Micron Security Products IMATB4H Manual de usuario
USER MANUAL
Thank you for purchasing our products.
The company is not responsible for any safety accidents caused by abnormal
operation of the product.
Please carefully read this User's Guide(in particular, precautions for safety) before
using this product .
COLOR VIDEO DOOR PHONE
Model no.: IMATB4H
7
12
1
3
5
5
8
9
13
6
Version1.1
6. Installation
9. System setting
1. Warning and Caution
Index
10. Specification
2. The function and name of each part
7. Buttons function
8. Operation guide
3. Features and main function
4. Package contents
5. Wiring diagram
Do not put the plug in the
socket simultaneously.
It may generate abnormal
heat or cause a fire.
Do not connect to other
products while in use.
It may cause breakdown.
Do not forcibly bend the cord
or put a heavy object on the
product.
It may cause a fire.
Do not use water, thinner or
a detergent used to wash oil
products when you wash the
exterior.
Make sure to wash it by using
a dry cloth to prevent any
breakdown or electric shock.
Do not install the product in a
humid place.
It may cause an electric
shock or a fire.
Do not forcibly pull out the
cord from the socket.
If the cord is damaged, it
may cause a fire or an
electric shock.
Do not put the plug in the
socket with a wet hand.
It may cause an electric
shock.
Do not disassemble, repair
or modify the product.
It may cause a fire, an electric
shock or an injury due to
malfunction of the product.
Do not use AC circuit breaker.
It may cause an electric shock.
warning
warning
1. Warning and caution
Make sure to follow the instructions to prevent any danger or property losses.
Warning
Death or serious
injury is expected. It indicates prohibition of contact.
It indicates disassembly.
It indicates dos and don’ts.
It indicates prohibition.
It indicates that the plug should be pulled out from the
socket.
Page1
NO NO
NO
NO
The socket holes
are lager than
usual.
If the socket holes are larger
than normal, do not put the
plug.
It may cause an electric shock
or a fire.
Make sure that dust or foreign
substances are not gathered
on the product.
Make sure to prevent foreign
substances from entering the
product.
It may cause a breakdown.
Do not put a heavy object on
the product.
It may cause a breakdown.
Do not disassemble the
product.
Avoid direct rays of the sun or
heating devices at a time of
installation.
Install the product in a flat and
stable place.
Otherwise, it may not function
properly.
Pull the plug if the product is
not used for a long time.
If the product generates
strange sound, make sure to
pull the plug immediately and
contact service center.
CAUTION
Caution
A injury or property
losses are expected. It indicates prohibition of contact.
It indicates disassembly.
It indicates dos and don’ts.
It indicates that the plug should be pulled out from the
socket.
It indicates prohibition.
Page2
Answer/Hang up
Choose/Adjust
Power switch On/Off
1
2
3
4
5
6
No.
Back button
Left button
Right button
Handset
Menu button
Item Function description
7
8
9
10
11
Enter system settings/Confirm
Unlock button
Answer button
Monitor button
Indicator light
Microphone
Choose/Adjust
Back/Hang up
Unlock
Answer/Call
Monitor
Power indicator light
Page 3
2. The function and name of each part
1
2 3 4 5
10
9
8
7
6
11
2.1 Front view
4
3
PWR1
VD1
DATA
GND
AD1
GND
PWR2
VD2
AD2
CCTV2
CCTV1
GND
GND
DATA
GND
VD
AD
GND
VCC
Port 1 Port 2
Port 3 Port 4
PWR1
VD1
DATA
GND
AD1
GND
PWR2
VD2
AD2
CCTV2
CCTV1
GND
GND
DATA
GND
VD
AD
GND
VCC
Port 1 Port 2
Port 3 Port 4
For connecting IMARJ
3Speaker 2
4Microphone
For connecting slave monitor
For connecting power supply
1
Speaker 1
1
2
Ports
2
2.1 Rear view
Ports detail
Page 4
Page 5
MODEL LIST
3. Features and main function
4. Package contents
4.3" color digital LCD, high definition
Talk hands free or with handset, meet different people’s favor
Friendly interface, simple operation
12 polyphonic ring-tones switch freely
3.1 Features
3.2 Main function
Unlock
Broadcast function
Monitor listening
Call transfer
Real-time monitoring to doorbell or CCTV camera
Make internal call to other monitors
Brightness, contrast, volume, display model and color adjustable
A D 1
DATA
GND
PWR
VD1
IMARJ
A D 1
DATA
GND
PWR
VD1
IMARJ
A D 1
DATA
GND
PWR
VD1
IMARJ
A D 1
DATA
GND
PWR
VD1
IMARJ
A D 1
DATA
GND
PWR
VD1
IMARJ
5. Wiring Diagram
Page 6
IMAPS
PWR1
VD1
DATA
GND
AD1
Port 1
IMAMD
V-OUT V-IN
M4 M3 M2 M1
IMAMD
V-OUT V-IN
M4 M3 M2 M1
5 wires
5 wires
5 wires
5 wires
5 wires
Cat-5
Cat-5
Cat-5
Cat-5
Cat-5
Cat-5
Cat-5
Cat-5
Wel co me
RF
M1
M2
M3
M4
ON
1 2
The DIP switch in
the last IMAMD
should set to be ON.
1.Refer to relevant wiring diagram for the system you have chosen and ensure you
have the correct cable.
2.Determine Monitor positions and heights:
-suggest to install at 1.5~1.6Meters;
-suggest distance between indoor monitor and doorbell is at least 350 mm;
3.Ensure no power supply connection before installation finished
4.Take off the bracket from the back of the monitor.
5.Install the bracket on the wall
6.Connect cables as per the wiring diagram indicated.
7.Fix the monitor onto the bracket.
8.Power on the monitor when the system wiring finished.
6. Installation
150cm
Page 7
Page 8
Buttons Functions
【Menu button】
Press this button to wake up the screen and display the system Settings menu in
standby mode.
Can able to enter into lower menu by adjusting left/right button to choose and
confirm any function
【Left button】
Press this button in the "Setting" menu, can browse though the menu；
Adjust function in each sub menu
【Right button】
Press this button in the "Setting" menu, can browse though the menu；
Adjust function in each sub menu
【Monitor button】
Press this button to watch door station. Press it again can swtich to other monitoring
Long
installed.
press will enable the listening mode(Only works when slave monitors are
【Answer button 】
Press this button to answer the call,
Short press can make internal call to other monitors, long press can make
broadcast in standby mode.(Only works when slave monitors are installed.)
【Unlock button】
The tenant can press this button to turn on the electric lock and let the visitor in.
[note] When there is an image, it can be unlocked!
In each sub menu, press this button to return to the main interface and be in
standby mode.
Press this button in the sub menu to return to the upper-level menu interface.
7. Buttons function
button】【Back
сhannel.
Tabla de contenidos
Otros manuales de Sistema de intercomunicación de Micron Security Products
