MFJ MFJ-185 Manual de usuario

12 MONTH LIMITED WARRANTY

MFJ Enterprises, Inc. warrants to the original owner of this product, if manufactured by MFJ

Enterprises, Inc. and purchased from an authorized dealer or directly from MFJ Enterprises,

Inc. to be free from defects in material and workmanship for a period of 12 months from date

of purchase provided the following terms of this warranty are satisfied.

1. The purchaser must retain the dated proof-of-purchase (bill of sale, canceled check, credit

card or money order receipt, etc.) describing the product to establish the validity of the

warranty claim and submit the original or machine reproduction of such proof-of-purchase to

MFJ Enterprises, Inc. at the time of warranty service. MFJ Enterprises, Inc. shall have the

discretion to deny warranty without dated proof-of-purchase. Any evidence of alteration,

erasure, or forgery shall be cause to void any and all warranty terms immediately.

2. MFJ Enterprises, Inc. agrees to repair or replace at MFJ’s option without charge to the

original owner any defective product under warranty, provided the product is returned postage

prepaid to MFJ Enterprises, Inc. with a personal check, cashiers check, or money order for

$7.00 covering postage and handling.

3. MFJ Enterprises, Inc. will supply replacement parts free of charge for any MFJ product under

warranty upon request. A dated proof-of-purchase and a $5.00 personal check, cashiers

check, or money order must be provided to cover postage and handling.

4. This warranty is NOTvoid for owners who attempt to repair defective units. Technical

consultation is available by calling (662) 323-5869.

5. This warranty does not apply to kits sold by or manufactured by MFJ Enterprises, Inc.

6. Wired and tested PC board products are covered by this warranty provided only the wired

and tested PC board product is returned. Wired and tested PC boards installed in the

owner’s cabinet or connected to switches, jacks, or cables, etc. sent to MFJ Enterprises, Inc.

will be returned at the owner’s expense unrepaired.

7. Under no circumstances is MFJ Enterprises, Inc. liable for consequential damages to person or

property by the use of any MFJ products.

8. Out-of-warranty Service: MFJ Enterprises, Inc. will repair any out-of-warranty product

provided the unit is shipped prepaid. All repaired units will be shipped COD to the owner.

Repair charges will be added to the COD fee unless other arrangements are made.

9. This warranty is given in lieu of any other warranty expressed or implied.

10. MFJ Enterprises, Inc. reserves the right to make changes or improvements in design or

manufacture without incurring any obligation to install such changes upon any of the

products previously manufactured.

11. All MFJ products to be serviced in-warranty or out-of-warranty should be addressed to MFJ

Enterprises, Inc., 300 Industrial Park Road, Starkville, Mississippi 39759, USA and must be

accompanied by a letter describing the problem in detail along with a copy of your dated

proof-of-purchase.

12. This warranty gives you specific rights, and you may also have other rights which vary from

state to state.

MFJ-185

MFJ Deluxe DXer’s Digital Watch

General Information and Operating Instructions

Thank you for purchasing the MFJ-185 Deluxe DXer’s Digital Watch. Because of the

many features of this watch it can be complicated and difficult to use. Please readthese

instructions carefully before use.

FEATURES:

•Elegant world time travel clock with large display.

•World time of 50 different cities.

•Typical high and low temperatures of each city for every month of the year.

•Country code and area code of each city.

•Alarm

•Automatic current temperature measurement.

•Temperature display in Celsius or Fahrenheit.

•12 / 24 Hour format.

•E.L. Backlight

•Water Resistant Construction

SPECIFICATIONS:

•Accuracy at normal operating temperature: +/-30 seconds a month.

•Calendar: semi-auto-calendar pre-programmed until the year 2050.

•Temperature range: -10°C to 60°C

•Temperature accuracy: -10°C to 9.9°C: +/-3°C

10°C to 40°C: +/-2°C

41°C to 60°C: +/-3°C

BATTERY INSTALLATION & REPLACEMENT

•The MFJ-185 already comes with the battery installed.

•When the LCD becomes dim or goes out completely replace the battery. Follow these steps:

1. Remove the 4 screws on the back of the watch with a jeweler’s screwdriver and remove

the cover.

2. Remove a screw from the bracket holding the battery.

3. Remove the old battery and replace with a 3V, CR2025 coin battery or equivalent.

4. After replacing the battery, replace all parts & screws.

MODES OF OPERATION

Press the MODE button to cycle through the different modes. The three modes are: Normal Time

Mode, World Time Mode, and Alarm Time Mode.

NORMAL TIME MODE

In the Normal Time Mode, the time will be displayed in the below the world map with the seconds

running. The Month and Date will be displayed in the upper right corner. The upper left of the

LCD will show the ambient temperature or the day of the week.

Button Functions in Normal Time Mode:

DATE/TEMP –Toggles upper left display between temperature and day of the week

12/24 °C/°F–When the upper left part of the LCD displays temperature, this button toggles the

display between °C and °F. When the upper left part of the LCD displays the day of the week, this

button toggles the time display between 12 Hr and 24 Hr format.

SET –Briefly pressing the SET button will illuminate the E.L. Backlight for about 3 seconds.

When the upper left part of the LCD displays temperature, pressing and holding the SET button

will adjust the temperature down 3°C and a hand icon will appear on the LCD by the temperature.

This is for body temperature adjustment. When the upper left part of the LCD displays the day of

the week, pressing and holding the SET button will initiate the Time Setting Mode.

Notes about Temperature:

•When the watch is worn on the wrist, your body temperature will affect the temperature

reading and the accuracy will decrease.

•When the ambient temperature changes rapidly, the MFJ-185 may take up to 30 minutes to

achieve an accurate reading.

•For the most accurate temperature reading, remove the watch from your wrist and place it in

the environment to be measured.

•Do not expose the temperature to direct sunlight. Exposure to direct sunlight can cause the

temperature to read higher than the actual temperature and not be accurate.

Time Setting Mode

Follow these steps for Setting the MFJ-185:

•Be sure you are in Normal Time Display Mode and the Day of the week appears in the upper

left corner of the LCD.

•Press the SET button and hold for a few seconds until the seconds digits begin to flash.

•Press the DATE/TEMP button to reset the seconds to “00”.

•Press the MODE button and the hour digits will begin to flash.

•Press the DATE/TEMP button to advance the hour.

•Press the MODE button and the minutes digits will begin to flash.

•Press the DATE/TEMP button to advance the minutes.

•Press the MODE button and the year digits will begin to flash.

•Press the DATE/TEMP button to advance the year.

•Press the MODE button and the month digits will begin to flash.

•Press the DATE/TEMP button to advance the month.

•Press the MODE button and the date digits will begin to flash.

•Press the DATE/TEMP button to advance the date.

•To continue in the Time Setting Mode, pressing the MODE button will cycle through the

settings.

•To exit the Time Setting Mode, pressing the SET button briefly and the LCD will return to

the Normal Time Mode.

WORLD TIME MODE

In Normal Time Mode, press the MODE button once to enter World Time Mode. In the World

Time Mode, the city abbreviation will be displayed in the upper left corner of the LCD. The time

in that city will be displayed in the upper right corner of the LCD. The country code & area code,

high temperature, or low temperature will be displayed below the world map. Please see the table

below for city abbreviations:

Abbr. City Abbr. City Abbr. City Abbr. City

AKL Auckland CPH Copenhagen LON London SFO San Francisco

AMS Amsterdam CPT Cape Town LUX Luxembourg SHA Shanghai

ATH Athens DUB Dublin MEL Melbourne SIN Singapore

BCN Barcelona DXB Dubai MEX Mexico STO Stockholm

BER Berlin FRA Frankfurt MNL Manila SYD Sydney

BJS Beijing HEL Helsinki MOW Moscow TPE Taipei

BKK Bangkok HKG Hong Kong NYC New York City TYO Tokyo

BOM Bombay HNL Honolulu OSL Oslo VIE Vienna

BRU Brussels JER Jerusalem PAR Pairs YTO Toronto

BUE Buenos Aires JKT Jakarta RIO Rio De Janeiro YVR Vancouver

CAI Cairo LAX Los Angeles ROM Rome ZRH Zurich

CAS Casablanca LIM Lima SCL Santiago

CHI Chicago LIS Lisbon SEL Seoul

Button Functions in World Time Mode:

DATE/TEMP –When the Country Code and Area Code are displayed below the world map, this

button will cycle through the 50 cities in alphabetical order. When the typical high or low

temperature is displayed below the world map, this button will cycle through the typical

temperatures for each month of the year. The month for which the temperature is displayed is

located in the lower right corner next to the temperature.

12/24 °C/°F–When the Country Code and Area Code are displayed below the world map, this

button will let you adjust the time of the city displayed if Daylight Savings Time is observed. DST

will appear in the upper right corner buy the city time when enabled. When the high or low

temperature is displayed below the world map, this button will toggle between the typical high and

low temperature for the month displayed.

SET –Briefly pressing the SET button will illuminate the E.L. Backlight for about 3 seconds and

toggle between the typical temperature information and County Code and Area Code information.

Pressing and holding the SET button will allow you to adjust the time of the city displayed.

World Time Setting Mode

Please note that although you may have correctly set the time in Normal Time Mode, the time

displayed in the World Time Mode may not be correct. You must set the time in the World Time

Mode to match the time in Normal Time Mode. Follow these steps to ensure the world time and

normal time match:

1. In World Time Mode, cycle through the cities until you come to a city in your time zone.

2. Be sure that the Country Code and Area Code information is displayed below the world map.

If it is not briefly press the SET button.

3. With the Country Code and Area Code information displayed below the world map, press and

hold the SET button until the hour digits flash in the upper right corner.

4. Press the DATE/TEMP button to adjust the hour to the current hour in your time zone.

5. Press the MODE button and the minutes will begin to flash.

6. Press the DATE/TEMP button to adjust the minutes to the current time in your time zone.

7. Press the SET button briefly to exit the World Time Setting Mode.

ALARM TIME MODE

In Normal Time Mode, press the MODE button twice to enter Alarm Time Mode. In World Time

Mode press the MODE button once to enter the Alarm Time Mode. In Alarm Time Mode, “AL”

will appear in the upper left corner above the world map andthe actual time will appear in the

upper right corner above the world map. The alarm time will appear below the world map. To set

the alarm time, follow these steps:

1. Press and hold the SET button until the hour digits of the alarm time begin to flash.

2. Press the DATE/TEMP button to adjust the hour.

3. Press the MODE button and the minutes digits will begin to flash.

4. Press the DATE/TEMP button to adjust the minutes.

5. To exit Alarm Time Setting Mode, briefly press the SET button.

Note: If no buttons are pressedfor 1 minute after entering Alarm Time Setting Mode, the MFJ-

185 will automatically exit and return to Normal Time Mode.

In the Alarm Time Mode, press the 12/24 °C/°F button to enable the alarm. A small bell will

appear in the lower right corner next to the time when enabled. Press the 12/24 °C/°F button

again to disable the alarm and the bell will disappear. When the actual time reaches the Alarm

Time, the alarm will sound. To stop the alarm sound, press any button.

NEVER USE THE MFJ-185 WATCH FOR THE FOLLOWING:

•Clinical thermometer

•Temperature control for chemicals

•Water temperature gauge submerged for many hours

•Water temperature gauge for hot water exceeding 40°C (102°F)

Otros manuales de Mirar de MFJ

MFJ

MFJ MFJ-186RC Manual de usuario

Manuales populares de Mirar de otras marcas

Pandora

Pandora WATCH2 Manual de usuario

Casio

Casio QW-4343 Manual de usuario

Suunto

Suunto X6 Manual de usuario

Seiko

Seiko N830 Manual de usuario

MotionX

MotionX 365 Manual de usuario

Garmin

Garmin VENU SQ 2 Manual de usuario

QCY

QCY Watch GTC Manual de usuario

Canyon

Canyon Cindy CNE-KW41WP Manual de usuario

Esq

Esq Watches Guía de instalación

Crane

Crane AA5-CDSM-3A Manual de usuario

Timex

Timex W-214 Manual de usuario

DETOMASO

DETOMASO MATERA Manual de usuario

Geemarc

Geemarc Watch N Shake Manual de usuario

LORUS

LORUS W590 Manual de usuario

STENLILLE

STENLILLE Actío Manual de usuario

Casio

Casio 5594 Manual de usuario

Sinn

Sinn HUNTER'S WATCH 3. Edition Manual de usuario

Slazenger

Slazenger SLZ800 Manual de usuario