Arc 145 Manual de usuario

CIGWELD

CIGWELD 636804 Guía rápida

Red-D-Arc

Red-D-Arc DC-400 Manual de usuario

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manual de usuario

Elettro

Elettro HI-MIG 3000 SYNERGIC Manual de usuario

WIA

WIA Weldmatic 270 CP132-2 Manual de usuario

Sonics

Sonics H520T Manual de usuario

NewArc

NewArc RT2000 Guía de inicio rápido

Hypertherm

Hypertherm powermax1000 Manual de usuario

Lincoln Electric

Lincoln Electric POWER WAVE I400 Manual de usuario