MicroDome AV4655DN-08 Manual de usuario

MicroDome® Duo

Installation Manual

Models:

4 Megapixel

AV4655DN-08

AV4655DN-28

AV4655DN-NL

4 Megapixel WDR

AV4656 DN-08

AV4656DN -28

AV4656DN-NL

6 Megapixel

AV6655DN-08

AV6655DN-28

AV6655DN-NL

6 Megapixel WDR

AV6656DN-08

AV6656DN-28

AV6656DN-NL

10 Megapixel

AV10655DN-08

AV10655DN-28

AV10655DN-NL

Microdome Duo® Installation Manual

Page | 2 support@arecontvision.com

+1.818.937.0700 | 877.CAMERA.8 | www.arecontvision.com | avsales@arecontvision.com

Contents

Models................................................................................................................................................... 1

Package Content................................................................................................................................... 3

Warranty Information............................................................................................................................. 4

Camera Overview.................................................................................................................................. 5

Surface Installation................................................................................................................................ 6

Drop Ceiling Mount Adapter Plate Installation........................................................................................ 8

MDD-CAP Installation............................................................................................................................ 9

MDD-CMT/WMT Pendant Mount and Wall Mount Installation...............................................................10

MDD-FMA Flush Mount Installation......................................................................................................11

Pan and Tilt Adjustment........................................................................................................................14

Lens Replacement................................................................................................................................15

Usage of Ethernet cable other than included M/F PoE cable................................................................16

Connecting Digital I/O...........................................................................................................................17

AUX I/O use case example...................................................................................................................18

OUTPUT Relay Control and Function...................................................................................................19

INPUT Alarm Control and Detection.....................................................................................................20

Camera Power Up using PoE...............................................................................................................22

Use of Auxiliary Power..........................................................................................................................23

Camera Discovery, Setup, and Configuration.......................................................................................24

Network Protocols ................................................................................................................................25

General Remote Focus.........................................................................................................................26

AV IP Utility Focus Tab.........................................................................................................................28

Administration and Password Setting ...................................................................................................29

Reset to Factory Default.......................................................................................................................30

Troubleshooting....................................................................................................................................31

Support.................................................................................................................................................32

Microdome Duo® Installation Manual

Page | 3 support@arecontvision.com

+1.818.937.0700 | 877.CAMERA.8 | www.arecontvision.com | avsales@arecontvision.com

CAUTION!

1. Do not attempt to service a damaged unit yourself. Refer all servicing to qualified service personnel.

2. Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all

local codes and authorities having jurisdiction. Wiring should be UL Listed and/or Recognized wire

suitable for the application.

3. Always use hardware e.g. screws, anchors, bolts, locking nuts etc. which are compatible with mounting

surface and of sufficient length and construction to insure a secure mount.

Package Content

This equipment should be unpacked and handled with care. The original packaging is the safest container in

which to transport the unit and can be used if returning the unit for service. The packaging contains:

One (1) Arecont Vision Camera with Mounting Adapter Plate installed.

One (1) Drop Ceiling Mount Plate Adapter

One (1) I/O Cable

One (1) M-F CAT-5E Network Patch Cable with grommet (installed)

Blind Grommet

Standard Grommet

Grommet Insertion Tool

One (1) Security L-key

One (1) CD with Manual and Software

One (1) Mounting Template (Drop Ceiling/Surface Mount)

Four (4) Mounting Screws (#6x1” for wood or sheet metal)

Four (4) Mounting Dry Wall Anchors

Four (4) Ceiling Mount Mounting Screws #6-32 PPH UNC 1.0” LG.

Four (4) Box Mount Mounting Screws #8-32 UNC PTH 0.5” LG. (Low profile head)

One (1) Flat-head screwdriver

One (1) Philips head screwdriver

Microdome Duo® Installation Manual

Page | 4 support@arecontvision.com

+1.818.937.0700 | 877.CAMERA.8 | www.arecontvision.com | avsales@arecontvision.com

Warranty Information

Global (3 Year) Limited Warranty

ARECONT VISION warrants to Purchaser (and only Purchaser) (the “Limited Warranty”), that: (a) each

Product shall be free from material defects in material and workmanship for a period of thirty-six (36) months

from the date of shipment (the “Warranty Period”); (b) during the Warranty Period, the Products will materially

conform with the specification in the applicable documentation; (c) all licensed programs accompanying the

Product (the “Licensed Programs”) will materially conform with applicable specifications. Notwithstanding the

preceding provisions, ARECONT VISION shall have no obligation or responsibility with respect to any Product

that (i) has been modified or altered without ARECONT VISION’s written authorization; (ii) has not been used

in accordance with applicable documentation; (iii) has been subjected to unusual stress, neglect, misuse,

abuse, improper storage, testing or connection; or unauthorized repair; or (iv) is no longer covered under the

Warranty Period. ARECONT VISION MAKE NO WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED,

STATUTORY OR OTHERWISE, OTHER THAN THE EXPRESS LIMITED WARRANTIES MADE BY

ARECONT VISION ABOVE, AND ARECONT VISION HEREBY SPECIFICALLY DISCLAIMS ALL OTHER

EXPRESS, STATUTORY AND IMPLIED WARRANTIES AND CONDITIONS, INCLUDING THE IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT

AND THE IMPLIED CONDITION OF SATISFACTORY QUALITY. ALL LICENSED PROGRAMS ARE

LICENSED ON AN “AS IS” BASIS WITHOUT WARRANTY. ARECONT VISION DOES NOT WARRANT THAT

(I) THE OPERATION OF THE PRODUCTS OR PARTS WILL BE UNINTERRUPTED OR ERROR FREE; (II)

THE PRODUCTS OR PARTS AND DOCUMENTATION WILL MEET THE END USERS’ REQUIREMENTS;

(III) THE PRODUCTS OR PARTS WILL OPERATE IN COMBINATIONS AND CONFIGURATIONS

SELECTED BY THE END USER; OTHER THAN COMBINATIONS AND CONFIGURATIONS WITH PARTS

OR OTHER PRODUCTS AUTHORIZED BY ARECONT VISION OR (IV) THAT ALL LICENSED PROGRAM

ERRORS WILL BE CORRECTED.

For RMA and Advance Replacement information visit http://www.arecontvision.com

Microdome Duo® Installation Manual

Page | 5 support@arecontvision.com

+1.818.937.0700 | 877.CAMERA.8 | www.arecontvision.com | avsales@arecontvision.com

Camera Overview

The MicroDome Duo multi-sensor, multi-megapixel 2-dome cameras provide users with professional

surveillance experience for a variety of network surveillance requirements.

The MicroDome Duo multi-megapixel cameras series feature a choice of 4-, 6- or 10-megapixel resolution

options, including 4- and 6-megapixel WDR options.

These remote focus true day/night cameras are available with a choice of lenses including 2.8mm, 8mm or no

lens options.

For added flexibility, users can place both individual three-axis lens gimbals independently in any direction

These cameras are ideal for indoor and outdoor use and deliver excellent low light imaging.

Regardless of time-of-day, this camera is ideal for applications with challenging lighting conditions. The series

combines a day/night mechanical IR cut filter for the highest image quality at any time of day. For applications

with bright or over saturated lighting conditions, optional wide dynamic range delivers up to 100dB at full

resolution and is available on select 4 and 6MP models. For applications with poor low lighting conditions,

Binning Mode increases the camera’s low light performance by combining pixels so that more light can be

collected.

MicroDome Duo cameras are designed for demanding environments. They are rated IP 66 for dust and water

ingress protection and rated IK-10 for vandal resistance.

The cameras offer advanced streaming capabilities and is designed on an efficient H.264 encoding platform

capable of delivering high quality video without straining the network. Power can be supplied via a single

Power-over-Ethernet compliant network cable or with power from a 12-48V DC/24V AC power supply.

The camera's interface allows for an intuitive, fast, and easy configuration; while the Free AV IP Utility tool

allows users to quickly configure multiple cameras at one time. The MicroDome Duo is PSIA (Physical Security

Interoperability Alliance) compliant, providing interoperability between network video products regardless of

manufacturer.

Microdome Duo® Installation Manual

Page | 6 support@arecontvision.com

+1.818.937.0700 | 877.CAMERA.8 | www.arecontvision.com | avsales@arecontvision.com

Surface Installation

1. Determine a secure location to mount the camera.

2. Use the supplied security L-key, to loosen the four (4) screws which secure the cover.

PIC. 1

3. Remove the cover. Do not remove screws from the dome cover.

4. Use Phillips screwdriver to loosen the four (4) screws securing the camera to adapter plate.

PIC. 2 (some parts removed for clarity)

5. Separate Camera from Adapter Plate Do not remove the screws.

6. Use Surface Mount template and cable location to create mounting provisions for the camera.

7. Mount Adapter Plate by installing mounting hardware in 4 slots “B” in adapter plate

Microdome Duo® Installation Manual

Page | 7 support@arecontvision.com

+1.818.937.0700 | 877.CAMERA.8 | www.arecontvision.com | avsales@arecontvision.com

PIC. 3

PIC 4

8. Re-attach camera to adapter plate (Reverse step 4 and 5)

9. Re-attach cover to camera (Reverse step 2 and 3)

Microdome Duo® Installation Manual

Page | 8 support@arecontvision.com

+1.818.937.0700 | 877.CAMERA.8 | www.arecontvision.com | avsales@arecontvision.com

Drop Ceiling Mount Adapter Plate Installation

Repeat step 1-5 of Surface Installation (See Pic. 1-3)

6. Use template and cable location to create mounting provisions for the Plate. Use 3/16” drill bits for four

mounting holes in Drop Ceiling Panel.

7. Using enclosed #6-32 screws attach enclosed Drop Ceiling Mount Plate Adapter and Adapter Plate

onto opposite sides of Drop Ceiling Panel, so the panel is “sandwiched” between Adapter Plate and

Drop Ceiling Mount Plate Adapter. Use 4 slots “B” in Adapter Plate.

8. Re-attach camera to adapter plate (Reverse step 4 and 5)

9. Re-attach cover to camera (Reverse step 2 and 3)

10. Re-install the Drop Ceiling Panel and plug Customer Ethernet cable into female end of Camera

Ethernet cable.

PIC. 5

Microdome Duo® Installation Manual

Page | 9 support@arecontvision.com

+1.818.937.0700 | 877.CAMERA.8 | www.arecontvision.com | avsales@arecontvision.com

MDD-CAP Installation

Repeat step 1-5 of Surface Installation (See Pic. 1-3)

6. Insert Adapter Plate into the Cap and attach it to the cap, using the 4 screws through 4 “A” holes using

enclosed #6-32 screws.

Adapter Plate Cap

PIC 6.

7. Re-attach camera to adapter plate (Reverse step 4 and 5)

8. Re-attach cover to camera (Reverse step 2 and 3)

PIC. 7

Microdome Duo® Installation Manual

Page | 10 support@arecontvision.com

+1.818.937.0700 | 877.CAMERA.8 | www.arecontvision.com | avsales@arecontvision.com

MDD-CMT/WMT Pendant Mount and Wall Mount Installation

Assembly (Pic. 7) can be used with wall mount or ceiling mount

PIC 8

PIC. 9

Use MCD-CMT and MCD-WMT installation instructions for reference.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Videocámara de otras marcas

Toshiba

Toshiba CAMILEO Z100 Manual de usuario

Panasonic

Panasonic NV-VS40B Manual de usuario

Canon

Canon RC 260 Manual de usuario

Sony

Sony Handycam DCR-DVD7E Manual de usuario

Brinno

Brinno TimeLapse TLC200 Manual de usuario

JVC

JVC GR-SXM68AC Guía de inicio rápido

Panasonic

Panasonic AG-HMC152EN Manual de usuario

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Manual de usuario

MYDLINK

MYDLINK DCS-6100LH Manual de usuario

Sony

Sony video Hi8 Handycam CCD-TR555 Manual de usuario

SECURECOM

SECURECOM V-5014B Manual de usuario

Panasonic

Panasonic HDC-SD100 Manual de usuario

Sharper Image

Sharper Image U-VIDEO Manual de usuario

JVC

JVC AA-V15EG Manual de usuario

Canon

Canon LEGRIA HV40 Manual de usuario

Sony

Sony Handycam DCR-VX2000 Manual de usuario

RCA

RCA CC616 Manual de usuario

Panasonic

Panasonic NVM40 Manual de usuario