Mikropor Mia Air Manual de usuario

AIR PURIFIER AND

ILLUMINATION DEVICE

USER MANUAL

www.miaair.com

Dear Customer,

Thank you for purchasing the Mia Air Lamp. The product

you have purchased has been designed to serve you without

problems for a long time.

To use the high-quality Mia Air Lamp effectively and safely,

that has been manufactured to high standards, please read

the user manual to its full extent.

Please keep this manual in a safe place for further use.

CONTENTS

PURPOSE OF USE 3

SAFETY 3

DEVICE SPECIFICATIONS 4

TECHNICAL SPECIFICATIONS 4

DEVICE COMPONENTS 5

OPERATING INSTRUCTIONS 6

MOBILE CONTROL 6

MOBILE APPLICATION SCREEN ICON

INSTRUCTIONS 7

NEW DEVICE ADDING SCREEN 8

OPERATION RULES 10

DEVICE MAINTENANCE AND CONTROLS 11

ACTIVATED CARBON & HEPA FILTER REPLACEMENT 11

PURPOSE OF USE

It is used to provide air that has been puriﬁed of dust, particles and disturbing smells

and for lighting. Mia Air Lamp can be used in all environments in which healthy air is

required such as hospitals, workplaces, homes, schools etc.

SAFETY

Please make sure you read this manual before starting the device.

To decrease the risk of electrocution, injury and ﬁre, take notice of the following warnings.

*Work on electrical components must only be conducted by authorized service

technicians!

* Ensure that the power supply is disconnected prior to working on this device!

*It may cause danger if the device is used out of its purpose by non-qualiﬁed

people!

Pay attention to user qualiﬁcations!

*So as not to damage the device, do not use the device without ﬁlters!

• Start the device in accordance with the voltage and frequency values on the device

label. Starting the device with a voltage and frequency other than the indicated

values may damage the device and form the risk of electrocution.

• Ensure that all electrical cables located outside the device are secure against

sustaining damage. Do not start the device if there is a problem with a cable or the

grid connection.

• Do not start the device without installing all components.

• Turn the device off if you will not be using it for a longer time.

• Turn your device off when you are going to clean, maintain or change the filter on

your device.

• Do not start your device in areas in which there is a danger of explosion.

• Ensure that the air intake and outlet are clear.

• Do not place external items in the device.

• Do not cover the device in course of operation.

• Do not start your device with wet or damp hands.

Power Supply 220-240 V, 50 Hz and 110-130 V, 60 Hz

Energy Consumption 25-105 W

Measurements (NET) 58x58x158 cm / Packing: 59x59x82 cm

Weight 16 / 18 kg

Air Volume 60-450 m3/h

Sound Level (Auto Mode) <60 dB (A)

Fan Motor Recurvate fan centrifuge, with heat control, Suitable for

continuous use

Control Mode Auto, Turbo, Economical, Silent, Manuel

Air Intake 360 degrees on the unit

Lighting Adjustable Light Intensity (Optional)

Casing Material Impact Resistant ABS, Antistatic Powder Coated

Aluminium

Air Sensors VOC, PM1 / PM2.5 / PM10, CO2, Temperature, Humidity

Filter Replacement Indicator Mia Air Lamp Mobile Application

Remote Control Can be controlled by remote control device and mobile

application

Wi-Fi Connection 2,4 Ghz Wi-Fi band, with 802.11 b / g / n router

Activated Carbon & HEPA

Filter Speciﬁcations

Pre-Filter G4

Activated Carbon Filter 500 g

HEPA H14 (standard) ≥ %99,999 @ ≥ 0, 3 µm

Product Colors Illumination Group: Light Oak / Body: Cream /

Legs: Light Oak

Illumination Group: Dark Walnut / Body: Anthracite /

Legs: Walnut

DEVICE SPECIFICATIONS

TECHNICAL SPECIFICATIONS

Mia Air Lamp reduces the amount of dust and particles in its operating environment with

the air ﬁltration principle. The fan takes air in through the front ﬁlter and diverts it into the

carbon ﬁlter and from there to the HEPA ﬁlter. The ﬁltered air passing through the diffuser

provides and ensures clean and puriﬁed, and thus healthy air conditions.

Tightening Tool

Top Cover

Illumination Group

Filter

Control Panel

Fan

Air Intake Grille

Static Legs

Leg Bracket

Static Legs

Leg Stabilizer

Cable Cover

*Mikropor deserves the right to make changes on the visual and technical design.

IR Receiver

DEVICE COMPONENTS

The Mia Air Lamp Mobile Application allows you to control your air puriﬁer from anywhere

around the world. Depending on the properties of your smart phone and service

parameters some functions may not be supported. The Mia Air Lamp Mobile Application

is suitable for the following devices:

• ANDROID (ICS 4.12 Jellybean or higher versions)

• iOS (6.0 or higher versions - iPhone 4S or later)

Before connecting the Mia Air Lamp Mobile Application:

A Wi-Fi router must be installed in range of the device for the Mia Air Lamp Mobile

Application to be used.

Wi-Fi router properties:

2,4 GHz Wi-Fi (Network security; on, WEP, WPA and WPA2)

Compatible with 802.11 b / g / n router on the network band.

Ensure that you have an available Wi-Fi password.

During installation, the air puriﬁer, the wireless router and the mobile device must be 10

meters close to each other. A weak connection between the air puriﬁer, the wireless router

and the mobile device may prevent installation. Before connection, the Smart Network

Connection must be temporarily deactivated. It may be activated after connection is

completed.

Main Screen: It is the screen that all data transmitted over the Internet is viewed and the

device is remotely controlled.

MOBILE CONTROL

Fan On/Off Button: Fan starts to run when pressed, stops when

pressed again.

Fan Speed Increase Button: When pressed, device switches to

manual mode and fan speed increases.

Fan Speed Decrease Button: When pressed, fan switches to

manual mode, fan speed decreases.

Light On/Off Button: The light turns on when pressed, turns off

when pressed again.

Light Level Increase Button: Light level increases when pressed.

Light Level Decrease Button: Light level decreases when pressed.

OPERATING INSTRUCTIONS

Supply electricity to the device only after attaching the power supply socket. Press the

On/Off button located on the cable or remote control device so that the device will start

to work. The fan control and light level are carried out in ﬁve different modes.

List of Devices

Area that devices added to

the application are listed, and

device selection is made. The

application allows access to

multiple devices.

Add New Device

The screen used to add new

devices.

Mode Buttons

Control buttons which could

be used to switch between

modes.

Settings

Screen which devices options are set.

Power Button

Button used to switch the device on

and off.

Filter Status Indicator

When the ﬁlter needs to be

replaced, the ﬁlter status bar

changes into an order button.

Fan Level Indicator

Screen which shows the fan level

according to the mode that device is

operating on.

Sensor Indicators

Area showing sensor data and ﬁlter

MOBILE APPLICATION SCREEN ICON INSTRUCTIONS

Silent Mode: The fan control is done automatically in order to operate at the lowest

sound level according to the air quality index measured by the device. The device can be

switched to silent mode by pressing the “mode” button.

Turbo Mode: Fan control is done automatically in a way to respond to the pollution in the

fastest way without seeking sound comfort according to the air quality index measured

by the device. The device can be turned to the turbo mode by pressing the “mode” button.

Economic Mode: Fan control is automatically performed by the device according to the

air quality index measured by the device, low noise level and best energy eiciency. The

device can be brought to economy mode by pressing the “mode” button.

AutoMode:Fan controlis doneautomatically accordingto theair qualityindexmeasured

by the device, so that both energy saving, sound comfort and cleaning performance will

be optimum. The device can be turned into auto mode by pressing the “mode” button.

Manual Mode: Fan control is performed by the user. There are six dierent speeds where

air volume can change manually. The device can be changed to manual mode by

pressing the “mode” button. Press the up arrow button on the right to increase the speed

and press the down arrow button pressing the “mode” button.

Turbo Mode

Economic Mode

Auto Mode

Manual Mode

ON/OFF Button

Silent Mode

NEW DEVICE ADDING SCREEN

1. Screen 2. Screen

New device adding process needs to be

for one time to be able to connect your

device to the Internet. When your device

is switched on, an access point called

mikropor_air_XXXXXXX broadcasts for

three minutes. Once you have connected

to this access point with your mobile

device, it will automatically switch to the

settings screen.

The screen that the device is set in

installation mode. When you connect to

your device’s Wi-Fi network, this screen

enables you to connect your device to your

mobile application. Device information

setting is managed on this screen.

Device Name

It comes up automatically when the device is connected,

and it can be updated.

Back Button

When clicked, it opens the device page.

SID and Password

The wireless network required for your device to send data

over the Internet.

Choose Wi-Fi – Wi-Fi Password

Mia automatically scans active Internet connections and

puts the strongest connection at the top of the list. The

password for the wi-ﬁ network that Mia will be connected

must be entered here.

Device Serial

The area in which the serial number is entered by the user.

It must be in Pxxxxxxxxxxx format and the same character

length. The serial number sticker is placed on the device.

It is the permission box needs to be checked so that the

device can send data over the Internet.

Next-Taste

The button that enables you to move on to the next screen

after completion of the settings.

Tabla de contenidos

Idiomas:

Otros manuales de Purificador de aire de Mikropor

Mikropor

Mikropor Mia Air MIKROPOR-MIA-102 Manual de usuario

Mikropor

Mikropor Mia Air AP107 Manual de usuario

Mikropor

Mikropor Mia Air Compact Manual de usuario

Manuales populares de Purificador de aire de otras marcas

IKEA

IKEA UPPÅTVIND Manual de usuario

Nash

Nash AP-1 PureSmart Manual de usuario

LG PH-U450 Series Manual de usuario

DeLonghi

DeLonghi DDSX 220WFA Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Manual de usuario

Sharp

Sharp FU-40SE Manual de usuario

Philips

Philips AC2721 Manual de usuario

Hitachi

Hitachi EP-A3000 Manual de usuario

TruSens

TruSens Z-2000 Manual de usuario

Motorola

Motorola MBP87SN Manual de usuario

Beko

Beko ATP 7100I Manual de usuario

Carrier

Carrier INFINITY 1620 Manual de usuario

AtmosAir

AtmosAir P2002 Manual de usuario

Winix

Winix NK300 Manual de usuario

Friedrich

Friedrich C-90A Instrucciones de funcionamiento e instalación

Surgically Clean Air

Surgically Clean Air JADE2.0 Manual de usuario

Base aire

Base aire 555 Pro Manual de usuario

Champion

Champion CP25 Manual de usuario