Millenium MPS-500 USB Manual de usuario

MPS-500 USB

e-drum set

assembly instructions

Musikhaus Thomann

Thomann GmbH

Hans-Thomann-Straße 1

96138 Burgebrach

Germany

Telephone: +49 (0) 9546 9223-0

E-mail: [email protected]

Internet: www.thomann.de

17.07.2015, ID: 277656 (V2)

Table of contents

1 Safety instructions.......................................................................................................................................................................................................... 4

2 Contents of package....................................................................................................................................................................................................... 5

3 Assembly.............................................................................................................................................................................................................................. 6

4 Protecting the environment.................................................................................................................................................................................... 11

Table of contents

MPS-500 USB

1 Safety instructions

DANGER!

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children.

Choking hazard!

Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and

choke!

Never let children unattended use electrical devices.

Safety instructions

e-drum set

2 Contents of package

Before you assemble your kit, make sure the contents of package is complete according to the following list.

Millenium MPS-500 e-drum set

nMillenium MPS-500 e-drum module

nPads:

1 × 8" snare / stereo

3 × 8" tom / mono

1 × 8" kick

1 × 8" hi-hat

1 × 12" crash with choke function

1 × 12" ride

nOptical hi-hat controller

nDrum pedal

nRack with pad brackets

nComplete pad wiring

nMains adapter

Contents of package

MPS-500 USB

3 Assembly

Overview

Loosen the wing nuts on the holder clamps before inserting the tubes. Mount the various elements in the specified sequence.

The positions of the pads, cymbals, etc. are shown in the illustration below.

Setting up the rack

CAUTION!

Danger of cuts on hands and fingers

When plugging the connections, take care for sharp edges on the metal pipes, screws etc.

Assembly

e-drum set

1 Adjust the height of the holder clamps for the horizontal crossbar and three wing arms according to your pre‐

ferred playing position. Mount the horizontal crossbar and three wing arms and tighten the retaining screws.

2 Insert the two lateral supports into the holder clamps provided for this purpose. Make sure that the lower ends of

the supports are resting flush on the floor. Then tighten the retaining screws.

3 Position the holder clamps for the individual pads. Then tighten the retaining screws.

4 Turn the L-rods into a suitable position for mounting the pads. Then tighten the retaining screws.

5 Insert the crash pad, ride pad and hi-hat pad supports into the respective holder clamps on the rack. Secure the

supports at the desired vertical position using the retaining screws.

6 Loosen the retaining screws at the support joints and orient the supports so as to match your preferred playing

position. Then re-tighten the retaining screws.

Assembly

MPS-500 USB

Mounting pads on the rack

1. Attach the supplied L-pieces to the pads. First, tighten the wing nuts on the pads hand-tight.

2. Then slide the plastic ends of the L-pieces up to the stop into the designated terminals on the rack.

3. Align the pads on the rack to meet your needs, then tighten the wing nuts of the pad brackets and the bolts of the pad

terminals on the rack evenly.

Mounting cymbals on the rack

Assembly

e-drum set

1. Put the three cymbal holders as shown into the designated terminals on the rack.

2. Tighten the screws of the terminals firmly and evenly.

3. Unscrew the wing nuts (9) from the cymbal holders and take the felt washers (10) off the holders.

4. Place the cymbals on their supports as illustrated.

5. Put the felt washers (10) on top of the cymbals, and secure the pads on their supports using the respective wing nuts (9).

Make sure that the connector block on the underside of the cymbals is not stuck to the cylinder bolt of the counter-holder.

Mounting the drum module on the rack

1. Put the drum module up to the stop into the empty terminal of the left side arm.

2. Align the module and tighten the wing nut of the terminal.

Mounting the bass pedal

1. Snap the two metal rods into the holes provided on the frame of the pedal.

2. Place the beater into the hole provided on the rotary head of the kick drum pedal and tighten the clamp with the drum key

firmly.

Assembly

MPS-500 USB

Bass drum and hi-hat

1. Position the bass drum pad centred under the rack. Position the bass drum pedal centred in front of the pad.

2. Place the hi-hat pedal to the left of the bass drum pedal.

Set-up and cabling

Set up the rack, the pads and the cymbals according to your needs. As a final step, all triggers need to be wired to the drum

module. Note the labelling on the drum module and the colour markings of each cable.

Assembly

e-drum set

Otros manuales para MPS-500 USB

Tabla de contenidos

Otros manuales de Tambor de Millenium

Millenium

Millenium MD-70 Manual de usuario

Millenium

Millenium DT-600 Manual de usuario

Millenium

Millenium MPS-250 USB Manual de usuario

Millenium

Millenium RT-1 Manual de usuario

Millenium

Millenium MPS-400 Manual de usuario

Millenium

Millenium MPS-150X Manual de usuario

Millenium

Millenium MPS-750X PRO Manual de usuario

Millenium

Millenium HD-100 Manual de usuario

Millenium

Millenium MPS-500 USB Manual de usuario

Millenium

Millenium MPS-850 Manual de usuario

Millenium

Millenium DT-600 Manual de usuario

Millenium

Millenium SIXTA PAD Manual de usuario

Manuales populares de Tambor de otras marcas

Yamaha

Yamaha RX-21 Manual de usuario

Roland

Roland TD-9K Manual de usuario

Sudoku

Sudoku LEXUS Manual de usuario

Roland

Roland CR-80 Manual de usuario

V-Drums

V-Drums V-Tour TD-9KX2 Manual de usuario

Yamaha

Yamaha DTXPLORER Manual de usuario

Cherub

Cherub WRW-206 Manual de usuario

Opti-Med

Opti-Med JM-D1 Series Manual de usuario

Roland

Roland CR-80 Manual de usuario

Yamaha

Yamaha DTS70 Manual de usuario

Yamaha

Yamaha DTXPRESS Manual de usuario

Roland

Roland RM-2 Manual de usuario

ATV

ATV aD5 Manual de usuario

Alesis

Alesis DM Pro Kit Manual de usuario

Roland

Roland TR-808 Manual de usuario

Roland

Roland SPD-20 Manual de operación y mantenimiento

Koma Elektronik

Koma Elektronik RH 301 Manual de usuario

Roland

Roland TR-8 Manual de usuario