Miele PW 6065 Vario Manual de usuario

Commissioning the machine,

Programme chart, Settings

PW 6065 Vario

To avoid the risk of accidents or

damage to the machine, it is

essential to read these instructions

before it is installed and commissioned. M.-Nr. 09 448 740

en - AU, NZ

Commissioning the machine ........................................4

Programme chart .................................................11

Basic programmes ................................................11

Household .......................................................15

Sport ...........................................................16

Hotel............................................................17

Disinfection ......................................................19

Hygiene .........................................................20

Sluice high* ......................................................20

Bakers/Butchers ..................................................21

Beauty salons/Health spas ..........................................22

Professional cleaners...............................................23

Special programmes ...............................................24

Relay control for external dispensing system .........................25

Consumption data ................................................28

Consumption data for AS/NZS 2040.1:2005 Standard .....................28

Note for test institutes: ...........................................28

Changing default settings..........................................29

Settings menu J..................................................30

To open the Settings menu ..........................................30

Settings/Supervisor level menu .....................................31

To open the Settings/Supervisor level menu .............................31

Language J......................................................33

Sort languages....................................................33

Suds cooling .....................................................33

Time of day ......................................................34

Supervisor level ..................................................34

Display contrast/Display brightness ...................................34

Standby .........................................................35

Memory .........................................................35

Temperature unit ..................................................35

Special programmes ...............................................36

To create a special programme ....................................36

Favourites .......................................................39

Logo............................................................39

Contents

Language menu...................................................39

Intensive water plus ................................................40

Water plus .......................................................40

Save ............................................................40

Auto load control ..................................................40

Pre-wash water ...................................................40

Main wash water ..................................................41

Rinse water ......................................................41

Low water pressure ................................................41

Empty sensor .....................................................41

Water level Cottons ................................................42

Water level Min. iron ...............................................42

PW temp. Cottons .................................................42

PW duration Cottons ...............................................43

Wash time Cottons.................................................43

Wash time Min. iron ................................................43

No. of programmes ................................................43

Target groups ....................................................43

Pre-wash ........................................................44

No. rinses Cottons .................................................44

No. rinses Min. iron ................................................44

No. rinses Disinfection ..............................................44

Pre-rinse Cottons ..................................................44

Pre-rinse Min. iron .................................................44

Anti-crease.......................................................44

Spin free of charge ................................................45

Coin mechanism lock ..............................................45

Demo programme .................................................45

No deterg. .......................................................45

Temp. reduction...................................................45

Controls .........................................................46

Delay start .......................................................46

Settings which can only be changed during the commissioning process ......47

Payment system ................................................47

Supervisor level code ............................................47

Contents

Before using for the first time

,Before commissioning the machine, ensure that it is

correctly installed and connected. Please follow the

operating and installation instructions.

,Commissioning must be completed to determine the

settings for daily operation.

Certain settings can only be altered during the

commissioning process. After that, these can only be

changed by a Miele service technician.

Setting the language J

Settings

Language F#eština

dansk

deutsch

english H

^Turn the multi-function selector to highlight the language of

your choice.

^Press the multi-function selector to confirm your choice of

language.

Use this language?

Back A

^Turn the multi-function selector to select OK, and confirm

by pressing the multi-function selector.

If you wish to select a different language:

^Select and confirm back.

Commissioning the machine

To set the time of day

The time may already have been set at the factory. If it has,

and is correct, you can skip this section. It is possible to alter

the time at any stage via the Settings menu.

Settings

Time of day

24 h clock...

12 h clock...

Time not displayed

^Confirm either 24 h or 12 h. If you confirm Time not

displayed, the following step will be skipped.

9:00

Set the time of day

^Turn the multi-function selector to select the hour and press

it to confirm your selection.

^Then set the minutes.

^Pressing the multi-function selector again saves the time of

day in memory.

Commissioning the machine

Determining target groups

By selecting target groups, you are determining the

programme range of the washer-extractor. You can see

which programmes are assigned to each target group

under "Programme chart" later in this booklet.

Settings

Target groups

§Beauty salons/Health spas V

~Professional cleaners

~Special programmes

Confirm selection

^Use the multi-function selector to select and confirm none,

one or several of the target groups, as required.

The 16 pre-set basic programmes are always displayed

and cannot be deselected.

– A target group selected will be indicated with a tick: 9.

– Mark the target group programmes that you have selected

with a cross in the box 8.

8Household

8Sport

8Hotel

8Disinfection

8Hygiene

8Sluice high*

8Bakers/Butchers

8Beauty salons/Health spas

8Professional cleaners

8Special programmes

Once you have made your selection, select Confirm selection

and press the multi-function selector to confirm your choice.

*only available on machines with a dump valve.

Commissioning the machine

Each of these settings must now be

confirmed (and altered if required).

More details about the settings are

given under "Settings menu".

Place a cross in the box 8to

indicate your selection, or fill in the

gaps _____ as required.

Pre-wash water*

This setting establishes the temperature

of the water for the pre-wash.

^Select:

8Cold

The washer-extractor is only

connected to a cold water supply. Or

8Hot

The washer-extractor is connected to

hot and cold water supplies.

Main wash water*

This setting establishes the temperature

of the water for the main wash.

^Select:

8Cold

The washer-extractor is only

connected to a cold water supply. Or

8Hot

The washer-extractor is connected to

hot and cold water supplies.

*Cold must be selected for tests in

accordance with AS/NZS 2040.1:2005

Standard.

See "Installation and connection -

Plumbing".

Set contrast

The contrast for the display can be set

in 10 steps.

^Select the contrast for the display.

Step _____ (1 to 10)

Set brightness

The brightness for the display can be

set in 10 steps.

^Select the brightness for the display.

Step _____ (1 to 10)

Payment system

Setting for coin-operated machines.

^Select the option you require.

8No coin box

The Lock setting for operating the

machine with a coin box is skipped.

8Programme operation

The machine is operated using a

coin box.

8Timed operation

The machine is coin operated using

a time meter.

Commissioning the machine

8IK6

Serial interface RS 232 for Interface

card 6 is active in coin operation

mode (an IK6 module must be fitted).

8RS 232

Serial interface RS 232 is active

when the machine is operated with

coins (an RS 232 module must be

fitted).

Coin mechanism lock

The Lock setting determines when the

door is locked after the start of the

programme, when operated with a coin

box.

^Select the option you want.

8Immediately

The machine locks straight away.

8in 3 minutes

The machine will lock after a period

of 3 minutes (default setting)

8As soon as cancelled

The machine locks straight away.

Cancel will appear in the display if

the start button is held in for 4

seconds. You can then cancel the

programme in the next 3 minutes.

83 min. after cancelling

The machine will lock after a period

of 3 minutes. Cancel will appear in

the display if the start button is held

in for 4 seconds. You can then

cancel the programme in the next 3

minutes.

Supervisor level code

The Settings/Supervisor level menu can

be locked with a code to prevent it

being accessed by unauthorised

personnel (the Language Jsetting can

still be altered).

^Select the option you want.

8Code not required

Only some of the settings can be

changed (temporary Language

setting, Suds cooling, Time of day,

Display contrast, Display brightness,

Standby, Memory and Temperature

unit).

These settings can be changed by

any user.

Other settings can only be changed

by a Miele Service Technician.

8Code required

A code (000) must be entered in

order to change the settings. All

settings (see Settings menu) can be

changed.

Select this option if you want users to

only be able to change settings via a

code.

The Language setting can be

changed temporarily by any user.

Commissioning the machine

Transit bars

A message will appear in the display to remind you to remove

the transport bars.

^Remove them (if this has not already been done by your

fitter). Then press the multi-function selector to confirm that

this has been done.

To repeat the commissioning process

If you are not certain that all of the settings are correct, you

will need to repeat the commissioning process.

Set up successful

Back A

^Select Back and confirm your selection.

The commissioning process must then be repeated.

To finish the commissioning process

–1. Confirm

If you are sure that all of the settings are correct.

Set up successful

Back A

^Confirm with OK.

The entry menu will appear.

Commissioning the machine

1 Cottons Uni. 60°C Programme selection...

2 Minimum iron 40°C Settings F...

3 Delicates 40°C

4 Woollens H30°C 15:00

To finish the commissioning process completely, a first wash

programme must be started.

If the power to the machine is switched off before the first

wash programme is started (e.g. by pressing the K

button), the commissioning process can be carried out

again. The commissioning process does not need to be

carried out again once a wash programme that is longer

than 20 minutes has been run.

–2. Start the first wash programme

For safety reasons, spinning is not possible until the first

wash programme has been run. To activate the spinning

function and to complete the commissioning process, you

must run a wash programme without laundry and without

detergent.

^Open the taps.

^Select Cottons 60°C and confirm your selection.

The main menu for Cottons Universal will then appear.

^Press the flashing Start button.

After this programme has finished, the washer-extractor is

ready for processing laundry.

Commissioning the machine

Otros manuales para PW 6065 Vario

Tabla de contenidos

Otros manuales de Arandela de Miele

Miele

Miele PW 6321 Manual de usuario

Miele

Miele W 3240 Manual de usuario

Miele

Miele W 1945 Manual de usuario

Miele

Miele W 1918A WASHING MACHINE Manual de usuario

Miele

Miele PW 6207D Manual de usuario

Miele

Miele WCE 330 PWash 2.0 Manual de usuario

Miele

Miele Distinction 500 Manual de usuario

Miele

Miele W 1119I WASHING MACHINE Manual de usuario

Miele

Miele WDD320 SpeedCare 1400 Manual de usuario

Miele

Miele W 4802 Manual

Miele

Miele G 7883 Manual de usuario

Miele

Miele WWG120 XL Manual de usuario

Miele

Miele PW 6241 Manual de usuario

Miele

Miele WKR571WPS Manual de usuario

Miele

Miele W 4840 Manual de usuario

Miele

Miele W 435-E WPS Manual de usuario

Miele

Miele NOVOTRONIC W 1918 Manual de usuario

Miele

Miele W 149 Manual de usuario

Miele

Miele W 1916 Manual de usuario

Miele

Miele NOVOTRONIC W 1903 Manual de usuario

Miele

Miele WEK 365 Manual de usuario

Miele

Miele PW 6065 OS Manual de usuario

Miele

Miele G 7893 Manual de usuario

Miele

Miele PG 8592 Manual de usuario

Manuales populares de Arandela de otras marcas

Tricity Bendix

Tricity Bendix AW 1000 W Guía del producto

Panasonic

Panasonic NA-F60L5WRB Manual de usuario

GE WSLP1500 Manual

Electrolux

Electrolux EWF1284EDW Manual de usuario

Bosch

Bosch WAN2829BSN Manual de usuario

LG TV2516DV3B Manual de usuario

LG TH2517DSAV Manual de usuario

VESTEL

VESTEL CMH-XL 7510 TE Manual de usuario

AEG

AEG 74335 Manual de operación

Johnson

Johnson JWF721A Manual de usuario

Beko

Beko WTE7604XLW0 Manual de usuario

Danby

Danby DTT100A1WDB Instrucciones de montaje

Amica

Amica WA 14 Ex Manual de usuario

Daewoo

Daewoo DWD-F1222 Manual de usuario

Bosch

Bosch WAS28461AU Manual de usuario

Finlux

Finlux FLX108CF220 Manual de usuario

Whirlpool

Whirlpool 3LBR5132AN0 Manual de usuario

Beko

Beko WKB 51231 PTMA Manual de usuario