Microcare 600W 12V Manual de usuario
Pure Sine Wave UPS
600W-12V
User Manual
Manual Version: INV-600W-12V-2022-3
1
Table of Contents
1. INTRODUCTION...................................................................................................................2
1.1 General Description ........................................................................................................2
1.2 Key Features...................................................................................................................2
2. SAFETY INSTRUCTIONS ....................................................................................................2
2.1 Installation Location ........................................................................................................2
2.2 Precautions When Working with Batteries......................................................................2
2.3 Battery Reverse Polarity Connection ..............................................................................2
3. UPS OVERVIEW ..................................................................................................................3
3.1 UPS Side View................................................................................................................3
3.2 Status LED’s & Reset Switch ..........................................................................................4
3.2.1 State of Charge ........................................................................................................4
3.2.2 Charging...................................................................................................................4
3.2.3 Error LED..................................................................................................................4
3.2.4 Reset Button.............................................................................................................4
4. GENERAL WIRING INFORMATION.....................................................................................5
4.1 Battery Wiring..................................................................................................................5
4.2 AC Connections..............................................................................................................6
4.3 More Devices Connected................................................................................................7
5. TROUBLE SHOOTING.........................................................................................................8
6. SPECIFICATIONS................................................................................................................9
7. LIMITED CARRY- IN WARRANTY.....................................................................................10
8. REGISTRATION OF MY MICROCARE PRODUCT ...........................................................12
2
1. INTRODUCTION
1.1 General Description
The Microcare 600W 12V UPS is designed as an easy plug-in solution for loadshedding and backup
power for domestic and business applications. When the grid returns with a fluctuating voltage, the
UPS can delay to a set transfer time to avoid load damage.
1.2 Key Features
•Lithium Iron Phosphate Battery (LiFePO4)
•Stainless Steel Enclosure or Powder coated option available
•No Programming Required
•High Surge Capacity
•Low Idle Current
•12V Socket Output
•220V Output for Lights, TV & Laptops
•5V USB Output for Cell phone Charging
•Fan Cooling for Optimum Performance
•Protection against Short Circuit
•5 Year Carry-In Warranty (excluding the battery)
•Minimum Service Turnaround
2. SAFETY INSTRUCTIONS
2.1 Installation Location
•Place the UPS indoor in a dry protected location away from any sources of moisture.
•The mounting surface must support the weight of the UPS.
•Exposure to saltwater is particularly destructive.
•Do not place the UPS in a closed container.
•Unrestricted airflow is required for the UPS to operate at optimal efficiency.
•Ensure a 200mm unrestricted clearance at the top, left and right side of the UPS.
2.2 Precautions When Working with Batteries
•Ensure that both circuit breakers are switched off and all loads disconnected before
connecting or disconnecting the battery leads.
•Be cautious not to drop any tool or metal objects on the battery, this can cause a short circuit
or spark and could cause an explosion.
•Remove metal items like rings, bracelets and watches when working with batteries, this could
cause a short circuit and cause a severe burn.
2.3 Battery Reverse Polarity Connection
•Incorrect battery polarity connection can cause severe damage to the UPS.
3
3. UPS OVERVIEW
3.1 UPS Side View
Figure 3-1
12V DC Outlet
USB Charger
Reset Switch
Plug “AC” Circuit Breaker
Battery “DC”Circuit Breaker
Status LED’s
Fan
220V AC UPS Outlet
Socket
Fuse
220V AC Inlet Plug
4
3.2 Status LED’s & Reset Switch
Y = Yellow LED G = Green LED R = Red LED
3.2.1 State of Charge
1ST Yellow LED solid on = Low State of Charge
2nd Yellow LED solid on = Medium State of Charge
Green LED solid on = High State of Charge
3.2.2 Charging
Green LED flashing = Battery Charging
Note the battery only charges when ESKOM is present
3.2.3 Error LED
Red LED solid on = Error
The error occurs when the system is overloaded
3.2.4 Reset Button
To clear the error LED. Disconnect or reduce the load and push the Reset Button for 3
seconds. The UPS should restart.
5
4. GENERAL WIRING INFORMATION
•Familiarize yourself with the content of the manual following before commencing with the
wiring.
4.1 Battery Wiring
•Ensure that the Battery and Plug circuit breaker is in the off position.
•UPS AC inlet plug is unplugged form the wall socket.
•Remove the front/side and back panel screws.
•Remove the front cover.
•Insert the battery into the battery compartment.
•Battery Positive to the left and battery Negative to the right.
•Connect the Positive (Red) battery lead from the UPS to the positive post of the battery.
•Connect the Negative (Black) battery lead from the UPS to the negative post of
the battery.
•Ensure that the battery lead lugs are properly tightened.
•Refit the front cover.
6
4.2 AC Connections
•Turn the Battery Circuit Breaker to the “ON” position .
•Turn the Plug Circuit Breaker to the “ON” position .
•Connect the device plug TV “AC Load egg: TV” into the UPS plug socket and switch
the socket to the “ON” position.
•Switch the TV on and check if it is operating as normal.
•Connect the AC inlet plug into the Wall Socket and switch the wall socket to the “ON”
position.
Fig 4-1
7
4.3 More Devices Connected
8
5. TROUBLE SHOOTING
The AC Circuit Breaker Trips
UPS is overloaded
Reduce the load by unplugging some devices.
Press the AC Circuit breaker button to reset the UPS
The DC Circuit Breaker Trips
UPS is overloaded
Reduce the load by unplugging some devices
Turn the DC circuit breaker to the on position
The red LED is solid on
UPS is overloaded
Reduce the load and push the reset button for 3 seconds
Battery Not Charging
Loadshedding
Wait until loadshedding is over
Wall socket switched off
Ensure the ups Inlet Plug is connected to the wall outlet socket and
that the wall socket is switched on
If the UPS does not switch on, it is possibly caused by DC reverse polarity or short circuit.
•Disconnect all AC loads
•Unplug the AC inlet plug from the wall
•Switch off the battery circuit breaker
SPECIFICATIONS
9
6. SPECIFICATIONS
Model
600W 12V
OUTPUT
Output AC Voltage
230VAC
AC Amps
2.6A
Rated Power
600W
Surge Power
800W
Wave Form
Pure Sine
AC Regulation
+/- 5%
THD
< 3%
Frequency
50Hz
INPUT
DC Voltage
12
DC Amps Max
100A
Voltage Range
11-14V
Efficiency
80% Plus
AC Circuit Breaker
3A
DC Circuit Breaker
63A
PROTECTION
Overload
Auto Shutdown & Manual Restart
Over/Under Voltage
Auto Shutdown
Over Temperature
Auto Shutdown & Reset
Output Short
Auto Shutdown & Manual Restart
Cooling
Fan Cooled
ENVIRONMENT
Room Temp
20-40 °C
DIMENSIONS
(LxHxW)
41cmx51cmx18cm
Tabla de contenidos
Otros manuales de Unión Postal Universal de Microcare
Manuales populares de Unión Postal Universal de otras marcas
Pylontech
Pylontech Victron & Pylontech US5000 Manual de usuario
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Manual de usuario
Mecer
Mecer ME-1000-WTU Manual de usuario
Mustek
Mustek PowerMust 530(B) Plus Manual de instalación y operación
Emerson
Emerson Liebert NXL series Manual de usuario
MAKELSAN
MAKELSAN BOXER SERIES Manual de usuario
