
16 17
Recording Time
High Quality Playing
Mode SP
Low Quality Playing
Mode LP
About 240 minutes
About 1080 minutes
Dimension 105(L)x30(W)x16(T) mm
Weight About 36g (excluding batteries)
Battery 2 x alkaline DC3V "AAA"
The highest serial number
of recorded messages 127
Output power (max) 80Mw (Distortion<10%, 32ohm)
Frequency range of
Recording/replaying 500Hz-3500Hz
Input Built-in microphone or single-track
microphone socket, about 2k ohm
Output Stereo earphone, about 32 ohm
Operating 0-40
1. Large memory space 64M.
2. Record up to 99 voice messages.
3. MP3, WMA and ADPCN format.
4. Blue backlight.
5. Record indication.
6. Music playing function.
7. SP and LP record format available.
SP 240m LP 1080m
8. Loop mode.
9. 7 play modes:
NATURAL, ROCK, POP, CLASSIC,
SOFT, JAZZ, DBB (dynamic bass
boost).
NOTE: If you find that "OFF" shutdown picture arises after booting up, this may
be caused by program loss due to incorrect operation, in which case carry out
troubleshooting according to the following steps:
1 Connect the USB line and enter Digital Voice recorder after 2 seconds. Fully
format the Digital Voice recorder (in Windows 2000 and Windows XP, please
select FAT other than FAT32 as file format)
2 Insert the enclosed CD into the CD-ROM and copy the file named '*nanfla$.ugr"
from the CD into the Digital voice recorder.
3 Upon completion, right-click the Digital voice recorder icon to display the pull-
down menu. Click "eject" to exit USB mode (or press the MODE key to exit) and
a "Unplug" picture will emerge on the display (It is recommended to use the
"eject" function on the pull-down menu to perform Firmware Update).
A arrow icon has been display when the unit connected to the computer. Right
click on the arrow and select the "Unplug an deject..". Then follow the instructions
from the computer manual to eject the unit.
4 The update process will take 5-8seconds. A "ON" is displayed to indicate update
succeeded and enter the USB mode again 8 seconds later with a update
description (including update version and date) under the root directory of
removable disk.
5 You can copy MP3 or other files into the Digital voice recorder only when the
"PC USB" is displayed (Note: Never pull out the USB line or press the MODE
key or use the eject function when the "busy" picture still on the display).
FUNCTION DESCRIPTION
ALTERNATIVE TO EJECT THE UNIT
1 An arrow icon is displayed when connected to your PC. Right click on the arrow
and select "Unplug and eject".
2. Then follow the instructions from the PC user manual to eject the unit.
10. Repeat mode (A-B): Repeat certain
segments of a song.
11. Delete: delete existing MP3 music
files and voice files, individually or
all.
12. Volume adjustment to 15 levels.
13. USB connectable for uploading and
downloading
Voice files (including music and
MP3 files).
14. Built-in speaker.
15. Low battery indication.
16. HOLD key lock.
SPECIFICATIONS
CONNECTION TO YOUR PC TROUBLE SHOOTING