EasyMx PROv7
Introduction
introduction
page 4
ARM® Cortex™-M3 and Cortex™-M4 are increasingly popular
microcontrollers. They are rich with modules, with high performance and
low power consumption, so creating a development board the size of
EasyMx PRO™ v7 for Stellaris® was really a challenge. We wanted to
put as many peripherals on the board as possible, to cover many
internal modules. We have gone through a process of ne tuning
the board performance, and used 4-layer PCB to achieve maximum
eciency. Finally, it had met all of our expectations, and even
exceeded in some. We present you the board which is powerful,
well organized, with on-board programmer and debugger and
is ready to be your strong ally in development.
EasyMx PRO™v7 for Stellaris®development Team
EasyMx PRO™v7 for Stellaris®is
all about connectivity. Having
two dierent connectors for
each port, you can connect
accessory boards, sensors and
your custom electronics easier
then ever before.
Powerful on-board mikroProg™
programmer and hardware
debugger can program and
debug over 270 Stellaris®
ARM®microcontrollers. You
will need it, whether you are a
professional or a beginner.
Two connectors for each port Everything is already here
Amazing connectivity mikroProg™on board
TFT 320x240 with touch panel,
stereo mp3 codec, audio input
and output, navigation switch
and microSD card slot make a
perfect set of peripherals for
multimedia development.
Ready for all kinds of development
Multimedia peripherals
Just plug in your Click™board,
and it’s ready to work. We picked
up a set of the most useful pins
you need for development and
made a pinout standard you will
enjoy using.
For easier connections
mikroBUS™support
