Midea MBF2733PC Manual de usuario
BLADELESS
PURIFIER
www.midea.com.mx
MODEL:
MBF2733PC
USER MANUAL
Warning: Please read this manual carefully
before using the appliance and keep it for
future reference.
For product improvement, design and
specifications are subject to change without
notice.
Consult your dealer or manufacturer for
details.
IMPORTER: MIDEA MÉXICO S. DE R.L. DE C.V.
AV. EUGENIO GARZA SADA 3820
COL. MAS PALOMAS
MONTERREY, N.L.
C.P. 64780 MÉXICO
We have included some important safety messages in this manual and on
your appliance. Always read and obey all safety messages.
This is the safety warning symbol. This symbol calls
attention to death to potential hazards that may or may
only cause injury to you and others.
All safety messages will follow the safety warning
symbol and the word "DANGER" or "WARNING".
These words mean:
If you don't follow instructions right away, you could be
killed or seriously injured.
If you don't follow instructions, you could be killed or
seriously injured.
All safety messages will tell you about the potential danger, how to reduce
the chances of injury, and what can happen if instructions are not followed.
CONTENT
READ THIS MANUAL
Thank you very much for choosing our products. Please read the instructions
before using the product. This manual contains important information about the
operation, care and service of the product. Keep it in a safe place for future
reference. If the product is sold or transferred to another person, or you move
and leave the appliance, always be sure to leave the instruction manual with the
appliance so that the new owner is familiar with the appliance's operation and
the relevant warnings.
2
CONTENT
Important Safety instructions...........................................................................................3
Rules for safety operation................................................................................................5
Product introduction.........................................................................................................5
Installation instructions.....................................................................................................6
Operation...........................................................................................................................8
Filter replacement...........................................................................................................10
User servicing instructions.............................................................................................12
Cleaning..........................................................................................................................12
DANGER
WARNING
IMPORTANT SAFETY INSTRUCTIONS
3
DANGER
1. This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended
to fit in a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety feature.
2.
WARNING—
To reduce the risk of fire or electric shock, do not
use this fan with any solid-state speed control device.
3. This product employs overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation. If the fuse blows,
unplug the product from the outlet. Replace the fuse as per the
user servicing instructions (follow product marking for proper
fuse rating) and check the product. If the replacement fuse
blows, a short-circuit may be present and the product should be
discarded or returned to an authorized service facility for exami-
nation and/or repair.
a) “Do not operate any fan with a damaged cord or plug. Discard
fan or return to an authorized service facility for examination
and/or repair.”
b) “Do not run cord under carpeting. Do not cover cord with
throw rugs, runners, or similar coverings. Do not route cord
under furniture or appliances. Arrange cord away from traffic
area and where it will not be tripped over.”
4. Do not leave the fan running unattended.
5. Keep electrical appliances out of reach from children or infirm
persons. Do not let them use the appliances without supervision.
6. If the supply cord is damaged, it must be replaced by
manufacturer or its service agent or a similarly qualified person
in order to avoid a hazard.
Read Rules for Safe Operation and Instructions Carefully.
WARNING
7. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play
with the appliance.
8. When the fan was assembled, the rotor blade guard shall not
be taken off anymore.
- Prior cleaning unplug the fan.
- The rotor guard shall not be dissembled/opened to clean the
rotor blades.
- Wipe the fan enclosure and rotor blade guard with a slightly
damp cloth.
IMPORTANT SAFETY INSTRUCTIONS
4
WARNING
1. Never insert fingers, pencils, or any other object through the
grille when fan is running.
2. Disconnect fan when moving from one location to another.
3. Be sure fan is on a stable surface when operating to avoid
overturning.
4. DO NOT use fan in window, rain may create electrical hazard.
5. Household use only.
RULES FOR SAFETY OPERATION
PRODUCT INTRODUCTION
1
2
3
4
5
6
78 89 910 10
NO. Description NO. Description
1 Operation panel
2Display panel
3Air outlet
4
5
7
Ambient light of belt
8
Base
Power cord plug
Air inlet grille
9 Pre-filter
10 HEPA filter
6Power line
5
NOTE: Pictures in the manual are for reference only, and real objects within
the packaging box will prevail in the end.
Parts Name
PRODUCT INTRODUCTION
INSTALLATION INSTRUCTIONS
Parts List
Installation Steps
Remote Controller ×1 Manual × 1 HEPA Filter ×2
Remove the protective
film of the filter.
3
Take out the pre-filter
Press the raised part on both
sides to pull it outwards, and
take out the pre-filter.
21 Remove the air inlet grille.
Buckle
Install the HEPA filter4
6
7
INSTALLATION INSTRUCTIONS
Installation Steps
It is recommended to clean the filter once every two weeks and replace it once
every six months (the cleaning and replacement cycle can be adjusted according
to the use environment).
Install the pre-filter
5Align the slot position at the
bottom, and buckle up the upper
U-shaped buckle.
Install the air inlet grille
Align the upper two buckles
and press them tightly, then
press the two sides at lower
part, slowly and gently buckle
the air inlet grille.
6
Buckling
position
Plug power supply7
OPERATION
8
Button Function Description
“- +”
Startup/Standby.
Set wind speed/timing.
Multi-angle oscillating switch of 30°,60°, 120° and 0°.
In the startup mode, press this button for cyclic switch between normal wind
(12 gears, indicator light is on) /sleep wind (3 gears, indicator light is
on)/baby wind (2 gears, indicator light is on).
Timed shutdown is achieved in the startup state, and reserved startup is
achieved in the standby state;
After clicking , set the timing time by pressing "+, -" (the display screen
shows 0-1-2- … -12-0h in a cycled manner), and when the timing time is 0h, it
indicates cancellation of timing/reservation.
Start up or shut down the mode of the wind changing with the temperature.
In the mode of wind changing with the temperature, the indicator light is on,
and the wind force can be automatically adjusted according to the change of
environmental temperature.
Short press to turn on/off the net ion sterilization module.
Long press for 3 seconds to reset the filter.
Ambient light function, turn on/off the Ambient light.
9
OPERATION
Additional Features and Maintenance
Remote Control Button Description
Forced shutdown
Intelligent memory
There is no operation during the running of the fan, after 12 hours of contin-
uous operation, the fan will be forced to shut down automatically.
When the fan is turned off or powered off, it will run in the state before
turning off or power off when the power is powered on again (the timing
function is not memorized).
Screen-off function
In case of no operation for 60 seconds during normal operation, the indicator
light on the body will be automatically off, but the fan will continue to oper-
ate. Press the ON/OFF button to turn off the fan when the screen is off, and
press the other button to restore display.
Automatic reset of oscillating function upon shutdown
Upon shutdown, the oscillating function is automatically reset.
Note:
The remote control should be normally used within 5 meters of the front of the product and 30
degrees of the deviation angle.
The battery contains many heavy metals, acids and bases, etc., which may threaten human's
health; Waste batteries should be recycled separately.
Start up or shut down
oscillating and air blowing
Startup/Standby
Switch the wind type
Start up /shut down the mode of
the wind changing with the
temperature
Set the timed shutdown/
reserved startup
Press “+, -” to set the wind
speed or timing time
AAA Battery, 1.5 V
Battery
Use manganese or alkaline batteries of type "AAA".
DO not use rechargeable batteries.
Filter model: FQ150CJ-2
(including 2 sets)
12 When the indicator light for replacement
of filter is on, the prompt that reminds you
of filter replacement will appear. If it is not
replaced in time, the prompt will appear
during each startup.
4 Long press the button for 3 seconds
to turn off the indicator light for filter
replacement.
Replace a new filter
3
10
OPERATION
Remote Control Button Description
Filter Replacement
Tabla de contenidos
Idiomas:
Otros manuales de Purificador de aire de Midea
Midea
Midea KJ250G-Z42 Manual de usuario
Midea
Midea KJ500G-TB32 Manual de usuario
Midea
Midea MSF15AH6LB Manual de usuario
Midea
Midea FP-71APA040WETH-W Manual de usuario
Midea
Midea US-KJ200G-D41 Manual de usuario
Midea
Midea AMS150-PB Manual de usuario
Midea
Midea KJ350G-S1 Manual de usuario
Midea
Midea KJ500G-TA32 Manual de usuario
Midea
Midea AMS150-PBW Manual de usuario
Midea
Midea MP3.360 Manual de usuario
