Midwest Crophawk Draper Platform Manual de usuario

CropHawk Draper Platform Operators Manual 1

OPERATOR’S MANUAL

From Serial Number

MWF-11040656

MIDWEST CROPHAWK

DRAPER PLATFORM

2012 Edition A

MidWest Fabrication Pty Ltd 6 Irvingdale Road, Dalby Qld Australia 4405

P: 07 46622137 F: 07 46622138 serv[email protected]

2CropHawk Draper Platform Operators Manual

Warranty

IMPORTANT

Has your dealer registered your new

platform for warranty ?

To activate warranty the following 4 documents from the pre-

delivery manual have been completed and returned to Mid-

West Fabrication.

 Purchase Information (Fax/Email/Online)

 Freight Delivery Report (Fax/Email/Online)

 Pre-Delivery Report (Fax/Email/Online)

 Customer Installation Form (Online Only)

Serial number: Signed:………………………………..

MWF-…………………... Dealership Representative

Platforms not registered for warranty may be ineligible for

warranty and manufacturer product improvement programs.

CropHawk Draper Platform Operators Manual 3

Warranty

Warranty is provided as part of Midwest's support program for customers who operate and maintain their Draper

Platform as described in this manual. All warranty work shall be carried out at point of sale or at the servicing dealer

premises.

NOTE: Where damage has been caused by collision or objects other than crop coming into contact with the

platform, warranty for that damage shall be void.

Draper Platforms are guaranteed against manufacturing faults for a period of 12 months from dealer installation

date.

Conditions of Warranty

IMPORTANT: To activate warranty the following 4 documents (contained in the pre-delivery manual or the

dealer secure zone 0n the MidWest website. www.midwestfabrication.net.au) MUST be filled out and

returned to MidWest Fabrication either by email (service@midwest.net.au) or fax (07 46622138)

1. Purchase Information

2. Freight Delivery Report

3. Pre-Delivery Report

4. Customer Installation Form

Tyres: Are not covered by MidWest Fabrication Pty Ltd but by the tyre manufacturer’s warranty.

Feed Drum: Feed drum guides and fingers are crop engagement parts , and therefore not subject to

manufacturer’s warranty.

Drive Belts: All belts are adjusted in the factory, checked and adjusted on pre-delivery. If the belt is proven

faulty, a claim will be considered. If the claim involves belt slippage or miss-alignment, claim

will be rejected.

Reel: Pick-up reel fingers and bats are crop engagement parts and therefore not subject to

manufacturer’s warranty. Reel bush wear is governed by crop conditions and speed therefore

subject to pro-rata consideration only. Such pro-rata assessment shall be carried out by a

representative of MidWest Fabrication Pty Ltd. Bent pick-up finger tubes or bats are not sub-

ject to warranty.

Knife: Knife guards and sickles are crop engagement parts and are therefore not subject to

manufacturer’s warranty. Bent or broken crop dividers or nose cones, are not subject to

warranty.

Paint: Paint scratches, normal wear and tear are not covered by warranty. If there is a problem with

the paint quality contact your dealer.

IMPORTANT: Should the Draper Platform be misused or modified beyond the original factory specifica-

tions, warranty and product improvement programs will be denied.

Disclaimer: All information, illustrations and specifications in this manual are based on the latest information

available at the time of publication, the right is reserved to make changes at any time without notice.

4CropHawk Draper Platform Operators Manual

Serial Number Information

Modification /Upgrade Record

PURCHASE INFORMATION

Dealers Name

Address

Phone

Purchase Date

Model

Serial Number

Delivery Date

Date Modification / Upgrade

CropHawk Draper Platform Operators Manual 5

Introduction

Read this manual very carefully to learn how to operate, maintain and service your Midwest Draper Platform cor-

rectly. Failure to do so could result in personal injury, equipment damage or void warranty.

NOTE: This manual does not provide all the information required to operate the combine harvester. The

Midwest Operators Manual must be used in conjunction with your Combine Harvester Operators Manual.

Carefully read all manuals to become familiar with recommended procedures before attempting to unload, assemble

or operate the Midwest Crophawk Draper Platform.

Record of Model and Serial numbers should be kept in a secure place off the platform. These numbers may be

required should the platform be stolen or when ordering parts through your MidWest dealer.

This Operators Manual should be considered a permanent part of the MidWest Draper Platform and should

remain with the platform when you sell it.

Note: Terminology used throughout this manual

Front - The knife side of the platform

Rear/Back - Combine side of the platform

Right (RH) - As seen facing direction of forward travel

Left (LH) - As seen facing direction of forward travel

6CropHawk Draper Platform Operators Manual

Contents

Warranty ---------------------------------------------------------------------------------------------------------- 2

Serial Number Information --------------------------------------------------------------------------------- 4

Introduction ------------------------------------------------------------------------------------------------------- 5

Safety --------------------------------------------------------------------------------------------------------------- 7

General Platform Information ------------------------------------------------------------------------------ 12

Warranty ---------------------------------------------------------------------------------------------------------- 16

Platform Operations ------------------------------------------------------------------------------------------ 28

Platform Set-up ------------------------------------------------------------------------------------------------ 20

 AGCO initial Platform setup------------------------20

 CNH initial Platform setup--------------------------22

 Claas initial Platform setup-------------------------24

 John Deere initial Platform setup-----------------26

Removable Components ------------------------------------------------------------------------------------ 30

Reel ---------------------------------------------------------------------------------------------------------------- 35

Feed Drum ------------------------------------------------------------------------------------------------------- 41

Drive System ---------------------------------------------------------------------------------------------------- 45

Knife / Cutterbar ------------------------------------------------------------------------------------------------ 54

Adaptor ------------------------------------------------------------------------------------------------------------- 56

Draper Belts ----------------------------------------------------------------------------------------------------- 59

Hydraulic/Electric system ----------------------------------------------------------------------------------- 65

Harvesting Tips ------------------------------------------------------------------------------------------------- 68

Connecting and Disconnecting the Draper ------------------------------------------------------------- 69

Storage Procedures ------------------------------------------------------------------------------------------- 71

Lubrication / General Maintenance ----------------------------------------------------------------------- 73

Unloading the Platform --------------------------------------------------------------------------------------- 78

Platform Restraint Guidelines ------------------------------------------------------------------------------ 81

Trouble Shooting ----------------------------------------------------------------------------------------------- 82

Options and Attachments ----------------------------------------------------------------------------------- 88

Specialty Tools -------------------------------------------------------------------------------------------------- 90

Index ---------------------------------------------------------------------------------------------------------------- 93

CropHawk Draper Platform Operators Manual 7

Continued on next page

Safety

Be alert to the potential for personal injury. Follow all recommended precautions and safe operating practices.

Ensure all safety messages in this manual are read and understood. Keep all safety signs in good condition and

replace damaged safety signs immediately. To install safety decals insure area is clean and dry. Remove the back-

ing paper and place in position.

Keep draper platform in proper working condition. Miss-use or modifications to the draper platform may impair the

function and/or safety and affect the life of the platform.

Learn how to operate the draper platform and how to use it properly. Under no condition should anyone operate the

draper without proper instruction. If you do not understand any part of this manual contact your Dealer.

Safety Decals

Throughout this manual and on draper decals you will find precautionary statement followed by specific instructions.

These precaution are intended for you personal safety and those working with you. Failure to follow “Important”, and

“Danger” instructions may result in serious injury or death.

The following safety decals have been placed on the MidWest Draper Platform in the areas indicated for your safe-

ty and to prevent potential machine damage if certain procedures are not followed.

Review the warning decals and the operating instructions detailed in this manual with machine operators.

8CropHawk Draper Platform Operators Manual

Continued on next page

Safety

CropHawk Draper Platform Operators Manual 9

Continued on next page

Safety

Personal Safety

Personal Protective Equipment.

When assembling, operating and servicing the draper platform

ensure adequate close fitting protective clothing and equipment are

used.

Prepare for Emergencies.

Keep a first aid kit readily assessable in case of injury.

Be prepared for a fire. Keep a fire extinguisher on/or near the

draper platform at all times. Ensure it is properly maintained and

the operator is familiar with its correct use.

Always remove the combine ignition key and engage park

brake.

Wait until all movement has stopped before making any

adjustments or servicing on the platform.

Never leave combine unattended while engine is running.

Be sure to remove ignition key and lock the operators cab.

Stay Clear of Draper Platform.

Platform knife, PTO shafts, draper belts, reel and drives cannot

be completely shielded due to their function. Stay clear of these

moving components during operation. Always disengage combine

separator clutch, shut off engine, set park brake and remove key

before making any adjustments or servicing.

Drive Belts.

Avoid serious injury from entanglement by shutting off engine,

remove the combine ignition key and engage park brake. Wait

until all movement has stopped before making any adjustments or

servicing the draper platform.

Do not attempt to clean drive belts with flammable cleaning

solvents.

10 CropHawk Draper Platform Operators Manu-

Continued on next page

Safety

Caution: Hydraulic systems operate at high temperatures and at

high pressure. Escaping fluid under pressure can penetrate the

skin causing serious injury. Avoid hazard by relieving pressure be-

fore disconnecting hydraulic lines. Tighten all connections before

applying pressure. If oil is hot allow adequate cooling period be-

fore adjusting or servicing hydraulic components on the platform.

Search for leaks with a piece of cardboard, NEVER USE YOUR

HAND. Protect hands and body from high pressure fluids with suit-

able protective clothing.

If an accident occurs, seek medical attention immediately. Any oil injected at high pressure into the skin

must be surgically removed within a few hours. Doctors unfamiliar with this type of injury should refer to a

knowledgeable medical source.

Hydraulic System.

Caution: Hydraulic oil is a flammable liquid.

Never attempt to gas heat or weld any hydraulic components,

lines or oil reservoirs. To do so may cause an explosion, causing

serious injury or death. Repairs of this nature should be carried

out by a qualified tradesperson only.

Remove Crop Debris.

Remove crop debris from moving parts as this is a fire hazard. Check and clean these

areas frequently. Always disengage separator combine clutch, shut off engine, set

park brake and remove key before removing crop debris from Draper platform.

Rotating Parts.

Avoid contact with rotating parts as contact may cause death.

Do not operate drive shaft without shields in place.

Ensure drive shaft is securely attached at both ends

Avoid Toxic Fumes and Dust.

Remove paint before welding or heating. Hazardous fumes can be

generated when paint is heated by welding, soldering or using a torch.

Always do work in an area that is well ventilated to carry dust or fumes

away.

Wear an approved respirator while using solvent or paint stripper, grinding

or welding.

Tabla de contenidos

Otros manuales de Maquinaria agrícola de Midwest

Midwest

Midwest Avian Adventures Grande Manual de usuario

Midwest

Midwest Mid-Tech TASC 6200 Manual de usuario

Midwest

Midwest Mid-Tech Legacy 2000 Manual de usuario

Midwest

Midwest Made Easy 101 Manual de usuario

Manuales populares de Maquinaria agrícola de otras marcas

GSi

GSi PNEG-2314 Manual de usuario

Checchi & Magli

Checchi & Magli TEXDRIVE Manual de usuario

Amazone

Amazone Cenius 4003-2TX Manual de usuario

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manual de usuario

Cima

Cima BLITZ Instrucciones de funcionamiento y mantenimiento

Amazone

Amazone CombiDisc 3000 Instrucciones de instalación

HE-VA

HE-VA Disc-Roller XL Contour Manual de usuario

AGT

AGT AGT-SSFM Manual de usuario

Milestone

Milestone 72-84 Manual de usuario

KUHN

KUHN Hector 3000 Manual de usuario

Krone

Krone X-Disc 6200 Manual de usuario

Eliet

Eliet DZC450 Manual de usuario

Taarup

Taarup BIO+ B4000 Manual de usuario

Garland

Garland SHAKER 310 DPG Manual de usuario

stable comfort

stable comfort StableWall System Manual de usuario

Raven

Raven AccuBoom Manual de usuario

International

International 710 Manual de usuario

Ashland

Ashland HDW-3217-14 Manual de usuario