MicroSYST Migan Manual de usuario

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach

+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de

migan Ethernet IP

Large Format Numeric LED Display with Ethernet IP Interface

User manual

migan Ethernet IP

Large Format Numeric LED Display with Ethernet IP Interface

Page 2

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach

+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de

Index

1GENERAL 3

2TECHNICAL INFORMATION 3

2.1 Device Configuration 4

2.2 Connector Pin Assignments 5

2.3 Device Start 6

2.4 Ethernet IP Configuration 7

3CONTROL DATA 8

3.1 Control Frame (Display Output) 8

3.2 Response Frame (from Display) 11

4APPENDIX 12

4.1 Displayable Characters 12

4.2 Ethernet IP Diagnostics 13

4.3 Factory Settings 15

4.4 General Notes 16

4.5 Declaration of Conformity 17

4.6 Warranty / Liability 18

4.7 Versions Overview 19

migan Ethernet IP

Large Format Numeric LED Display with Ethernet IP Interface

Page 3

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach

+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de

1 General

This 7 segment displays are designed for professional use. Depending on the

type of device, they are suitable for indoor or outdoor use.

The modular design allows for cost-effective models of various inter-

faces with different character heights and numbers of digits.

2 Technical Information

Display type:

7 segment LED

Character heights:

Indoor use: 60 / 100 / 150 / 200 / 250 mm

Outdoor use: 100 / 200 / 300 mm

Number of digits:

1...40

Number of lines:

Standard 1 line, multiple lines on request

Display colour:

Standard red, other colours on request

Operating voltage:

230 VAC / 50 Hz, 110 VAC / 60 Hz or 24 VDC ±20%

Interface:

Ethernet/IP

Connection

RJ45, 10/100 MBit/s,

configuration via RS232 interface

View:

Single sided to four sided

Displayable characters:

see corresponding chapter

Labelling:

on request

Housing:

Industrial version, powder coated aluminum

Housing colour:

RAL 7016 (anthracite)

Mounting:

Articulated arm, angle bracket, hanging on chain or

mounting frame

Protection:

see chapter “Device Configuration“

Operating temp.:

see chapter “Device Configuration“

Storage temp.:

-25 ... +70 °C

migan Ethernet IP

Large Format Numeric LED Display with Ethernet IP Interface

Page 4

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach

+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de

2.1 Device Configuration

Type:

for inside use for outside use

Character height:

60 mm 100 mm 150 mm 200 mm 250 mm 300 mm

Number of lines: ________ Number of digits per line: ________

Display colour:

red green yellow white blue

View:

single sided double sided ____ sided

Operating voltage:

230 VAC / 50 Hz 110 VAC / 60 Hz 24 VDC

Protection:

IP40 IP54 IP65 IP _____

Operating temperature:

with type for inside use: with type for outside use: special version:

0...+50 °C (standard) -20...+50 °C (standard)

-25...+50 °C (optional with heating) ____________ °C

Housing dimensions:_________x_________x_________mm

Housing Material:

Aluminum profile Stainless steel Sheet metal

migan Ethernet IP

Large Format Numeric LED Display with Ethernet IP Interface

Page 5

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach

+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de

2.2 Connector Pin Assignments

Please see inside labelling of the mating plugs for pin assignment.

Power Connector 230 VAC

Power Connector 24 VDC (optional)

Connector RS232-HMS

Assignment

(PE)

Assignment

GND

+24 VDC

Assignment

RxD

TxD

GND

migan Ethernet IP

Large Format Numeric LED Display with Ethernet IP Interface

Page 6

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach

+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de

Ethernet Socket

2.3 Device Start

Following things are displayed after power up:

Segment test

<first 2 digits of the baud rate > <parity> <data bits>

A<display address>

Shown parameters refer to the internal interface and are not significant

for Ethernet/IP operation.

Assignment

Tx +

Tx -

Rx +

Rx -

migan Ethernet IP

Large Format Numeric LED Display with Ethernet IP Interface

Page 7

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach

+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de

2.4 Ethernet IP Configuration

The software “Anybus Configuration Manager” of the company HMS serves for the

configuration of the interface. You can find this tool at the web page of the inter-

face manufacturer www.anybus.com in the area SUPPORT -> Anybus Communi-

cator -> Ethernet Serial Gateway.

Connect the display with a RS232 null modem cable (pins 2<->3, 3<->2,

5<->5) to a PC / Laptop.

Start the software.

Close the window “Konfiguration auswählen” with the button “Cancel”.

Press button “Verbinden” and after that button “Upload”.

Change only the marked fields according to your requirements

Click button “Download” to transmit the configuration to the interface.

Now the interface configuration is completed.

You can find the original configuration at our home page www.microsyst.de in the

area “Downloads & Support” -> “migan”-> “Ethernet IP” -> “Configuration File for

HMS Interface”.

Upload

Verbinden

Download

migan Ethernet IP

Large Format Numeric LED Display with Ethernet IP Interface

Page 8

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach

+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de

3 Control Data

3.1 Control Frame (Display Output)

The transmission bytes are written as of the address 0x202 into the display interface.

The corresponding Ethernet IP output addresses result from chapter “Memory Layout”

of the “Anybus Communicator EtherNet/IP / Modbus-TCP User Manual“

(www.anybus.com). Please pay attention to sufficient size of the output area.

LEN1

ADR

LEN2

►

Toggle

Byte*

Number of

following bytes

(from ADR to CHK)

Device

address

Number of

following bytes

(from O1 to CHK)

Options

00H…FFH

08H... n

01H

06H... n

Bit 7: report software version**

Bit 6: 0 = Statically display the

last received data

(standard)

1 = Display “----“, if no new

data are received within 5 s.

Bits 5...4: Brightness

00 = 100%

01 = 80%

10 = 60%

11 = 40%

Bit 3 = Digital output 4

Bit 2 = Digital output 3

Bit 1 = Digital output 2

Bit 0 = Digital output 1

Output will be set,

if corresponding bit = 1

** only at communication with response frame

*Toggle byte:

The toggle byte must be increased by 1, if the frame shall be processed

migan Ethernet IP

Large Format Numeric LED Display with Ethernet IP Interface

Page 9

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach

+49 9681 91960-0, +49 9681 91960-10, info@microsyst.de, www.microsyst.de

►

Output format

Bits 7...4: Physical number of digits (bit coded)

0001...1111 = 1...15 digits

0000 = ASCII representation with up to 40 digits

Bit 3: Mode

0 = LSB first: data byte D1 = lo

1 = MSB first

Bits 2...0: Data type* max. number of digits

000 = unsigned CHAR (0...255) 3

001 = unsigned INT (0...65535) 5

010 = unsigned LONG (0...4294967296) 10

011 = signed CHAR (-128...127) 4

100 = signed INT (-32768...32767) 6

101 = signed LONG (-2147483648... 2147483647) 11

110 = ASCII representation 40

111 = reserved

* at value representation: right-aligned display

at ASCII representation: left-aligned display

►

Decimal points / colons

Decimal points / colons, blinking

Bit 7 = Point for digit 1

Bit 6 = Point for digit 2

Bit 5 = Point for digit 3

Bit 4 = Point for digit 4

Bit 3 = Point for digit 5

Bit 2 = Point for digit 6

Bit 1 = Point for digit 7

Bit 0 = Point for digit 8

Bit 7 = Point for digit 9

Bit 6 = Point for digit 10

Bit 5 = Point for digit 11

Bit 4 = Point for digit 12

Bit 3 = Point for digit 13

Bit 2 = Point for digit 14

Bit 1 = Point for digit 15

Bit 0 = Display blinks

A point is set, if corresponding bit = 1

Either a decimal point or a colon can be displays (depending on ordering option).

migan Ethernet IP

Large Format Numeric LED Display with Ethernet IP Interface

Page 10

microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach

+49 9681 91960-0, +49 9681 91960-10, [email protected], www.microsyst.de

D1…Dn

CHK

Data bytes (value- or ASCII representation)

Checksum

Value representation:

CHAR value: 1 byte

INT value: 2 bytes

LONG value: 4 bytes

ASCII representation (max. 80 bytes):

1 byte per character, max. 40 digits,

Bit 7 = 1: digit blinks

The decimal point has character code 2CHor

2EHand is always set at the previous digit.

depending on S4-DIP5:

standard: 55H(fixed value)

LOW byte of the sum of

bytes ADR...Dn

Controlling devices with multiple display areas (e.g. 2 lines):

The partition from O2…Dn is used repeatedly according to the number of

display areas (see example 3).

Please attend to the maximum total frame length of 152 bytes.

Example 1:

Display with 4 digits, unsigned INT (LSB first), brightness = 60%, display value = 1.23

TB 09 01 07 20 41 40 00 7B 00 55

Example 2:

Display with 4 digits, ASCII representation, brightness = 60%, display value = 12.34

TB 0C 01 0A 20 46 00 00 31 32 2E 33 34 55

Example 3:

Display with 2 lines and 4 digits per line, unsigned INT (LSB first),

display value for line 1 = 1.23,

display value for line 2 = 5.67

TB 0E 01 0C 00 41 40 00 7B 00 41 40 00 37 02 55

\______________/\______________/

Line 1 Line 2

(O2...D2) (O2...D2)

Tabla de contenidos

Otros manuales de Monitor de microSYST

microSYST

microSYST Migan MPB FI/SI Manual de usuario

microSYST

microSYST migra MPB IZ Manual de usuario

microSYST

microSYST migra MPB CAN Manual de usuario

microSYST

microSYST mipan PN Manual de usuario

microSYST

microSYST migan MPB BCD Manual de usuario

microSYST

microSYST migan BCD Manual de usuario

microSYST

microSYST migra Serial Manual de usuario

microSYST

microSYST migra AD Manual de usuario

microSYST

microSYST migra PN Manual de usuario

microSYST

microSYST migan MPB Manual de usuario

microSYST

microSYST migra MPB PB Manual de usuario

microSYST

microSYST migan MPB AD Manual de usuario

microSYST

microSYST mipan AD Manual de usuario

microSYST

microSYST migan MPB ModbusRTU Manual de usuario

microSYST

microSYST miline S1X4 Manual de usuario

microSYST

microSYST migra MPB EN TCP/IP Manual de usuario

microSYST

microSYST migra Ethernet/IP Manual de usuario

microSYST

microSYST mipick MP Series Manual de usuario

microSYST

microSYST migra S1X4 Manual de usuario

microSYST

microSYST migan ModbusTCP Manual de usuario

microSYST

microSYST miline S1X4 Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación

microSYST migan Manual de usuario

Manuales populares de Monitor de otras marcas