Miele DGC 5080 Manual de usuario
Installation instructions
Steam combi oven
DGC 5080
To avoid the risk of accidents or
damage to the appliance it is
essential to read these
instructions before it is installed
and used for the first time. M.-Nr. 07 223 420
en-GB
Safety instructions for installation....................................3
Appliance and building-in dimensions ................................4
Installation in a tall unit...............................................4
Installation in a base unit .............................................6
Installation in a tall unit in combination with an oven........................8
Installing the appliance ............................................10
Electrical connection..............................................11
Connection cable..................................................12
Energy efficiency class ............................................13
Contents
2
The appliance must be installed by
a suitably qualified and competent
person in strict accordance with
current national and local safety
regulations.
~Before installation, check the
appliance for visible signs of damage.
~Before connecting the appliance,
make sure that the connection data on
the data plate (voltage and connected
load) match the mains electricity
supply. Consult a qualified electrician if
in any doubt.
~The electrical safety of this
appliance can only be guaranteed
when continuity is complete between it
and an effective earthing system which
complies with current local and national
safety regulations. It is most important
that this basic safety requirement is
present and regularly tested, and
where there is any doubt, the
household wiring system should be
inspected by a qualified electrician.
The manufacturer cannot be held liable
for the consequences of an inadequate
earthing system (e.g. electric shock).
~This appliance may only be used in
mobile installations if a risk assessment
of the installation has been carried out
by a suitably qualified engineer.
~The appliance must be positioned
so that you can see the contents of a
cooking container placed on the top
runner. Otherwise you may risk
scalding or burning yourself with hot
water and food when taking containers
out of the oven.
Keep these instructions in a safe place
and pass them on to any future user.
All dimensions in this instruction booklet
are given in mm.
Safety instructions for installation
3
Installation in a tall unit
aSteam combi oven
bBuilding-in recess
cInlet for mains connection cable to the appliance
dRecommended position for electrical connection.
Important: Do not position behind the appliance!
eMains connection cable
* Appliances with glass front
** Appliances with metal front
Appliance and building-in dimensions
4
Cut-out for venting the steam combi oven
To ensure that the steam combi oven has adequate ventilation, a cut-out of 500 x
30 mm must be provided in the interim shelf above the appliance in the building-in
niche aand also in the top of the tall unit b. No back panel may be present
either behind the building-in niche or behind the area above the interim shelf in
the tall unit.
Appliance and building-in dimensions
5
Installation in a base unit
aSteam combi oven
bBuilding-in recess
cInlet for mains connection cable to the appliance
dRecommended position for electrical connection.
Important: Do not position behind the appliance!
eMains connection cable
* Appliances with glass front
** Appliances with metal front
Appliance and building-in dimensions
6
Cut-out for venting the steam combi oven
To ensure that the steam combi oven has adequate ventilation, a cut-out of 500 x
30 mm must be provided in the base of the building-in niche aand also in the
base of the area underneath it b. No back panel may be present either behind
the building-in niche or behind the area underneath it.
Appliance and building-in dimensions
7
Installation in a tall unit in combination with an oven
aSteam combi oven
bBuilding-in recess
cInlet for mains connection cable to the appliance
dRecommended position for electrical connection.
Important: Do not position behind the appliance!
eMains connection cable
fOven
* Appliances with glass front
** Appliances with metal front
Appliance and building-in dimensions
8
Cut-out for venting the steam combi oven
To ensure that the steam combi oven has adequate ventilation, a cut-out of
500 x 30 mm must be provided in the interim shelf above the appliance in the
building-in niche aand also in the top of the tall unit b. No back panel may be
present either behind the building-in niche or behind the area above the interim
shelf in the tall unit.
Cut-out for venting the oven:
Please refer to the installation instructions for the oven.
Appliance and building-in dimensions
9
^Push the appliance into the recess and align it.
^Secure the appliance by screwing the two wood screws
3.5x25mmi(supplied) into the vertical trim on either
side of the appliance (see illustration).
Installing the appliance
10
Otros manuales para DGC 5080
2
Tabla de contenidos
Otros manuales de Horno de Miele
Miele
Miele H350 Manual
Miele
Miele DGC 6705 XL Manual de usuario
Miele
Miele H 7780 BP2 Manual de usuario
Miele
Miele 11 197 290 / 00 Manual de usuario
Miele
Miele MasterChef H 394 B Manual de usuario
Miele
Miele H 4744 BP Manual de usuario
Miele
Miele H 4170 Manual de usuario
Miele
Miele H4842BP Manual de lista de piezas
Miele
Miele H 4894 BP2 Operating and Manual de lista de piezas
Miele
Miele H 4884 BP Instrucciones de uso
Miele
Miele DG6600CS Manual de usuario
Miele
Miele H 2465 BP Manual de usuario
Miele
Miele DGC 7840 Manual de usuario
Miele
Miele H6860BP Manual de usuario
Miele
Miele H 4540 Pyrolytic Manual de usuario
Miele
Miele DGC 6300 Manual de usuario
Miele
Miele H 5681 BP Manual de usuario
Miele
Miele H6560B Manual de usuario
Miele
Miele CS 1028 Manual de usuario
Miele
Miele H4881BP Manual de usuario
