Migatronic OMEGA 3 YARD PULSE Manual de usuario

QUICKGUIDE

OMEGA³ YARD BASIC

Setting the welding process

Press and hold (11A) to open for setting the welding process. Choose parameter by turning (10).

Set the chosen value by turning (11). To close this function, press (11A) brieﬂy.

Press (12) brieﬂy to turn display of Fxx (F = function) parameter names on/off.

50113783 A

MIG/MAG parameters

Actual welding current (A)

Figure 1

Table 1

Process 1.0 mm 1.5 mm 2.0 mm 3.0 mm

Material Wire Gas S

(m/min)

(V)

(m/min)

(V)

(m/min)

(V)

(m/min)

(V)

Fe 0.8 CO22.5 19.0 4.5 19.5 7.0 21.0 11.0 27.0

Fe 1.0 CO22.0 18.0 2.5 19.0 3.0 20.0 4.5 21.0

Fe 1.2 CO21.0 18.0 2.0 20.0 2.5 21.0 3.5 22.0

Fe 0.8 ArCO23.0 16.0 6.0 18.0 7.5 19.5 11.0 20.0

Fe 1.0 ArCO22.0 15.0 3.0 16.0 4.0 17.0 6.0 19.0

Fe 1.2 ArCO21.5 16.5 2.5 17.5 3.5 18.0 4.5 20.5

Fe 1.6 ArCO21.0 17.0 2.0 18.0 2.5 18.5

CrNi 1.0 ArCO23.0 15.0 4.0 16.0 6.0 17.0 8.5 20.0

CrNi 1.2 ArCO22.0 15.0 3.0 16.0 3.5 16.5 6.0 18.0

AI 1.0 Ar 4.0 14.5 6.0 15.0 7.5 16.0 9.0 19.0

AI 1.2 Ar 3.5 13.0 5.0 15.0 8.0 16.0 9.0 17.0

Process 4.0 mm 6.0 mm 10.0 mm

Material Wire Gas S

(m/min)

(V)

(m/min)

(V)

(m/min)

(V)

Fe 0.8 CO213.0 29.0 18.0 30.0 24.0 37.0

Fe 1.0 CO26.0 22.5 9.0 24.5 14.0 32.0

Fe 1.2 CO24.5 23.0 7.5 28.5 11.0 36.0

Fe 0.8 ArCO214.0 26.0 18.0 31.0 24.0 33.0

Fe 1.0 ArCO28.0 20.0 11.5 26.5 16.0 30.0

Fe 1.2 ArCO25.5 20.5 8.0 29.0 10.0 32.0

Fe 1.6 ArCO23.0 19.5 4.0 22.0 5.5 29.0

FeFlux 1.2 ArCO26.0 21.0 8.0 25.0 11.0 28.0

CrNi 1.0 ArCO29.0 25.0 10.0 27.0

CrNi 1.2 ArCO28.0 24.0 10.0 24.0 12.0 31.0

AI 1.0 Ar 11.0 22.0 13.0 25.0 15.0 27.0

AI 1.2 Ar 10.0 18.0 13.0 23.0 15.0 26.0

Welding table (set value)

MMA (electrode) parameters

When the MMA welding program is chosen, the operator is

allowed access to the following parameters only

Short circuitSet welding

current (A)

Pr.G / F31 Pre-gas (0.2 sec.)

S.St / F32 Soft start (1.0 m/min.)

bb.t / F37 Burn-Back (5 (0-30))

Po.G / F38 Post-gas (3.0 sec.)

SP.t / F39 Spot time (0.0 sec.)

m/min

GS.F / F22 (gas ﬂow) 0,5-27 l/min (only machines with IGC) (optional equipment)

HS.A / F11 Hotstart (25%)

HS.t / F12 Hotstart time (0,5 sek.)

Arc / F13 Arc force (25%)

1 Welding current, [A]

2 Wire feed speed, [m/min]

3 Welding voltage, [V]

4 Arc adjust

5 Lock symbol

Lock: Insert the SD lock card and choose ”1”,

“2” or “All” using (11).

Unlock: Reinsert the SD lock card to unlock

the control panel. For detail information,

see instruction manual.

6 Warning – Overheating

13 MMA welding

Press the key to choose MMA welding.

Long press recalls factory settings if indicator

is on.

14 MIG/MAG welding

Press the key to choose MIG/MAG welding.

Long press recalls factory settings if indicator

is on.

Program is optimised with regard to mix-gas

15 Wire inching

Press the key to feed the wire and adjust

the wire feed speed by turning (10)

simultaneously.

BASIC III

61111425

14 13 12

7 Fault indicator

See instruction manual

8Display of wire feed speed or

welding current

9 Display of welding voltage or

Arc adjust

10 Setting wire feed speed or

welding current

Turn the control knob to set the desired

wire feed speed (MIG/MAG) (see table 1) or

welding current (MMA).

11 Setting welding voltage,

Arc adjust and welding process

Turn the control knob to set the desired

welding voltage or Arc adjust (see table 1).

Short press (11A) (MIG/MAG): Change

between display of welding voltage and Arc

adjust.

Long press (11A): Opens for setting the

welding process (see ﬁgure 1).

12 Selecting trigger mode

Change between 2-stroke (indicator off) and

4-stroke (indicator on).

2-stroke: The welding process starts when

the torch trigger is activated and ends when

the torch trigger is released.

4-stroke: The welding process starts when

the torch trigger is activated and released

and ends when the torch trigger is activated

again.

Long press: Opens user menu. For detail

information, see instruction manual.

11A

QUICKGUIDE OMEGA³ YARD BASIC

Otros manuales de Sistema de soldadura de Migatronic

Migatronic

Migatronic AUTOMIG PULSE Series Manual de usuario

Migatronic

Migatronic RALLY MIG 161i Manual de usuario

Migatronic

Migatronic CMI 183i Manual de usuario

Migatronic

Migatronic PI PLASMA Manual de usuario

Migatronic

Migatronic MIG 385x S Manual de usuario

Migatronic

Migatronic RALLY MIG 161i Manual de usuario

Migatronic

Migatronic OMEGA YARD PULSE Manual de usuario

Migatronic

Migatronic MIGMAN 385 Manual de usuario

Migatronic

Migatronic SIGMA2 300 COMPACT/S Manual de usuario

Migatronic

Migatronic MIG 385 MK III Manual de usuario

Migatronic

Migatronic MTE DIALOG Manual de usuario

Migatronic

Migatronic PILOT 1800 Manual de usuario

Migatronic

Migatronic AUTOMIG Manual de usuario

Migatronic

Migatronic AUTOMIG2 183i Manual de usuario

Migatronic

Migatronic RALLY MIG 161i Manual de usuario

Migatronic

Migatronic DELTA 140 E Manual de usuario

Migatronic

Migatronic PILOT 1800 Manual de usuario

Migatronic

Migatronic PI 350 PLASMA Manual de usuario

Migatronic

Migatronic OMEGA 220 Manual de usuario

Migatronic

Migatronic AUTOMIG PULSE Manual de usuario

Migatronic

Migatronic MULTIMOTIVE Duo Manual de usuario

Migatronic

Migatronic MWF 11x Manual de usuario

Migatronic

Migatronic OMEGA2 CoWelder 300 Manual de usuario

Migatronic

Migatronic PILOT 161 AC/DC Manual de usuario

Manuales populares de Sistema de soldadura de otras marcas

Berner

Berner PLASMACUT 54 Manual de usuario

Pro Spot

Pro Spot PR-155 Manual de usuario

Forney

Forney 210 Manual de usuario

Thermal Arc

Thermal Arc 400S Manual de usuario

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manual de usuario

GYS

GYS PROTIG 201 AC/DC Manual de usuario

TAFA

TAFA 30*8B35 Manual de usuario

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manual de usuario

ESAB

ESAB Buddy Arc 145 Manual de usuario

CIGWELD

CIGWELD 636804 Guía rápida

Red-D-Arc

Red-D-Arc DC-400 Manual de usuario

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manual de usuario

Elettro

Elettro HI-MIG 3000 SYNERGIC Manual de usuario

WIA

WIA Weldmatic 270 CP132-2 Manual de usuario

Sonics

Sonics H520T Manual de usuario

Miller

Miller Big Blue 400D Manual de usuario

NewArc

NewArc RT2000 Guía de inicio rápido

Hypertherm

Hypertherm powermax1000 Manual de usuario