5
24.11.14 / V 01.0-EN
5. General Safety Information
Before u ing the machine, the operating manual and the afety information have to be
read in full and all in truction contained therein have to be followed. Safety in truc-
tion uch a DIN, VDE, CEE, AFNOR and further in truction valid in the country of u e
have to be trictly ob erved.
The e in truction cover the operating and handling of the machine including tool and
acce orie a well a machine maintenance.
Di regarding the e e tabli hed afety recommendation may cau e eriou hazard . It
mu t be garanteed that the machine operator ha clearly under tood the following
recommendation and that he ha acce to them at any time.
The tep given below mu t be taken by the operator in any ca e to avoid improper
handling of the machine or to prevent accident .
In tallation
•
The machine mu t only be connected to the voltage indicated on the machine'
label.
Danger to life from electrocution
•
Before tarting maintenance work di connect the machine from the power
plug. The machine ha to be unplugged and volt-free.
•
Before each u e check plug, cable and machine for ign of damage.
•
The machine mu t be kept dry and not u ed in damp location or humid envi-
ronment .
•
If u ed outdoor, the machine mu t be protected by a re idual-current circuit
breaker with a maximum tripping current of 30.
•
In ert plug only when machine i witched off. Di connect machine from power
plug after u e.
Mandatory working clothes
•
Alway wear afety goggle , ear protection, protective glove and afety hoe
when working with the machine.
•
Wear tight-fitting clothe .
Safety Information
