5
3 Plug In
STEP 1.
Plug the Geeni device into the wall.
Make sure the indicator light on the
device is flashing rapidly blue, indicating
the device is ready to connect.
Solid: Connected
Blinking fast: Easy Mode
Blinking slow: AP Mode
On: Switch On
Off: Switch Off
How do I reset the device and
what does the blinking light mean?
Reset the plug by pressing and holding the button
for 3 seconds until the indicator light is flashing rapidly.
- Reset one time (press and hold) to reach Easy mode (Fast blinking blue, 2x per second)
- Reset again (press and hold) to reach AP Mode (Slow blinking blue, every 3 seconds)
