Microtech Xstreamjet Manual de usuario

Inkjet Printer Manual
Document 003-0109-02 • November 2008

Notices
WARNING
To avoid electrical shock hazard, the unit’s cover should be removed only by authorized personnel.
NOTICE FOR USA
Federal Communications Commissions (FCC) Statement
is equipment has been tested and found to comply with the radiated energy limits for a Class A
digital device, in accordance with FCC CFR 47 Part 15 Rules and Regulations. (1) is device may
not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
is equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. ese limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. is
equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used
in accordance with the instruction manual, it may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his own expense.
Modications not expressly approved by the manufacturer could void the user’s authority to operate
the equipment under FCC rules.
Type of Product: Ink Jet Printer
Product Name: Xstreamjet Printer
Responsible Party: Microtech Systems
NOTICE FOR EUROPE
European Standards
is equipment conforms to the EMC Directive (89/336/EEC) by compliance with the following
European standards:
EN 55022:1998 + A1:2000, CISPR 22:1997 + A1:2000 (Emissions):
EN 50024:1998 + A1:2001, CISPR 24:1997 + A1:2001 (Immunity):
EN 60950:2001 First Edition (Safety)
For Canadian Users
is Class A digital device complies with Canadian ICES-003.
Cet apparéil numerique de la classe A est conforme à la norme NMB-003 du Canada.
- ii -
Microtech Systems
- ii -
© 2008 Microtech System, Inc. All rights reserved.
Xstreamjet Printer Manual.
is manual, as well as the hardware and soware described in it, is furnished under license and may
be used or copied only in accordance with the terms of such license. e content of this manual is
furnished for informational use only, is subject to change without notice, and should not be con-
strued as a commitment by Microtech Systems, Inc. Microtech Systems, Inc. assumes no responsibil-
ity or liability for any errors or inaccuracies that may appear in this book.

- iii -
Trademarks
Xstreamjet Microtech Systems and the Microtech Systems logo are trademarks of Microtech Systems,
Inc. All other products, names and services are trademarks or registered trademarks of their respective
owners.
Microtech Systems, Inc., 2 Davis Drive, Belmont, CA 94002 USA
Part number 003-0109-02 – November 2008

- iv -
Microtech Systems

- v -
Contents
Introducing the Xstreamjet........................................................................................1
About the Xstreamjet ...........................................................................................................................1
About This Guide...................................................................................................................................1
Getting Acquainted.....................................................................................................3
Xstreamjet Components ......................................................................................................................3
Safety Information ................................................................................................................................5
Specications........................................................................................................................................7
Manually Inserting or Retrieving a Disc ...........................................................................................9
Setting Up the Xstreamjet........................................................................................11
Xstreamjet Printer Components .......................................................................................................11
Unpacking the Xstreamjet.................................................................................................................12
Loading Inkjet Cartridges ..................................................................................................................13
Installing the Xstreamjet onto a Host System................................................................................13
Cabling the Xstreamjet.......................................................................................................................17
Installing and Conguring the Xstreamjet Software.....................................................................19
Testing Printer Operations.................................................................................................................21
Calibrating the Xstreamjet.................................................................................................................23
Using Xstreamjet Software .....................................................................................25
Starting the Software.........................................................................................................................25
Using Properties on the Main Tab....................................................................................................25
Maintaining the Xstreamjet.....................................................................................29
Running the Head Cleaning Utility ...................................................................................................30
Inserting/Changing Ink Cartridges...................................................................................................31
Emptying the Waste Ink Tank............................................................................................................31
Packing and Shipping the Printer ....................................................................................................32
Troubleshooting.........................................................................................................35
Detecting Problems............................................................................................................................35
Common Problems and Solutions ....................................................................................................36
Getting Xstreamjet Help...........................................................................................39

Microtech Systems
- vi -

- 1 -
Introducing the Xstreamjet
Introducing the Xstreamjet
Congratulations on your acquisition of the Xstreamjet Printer™ – a new CD/DVD/
Blu-Ray printing system from Microtech Systems for that brings professional print
quality to in-house disc publishing.
About the Xstreamjet
Using state of the art six-cartridge ink technology, the Xstreamjet delivers outstand-
ing photo-quality images directly onto the surface of discs, allowing a combination of
colorful backgrounds, text and gures that meet even the most complex needs.
What’s more, the Xstreamjet has been designed to provide maximum versatility, reli-
ability and high-speed printing. e Xstreamjet can be used with any Microtech disc
publishing system; use it with an autoloader or automated disc duplicator for fast,
unattended publishing of discs at high volume.
Features
Professional, photo-quality inkjet printer for any disc (for example, CD,•
DVD or Blu-Ray discs)
Designed for use with autoloader/automated disc duplicator•
Simple cabling with industry standard connections•
Direct-to-surface color inkjet printing•
Optional Continuous Ink System replaces cartridges•
High speed printing•
Highest quality graphic image output•
5760 x 1400 DPI maximum resolution•
Variable-sized droplet technology with 3pl minimum droplet size•
About This Guide
is document familiarizes you with the Xstreamjet, explains the simple steps re-
quired to unpack, set-up and test your unit before using it in production, and de-
scribes the activities necessary for proper maintenance. Technical support informa-
tion can be found in the Technical Support section.

- 2 -
Microtech Systems

- 3 -
Getting Acquainted
Getting Acquainted
is chapter helps you get acquainted with the Xstreamjet by describing its main com-
ponents. Important safety information is provided, as well as tips for general printer
use. e Xstreamjet’s specications are also included.
Xstreamjet Components
e Xstreamjet is easy to operate and maintain. e gures below depicts its main
external features.
e primary internal features include the print head and the cartridge bin as shown
below.
Status LED / Tray Control
e status LED glows continuously to indicate that the printer has power. Error con-
ditions are indicated by a series of ashing patterns. (See the Troubleshooting chapter
for more information.)
In addition, this button provides a way to manually operate the disc try. Press the but-
ton to extend (open) the tray; press it again to retract (close) the tray. (Note: during
normal operation, the tray is extended and retracted by soware commands.)
Disc Tray Opening
Status LED / Tray Control Waste Ink level Indicator
Vent
Cable Connectors
Power Switch
Figure 1
External Features
Cartridge Bin
Print Head
AC Power Input
Figure 2
Internal Features

- 4 -
Microtech Systems
Disc Tray Opening
A mechanical tray that holds the disc to be printed extends and rejects through the
disc tray opening.
Waste Ink Level Indicator
e Xstreamjet uses two high-capacity waste ink reservoirs to store ink used during
print head nozzle cleaning operations. e reservoirs are serviceable by the end-user
and should be emptied regularly to avoid overlling.
e waste ink level indicator displays the current level of waste ink in the reservoirs.
Vent
A slotted vent in the rear of the unit provides air ow to the device internals. Do not
block the vent by placing the Xstreamjet ush against a vertical surface such as a wall
or partition.
Cable Connectors
Cables that connect the printer to its host are attached to the rear of the printer. Note
that separate jacks are provided for printer control (mini-din style connector) and user
data (USB 2.0 style connector).
Power Switch
A switch that controls power to the printer is found at the rear of the unit.
AC Power Input
e AC power input is a receptacle for a standard grounded 120 AC power cord.
Cartridge Bin
An array of (6) inkjet cartridges supply ink to the Xstreamjet. e cartridges are
stored in a special holder under the front cover.
Print Head
e print head consists of an array of ink nozzles that apply the ink to the media
surface. Periodic cleaning of the nozzles is a standard user maintenance activity and
ensures proper operation over the printer’s full duty cycle.
The Xstreamjet differs from other
printers in that cleaning the print
head generates waste ink that must
be emptied.
Empty the waste ink containers
periodically to ensure proper
operation of your Xstreamjet.
Waste Ink Removal
The Xstreamjet may also be used
with Microtech’s Continuous Ink
System (CIS).
Cartridge Alternative
Tabla de contenidos

















