Milestone Systems Husky M20 2017 R1 Manual de usuario

Milestone Systems

Milestone Husky™2017 R1

M20 Hardware and Service Guide

Milestone Husky - M20 Hardware and Service Guide

Contents

About this guide......................................................... 4

XProtect Management Application Husky items ......... 5

Network switch (explained) .................................................. 5

Network switch properties .................................................... 6

Husky IO Module (explained) ................................................ 8

Husky IO Module setup.......................................................... 8

Milestone Husky Assistant ......................................... 9

Milestone Husky Assistant properties.................................... 9

Choose your language ......................................................... 10

Replace a disk ..................................................................... 10

Create a Husky Support .zip file........................................... 10

Reconfigure ......................................................................... 11

Upgrade ................................................................... 12

Milestone Husky - M20 Hardware and Service Guide

Trademarks

XProtect is a registered trademark of Milestone Systems A/S.

Microsoft and Windows are registered trademarks of Microsoft Corporation. App Store is a service

mark of Apple Inc. Android is a trademark of Google Inc.

All other trademarks mentioned in this document are trademarks of their respective owners.

Disclaimer

This text is intended for general information purposes only, and due care has been taken in its

preparation.

Any risk arising from the use of this information rests with the recipient, and nothing herein should

be construed as constituting any kind of warranty.

Milestone Systems A/S reserve the right to make adjustments without prior notification.

All names of people and organizations used in the examples in this text are fictitious. Any

resemblance to any actual organization or person, living or dead, is purely coincidental and

unintended.

This product may make use of third party software for which specific terms and conditions may

apply. When that is the case, you can find more information in the file

3rd_party_software_terms_and_conditions.txt located in your Milestone system installation

folder.

Milestone Husky - M20 Hardware and Service Guide

About this guide

This hardware and service guide for Milestone Husky™ serves as a point of reference to the

Milestone Husky software and Milestone Husky hardware. This guide describes the Milestone Husky

specific items in the XProtect Management Application and the Milestone Husky Assistant, that

helps you maintain and reconfigure your system.

Milestone Husky - M20 Hardware and Service Guide

XProtect Management Application Husky items

XProtect Management Application

Husky items

Network switch (explained)

The network switch with PoE+ camera ports are optional.

The network switch is available as an eight or sixteen ports option.

When you have connected your cameras and other devices to the built-in Power over Ethernet

(PoE+) capable network switch, you can use the Network Switch node in the Management

Application navigation pane to get an overview of connected cameras and devices. You can monitor

the current status of the ports and connected devices. It can help you find an IP address or

troubleshoot a camera or another device. You can also monitor the PoE power consumption.

The Network Switch functionality gives you access to:

Switch status:

PoE summary information

A list overview of all the available ports

A list overview of all the connected devices

Port-specific information about the power consumption

Switch management:

Enable or disable a port

Enable or disable PoE for a port

Lock a port to a MAC address

Restart of a device

Milestone Husky - M20 Hardware and Service Guide

XProtect Management Application Husky items

Network switch properties

The Network switch status in the top of the screen gives you an overview of the following

information for the switch:

Status element

Description

Current power usage

A sum of all the power in Watt used by the connected devices.

Max power used

A maximum of all the power in Watt used by the connected

devices.

The value is updated after any change to the ports.

Total power available

The total amount of power in Watt the switch can deliver.

The Port status list in the middle of the screen gives you an overview of the following information

for all ports:

Status element

Description

Port number

The unique port ID.

Device and IP address

The name and IP address of the device connected to the port.

Before a device is added to the system the status is Unknown.

If a device is moved from PoE camera port 1-8 to PoE camera

port 9-16 or the opposite, the device gets a new IP address and

the device status changes to Unknown. As a result, you must

add the device to the system again.

(PoE camera ports are optional)

Current power usage

Current power consumption in Watt.

Max power used

Maximum value of the power consumption in Watt.

The value is reset after a device is restarted or disconnected for

one minute.

MAC address

Shows the physical address (MAC address) of the device

connected to the port.

Milestone Husky - M20 Hardware and Service Guide

XProtect Management Application Husky items

To learn more about a specific port and the connected device, select the relevant row and review

the Port details at the bottom of the screen. The following information appears:

Status element

Description

Port number

Shows the port number of the selected row in the Port status list

above.

State

Shows the current port state. Statuses may be:

Connected with power

Connected

Disconnected

PoE+

Shows if the connected device uses the PoE+ standard.

Enabled

Port setting: Enable or disable the port.

PoE enabled

Port setting: Enable or disable PoE.

MAC address

Shows the physical address (MAC address) of the device

connected to the port.

Lock port to MAC address

Port setting: Locks the port to the connected device.

Other devices will not be able to use this port.

Restart device

Sometimes you need to restart a camera to apply the settings

you have changed in the camera software. If your camera is

to restart your device.

The Restart device button helps you do that. There is a wait

state of ten seconds from power off to power on.

Milestone Husky - M20 Hardware and Service Guide

XProtect Management Application Husky items

Husky IO Module (explained)

The Husky IO Module is a part of your Milestone Husky product. It is a built-in IO module with four

inputs and four outputs and is listed in the Management Application navigation pane under

Hardware Devices as a camera. You can configure the module for use with event notifications.

Husky IO Module setup

The module is installed and added as a hardware device with the following details:

Hardware Device Name

Husky IO Module

Address

127.0.0.1

Port

1337

Device Driver

M20

If you have deleted the Husky IO Module in the Management Application and want to add it again,

you must use the details in the table above. You can also use the Reconfigure (on page 11)

option in the Milestone Husky Assistant.

Connection diagram

Milestone Husky - M20 Hardware and Service Guide

Milestone Husky Assistant

You can use the Milestone Husky Assistant application for status, configuration and maintenance of

your Milestone Husky system. The Milestone Husky Assistant can be found alongside the

Management Application and the Smart Client on the Windows desktop.

Milestone Husky Assistant properties

The Milestone Husky Assistant has these features available:

Navigation element

Description

Overview

You can change the language in which Milestone Husky Assistant

appears.

Storage Management

A list of disks available for video storage.

You can see the storage status and if the disk is configured for

use with Milestone XProtect.

When you replace a disk you can format it and prepare it for use

with Milestone XProtect .

Installed Components

A list of installed Milestone software components and versions.

Support

Lists the system information you need if you contact Milestone

Support.

Reconfigure

This will help you reconfigure the network, time synchronization

and storage. Additional device drivers will also be installed.

SLC

License information.

The products' software license code (SLC).

Firmware

Milestone Husky firmware version.

Serial number

The products' hardware serial number.

MAC

The products' network switch physical address (MAC address).

Milestone Husky - M20 Hardware and Service Guide

Milestone Husky Assistant

Choose your language

Select your preferred language:

1. Select the Overview tab.

2. Select your preferred language from the list of available languages.

Some of the languages require a restart of the assistant. Milestone Husky Assistant uses the

Windows regional settings, so if your settings are English, the Milestone Husky Assistant chooses

English by default.

Replace a disk

Replace a disk for use in Milestone XProtect:

3. Select the Storage Management tab.

4. Select left or right from the list of disks available for video storage.

5. Click Next to format the disk and prepare it for use with Milestone XProtect.

The system only supports WD Purple Surveillance Hard Drive.

Create a Husky Support .zip file

If you contact Milestone Support, create a Husky Support .zip file that lists the system information

you need:

1. Select the Support tab.

2. Click Collect to start the creation of a Husky Support .zip file. When created, save it at

your preferred location.

3. Provide Milestone Support with the Husky Support .zip file, when they assist you in

troubleshooting a problem.

Tabla de contenidos

Otros manuales de Hardware de red de Milestone Systems

Milestone Systems

Milestone Systems Husky M30 Manual de uso y cuidado

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario