•
The machine and its accessories have to be keept far from children.
•
Keep clean and well lit working area
•
Place the machine in a way that the loading operation can take place in complete safety
•
Do not use pipes or electrical cable to move the car. Use the handle for transport. Do not move the compressor with the
tank under pressure.
The compressor has to work on a secure, horizontal and dry plane. Do not direct water jets and / or flammable liquids on the
compressor, or use them for cleaning. Do not place flammable objects close to the compressor.
The machine has been designed to work with compressed air. And it is forbidden to use the machine to compress other types
of fluid. The use of the compressor with tools that are not standard requires compliance with specific rules and a minimum
distance of 3 m between the work area and the compressor.
It 's normal that the compressor will heat up slightly. Avoid touching the metal parts, in particular the pressure regulator.
Wait at least 10 seconds before restarting the machine after the stop. Always ensure good ventilation to the engine, leaving
open the air vents.
Remember that opening the drain valve you will generate a rapid reaction (recoil) on the pipe ( 10005). The intensity of this
reaction depends on the pressure at which the pump is loaded, but is in any case less than 20 N (~ 2 kg).
Firmly grasp the
pipes before opening the taps. Keep away strangers and especially children. Never direct the hoses at people, animals or
things.
When the machine works it makes a sound pressure of less than 3dB. The opening of the quick tap can exert acoustic
pressures of up to 113dB (in the case where the pipe is not inserted into the drain to uncklog).
Insert the hose into the drain
before opening the tap quickly. Wear hearing protection devices.
Attention! The warranty that covers the machine and all its accessories declines in the case of failure to
observe the instructions given in this booklet.
DANGEROUS AREAS
The machine presents no danger zones if all the protections are not removed or if they are not damaged.
Check periodically the efficiency, in order to ensure mechanical protection of the organs in movement and insulation of
electricalparts.
Avoid working on the nozzles under pressure: risk of thrown objects at high speed and micro abrasions and cuts to the skin
in the case of sudden jets from the nozzle itself.
SAFETY DEVICES
The machine does not of itself require special safety devices. The emergency stop is not expected because there would be
improvements in terms of safety compared to a normal stop.
In the case of the specific risks of plant would require precautions for safety, it is good to have foreseen them during the
preparation. Please contact our helpline for advice and special designs.
SEGNALS
RESIDUAL RISKS
During the installation carefully evaluate residual risks related to the job you are performing: environmental conditions,
lighting, maintenance condition of your tools.
DPI generic such as gloves and safety shoes are highly recommended to reduce the risk of injury related to the work of
installation rather than the system itself.
Maintenance
Maintenance
