4
Ramses MSC Tutorial Guide :
Modifier Memory Buttons25
How to copy parameters from one channel to another 25
Solo 26
Transport Controls 27
The Main Transport Controls 27
How to manually enter a number into the Timecode Display 27
How to reset the display to 00.00.00.00 27
How to reset the display to Active Mode at any time 28
How to capture a TimeCode location while the display is in active mode 28
How to store a TimeCode location 28
How to locate to the currently displayed TimeCode location 28
How to locate to a stored TimeCode location 28
How to initiate 'Cycle' mode 28
Quick Locator Controls 29
How to store a TimeCode location into a Quick Locate memory button 29
How to locate to a TimeCode location stored in a Quick Locate Button 29
Monitoring 30
How to turn the volume of the monitors up or down 30
How to select an Internal Mix Bus to the monitors and Master Meters 30
How to select an External Source to the monitors and Master Meters 30
How to solo any Speaker Output 30
How to Dim the speakers 31
How to set the Dim level 31
How to select a different speaker set 31
How to fold-down the current Monitor set to a down-mix (mono) 31
How to switch the monitors to a predetermined reference level 31
How to set the reference level for your monitors 31
Fader and Mute etc. Grouping 32
How to find out which channels are grouped 32
How to make a new group 32
How to update the relationship between fader levels of group members 32
How to add/remove members from a group 32
How to make a mute group 33
Templates (Console Setups) 34
How to change to a different SET 34
How to copy a SET from one location to another 34
How to initialise a SET 34
