3
3 Quick Start
The c|AQWO external power supply is adjusted at the factory for a nominal voltage corresponding to the
electrical network of your country.
Install the c|AQWO units on a Hi-Fi rack or on a stable and strong support.
Do not install the units directly on a carpet or flammable material.
Do not put any object on the top of the units.
Before starting open the remote control and insert the provided batteries.
A. Plug the digital source(s) to the digital inputs
B. Connect the analogue output to your amplifier or pre-amplifier
C. Plug the interconnect power connectors between the main unit and the PSU
D. Plug the PSU to the AC with the supplied power cord or a compatible cord
E. Start the unit with the main power switch, the screen lights up
F. Select the digital input on the touchscreen
G. Play your music !
Should it fail to operate:
- Turn off and unplug the units
- Check the fuses
- Start again the Quick Start procedure
- If there is no difference, please contact Métronome Technologie Factory.
The touchscreen should be alight when the unit operates.
Thepowersupplycanbeswitchedonduringalongperiod.Betweenlisteningsessions,pleaseputthedeviceon
stand-by. For a prolonged absence, it is advised to switch it off and unplug the unit from the AC network.
The powersupplyisprotectedbyinternal electronic circuitsandbyageneral fuselocated inthe block nearthe
maincordbesidetheswitch.Tochangethefuse,itismandatorytounplugthemainpowercablebeforeopening
the fuse compartment with ascrewdriver.Thenreplacethefuse bythesamemodel:1A,temporisedfuse(eq.
slow burn). NEVER CHANGE THE FUSE VALUE.
