Mercury Verado 6 Manual de usuario

STORAGE

103

Storage Preparation

The major consideration in preparing your outboard for storage is to

protect it from rust, corrosion, and damage caused by freezing of trapped

water.

The following storage procedures should be followed to prepare your

outboard for out of season storage or prolonged storage (two months or

longer).

! CAUTION

Never start or operate your outboard (even momentarily) without water

circulating through all the cooling water intake holes in the gearcase to

prevent damage to the water pump (running dry) or overheating of the

engine.

FUEL SYSTEM

IMPORTANT: Gasoline containing alcohol (ethanol or methanol) can

cause a formation of acid during storage and can damage the fuel system.

If the gasoline being used contains alcohol, it is advisable to drain as

much of the remaining gasoline as possible from the fuel tank, remote

fuel line, and engine fuel system.

IMPORTANT: This outboard is equipped with a closed fuel system when

the engine is not running. With this closed system, fuel within the engine's

fuel system, other than the fuel tank, will remain stable during normal

storage periods without the addition of fuel treatment stabilizers.

Fill the fuel tank and engine fuel system with treated (stabilized) fuel to

help prevent formation of varnish and gum. Proceed with the following

instructions.

• Portable Fuel Tank ‑ Pour the required amount of Fuel System

Treatment and Stabilizer (follow instructions on container) into fuel

tank. Tip fuel tank back and forth to mix stabilizer with the fuel.

• Permanently Installed Fuel Tank ‑ Pour the required amount of Fuel

System Treatment and Stabilizer (follow instructions on container)

into a separate container and mix with approximately one liter (one

quart) of gasoline. Pour this mixture into fuel tank.

Tube Ref No. Description Where Used Part No.

124

Fuel System

Treatment &

Stabilizer

Fuel tank 802875A1

STORAGE

104

Protecting External Outboard Components

• Touch up any paint nicks. See your dealer for touch‑up paint.

• Spray Quicksilver or Mercury Precision Lubricants Corrosion Guard

on external metal surfaces (except corrosion control anodes).

Tube Ref No. Description Where Used Part No.

120 Corrosion Guard External metal

surfaces

92-802878-5

Protecting Internal Engine Components

IMPORTANT: Refer to Maintenance ‑ Spark Plug Inspection and

Replacement for correct procedure for removing spark plugs.

• Remove pencil coils and spark plugs.

• Spray approximately 30 ml (1 fl. oz.) of Storage Seal Rust Inhibitor

into each spark plug hole.

Tube Ref No. Description Where Used Part No.

119 Storage Seal Rust

Inhibitor Spark plug holes 92-802878-5

• Actuate key/push button start switch to crank the engine through one

start cycle, which will distribute the storage seal throughout the

cylinders.

• Reinstall spark plugs and pencil coils.

Gearcase

• Drain and refill the gearcase lubricant (refer to Maintenance ‑

Gearcase Lubrication).

Positioning Outboard For Storage

Store outboard in an upright (vertical) position to allow water to drain out

of outboard.

! CAUTION

If outboard is stored tilted up in freezing temperature, trapped cooling

water or rain water that may have entered the propeller exhaust outlet

in the gearcase could freeze and cause damage to the outboard.

STORAGE

105

Battery Storage

• Follow the battery manufacturer's instructions for storage and

recharging.

• Remove the battery from the boat and check water level. Recharge

if necessary.

• Store the battery in a cool, dry place.

• Periodically check the water level and recharge the battery during

storage.

Otros manuales para Verado 6

Tabla de contenidos

Otros manuales de Motor fuera de borda de Mercury

Mercury

Mercury OUTBOARD MOTOR Manual de usuario

Mercury

Mercury 225 3.0 Litre Manual de usuario

Mercury

Mercury Marathon - 30 Manual de usuario

Mercury

Mercury VesselView 4 Manual de usuario

Mercury

Mercury OUTBOARD MOTOR Manual de usuario

Mercury

Mercury FourStroke 2.5 Manual de usuario

Mercury

Mercury 225 OptiMax Manual de usuario

Mercury

Mercury 75 Manual de usuario

Mercury

Mercury MERCRUISER Manual de usuario

Mercury

Mercury Freshwater Manual de usuario

Mercury

Mercury 300R HD CMS Mechanical Manual de usuario

Mercury

Mercury 225 HP Manual de usuario

Mercury

Mercury 225 OptiMax Manual de usuario

Mercury

Mercury 40 jet fourstroke Manual de usuario

Mercury

Mercury FourStroke 8 Manual de usuario

Mercury

Mercury 40/50 Series Manual de usuario

Mercury

Mercury 75 Manual de usuario

Mercury

Mercury 90-830296005 Manual de usuario

Mercury

Mercury Xi5 Wireless Edition Manual de usuario

Mercury

Mercury 4C Manual de usuario

Mercury

Mercury X3-40 Manual de usuario

Mercury

Mercury 9.9 Manual de usuario

Mercury

Mercury 5 HP FourStroke Propane Manual de usuario

Mercury

Mercury 200 Optimax Manual de usuario

Manuales populares de Motor fuera de borda de otras marcas

Yamaha

Yamaha VF150 Manual de usuario

Sleipner

Sleipner SEP-IP30 Manual de usuario

Suzuki

Suzuki DF 40 Manual de usuario

SELVA MARINE

SELVA MARINE Corse Manual de usuario

TOHATSU

TOHATSU BFT 250A Manual de usuario

KONRAD

KONRAD Series 600B Manual de usuario

Sleipner

Sleipner E-Vision Electric Thruster E300 Manual de usuario

Suzuki

Suzuki DF40A Manual de usuario

IST

IST 18.BF200D Manual de usuario

Side-Power

Side-Power SP 155 TC i Manual de usuario

Quick

Quick BTR250 Manual de usuario

Yamaha

Yamaha VF90 Manual de usuario

Yamaha

Yamaha D150H Manual de usuario

Yanmar

Yanmar ZT350 series Manual de usuario

MotorGuide

MotorGuide X3-40 Manual de usuario

Yamaha

Yamaha 20D Manual de usuario

Torqeedo

Torqeedo Ultralight 403 Manual de usuario

Vetus

Vetus BOWPRO65 Manual de usuario