Memoq MQ-71 Manual de usuario
Digital Voice Recorder & Pen
Model : MQ-71/MQ-72
Owner’s Manual
Made in Korea
Thank you for purchasing this product. Before use, read this manual and understand its functions for appropriate use.
After reading this manual, be sure to keep it for reference and record your purchasing date and place on the warranty card.
Name of each part......................................3
Caution .......................................................4
Before use (Charging) ................................4
Record........................................................5
Stop recording ............................................5
Play ............................................................6
File auto search..........................................6
Move and play first/last recorded file..........6
Delete file ...................................................6
Move and play for each search mode ........7
Setting Search Mode..................................7
Power off ....................................................8
Check the remainder of the charger...........8
Manager program installation...............9~13
Use as a ball point pen.............................14
How to use manager program............14~16
Specification .............................................17
Warranty policy.........................................17
FCC Caution.............................................18
FCC Note .................................................18
Warranty card...........................................19
Table of contents
3
Name of each part
1. Main unit
2. Wire remote controller
Core of ball point pen
Ink tube part
Rotating part
Main body
Recording switch
Charging indicator lamp
Main body of remote controller
Earphone
Plug Mode button
Stop(Power off) button
Play/Pause button Volume control
Lock switch Previous button
Next button Earphone jack
4
1) We don’t take any responsibility for loss of recording due to use of this product, after sales service and others.
2) We don’t take any responsibility for any claim raised due to use of this product or a third party.
3) Disassembly, modification, impact or use of this product in low or high temperature or humid place may cause malfunction.
4) Save important recording in PC immediately.
This product includes a battery charger. Be sure to charge the product that you purchased before use. Connect USB plug to USB port
on PC, and ø2.5 plug to the earphone jack on the main body to start charging. At this time, PC must be on.
Charging will take about 3 hours (if completely discharged), and if completely charged, about 12 hours available for recording and
about 8 hours available for playing and charging indicator lamp is on during charging and when charging is completed, the lamp is
flickering. While using, if the charger is discharged, it sounds ‘beep’ and the power is off.
In this case, recharge it. Charging status can be checked by the charger indicator icon on the manager window.
** If the charging indicator lamp isn’t on, check if USB cable is properly connected and remove USB cable from the recorder and
reconnect it.
** When not using the product for a long time, the life of the battery will be extended if it is completely charged before keeping.
Caution
Before use (Charging)
5
Move the recording switch ( ) to arrow indicated direction to start recording. Recording
status can be checked while recording by monitoring with earphone. Voice recording can
be set from PC manager to various modes and the recordable time for each model and
mode is as indicated in below table. If the number of recorded file is high, total recording
time will decrease since the memory is used for file management. If the memory is not
sufficient or the number of files is 99, the warning sound (beep sound) rings for 3 seconds
and stop.
Recordable hour for each model (For Recording Mode Installation, see p.16)
Record
If you want to stop recording, move the recording switch ( ) to Stop (Power Off)
position to stop recording. Then, power is off and becomes standby mode.
Stop recording
Model MQ-71 MQ-72
Memory 128MB 256MB
XHQ(Extra High Quality) Approx. 4.5 hours Approx. 9 hours
HQ(High Quality) Approx. 9 hours Approx. 18 hours
LP(Long Play) Approx. 18 hours Approx. 36 hours
6
Deactivate the lock switch of the remote controller and adjust the volume adjuster to Max..
Set the recording switch ( ) to Stop position, and connect the wire remote controller plug to the earphone terminal of the main body
and press Play/Pause [ ] button on the remote controller to play.
Press the button [ ] again to pause and press Stop [ ] button to stop playing.
Use the volume adjuster on the remote controller to adjust the volume.
This is a function that introduces the recorded contents in the file and if you press Play button for 3 seconds in Stop position, first 5
seconds of each file from No. 1 to last file will be played. When the contents you want to listen are played, press Play button shortly to
continue to play the file.
Press Previous [ ] and Next [ ] button for 3 seconds while playing, to move and play first and last recorded file.
Press Stop [ ] button for over 3 seconds in Stop mode, and it sounds beep and the contents to check will be played.
If the content is what you want to delete, shortly press Stop [ ] button to delete it and if not, press other buttons to cancel.
Play
File auto search
Move and play first/last recorded file
Delete file
StopRecord Pla
y
/Pause
7
Press Previous[ ] and Next[ ] button shortly while playing, and move to previous and next recording depending on the search
mode setting(Move file/Search 1/Search 2) and play.
Use the search function properly to search the content of file.
If the mode is set to “Move file”, whenever you press Previous and Next button, you can move to previous file and next file.
If it is set to “Search 1”, each time you press Next button, it move about 20 seconds forward and about 20 seconds backward to
search the recorded contents more precisely.
If the remaining time on the end of currently moving file is less than 20 seconds, it moves to the first part of next file.
For “Search 2”, when pressing Previous and Next button, it moves to about 10 minutes forward and about 10 minutes backward,
enabling to randomly search the recorded contents.
Press Mode (M) button on the remote controller while playing, beep sound comes out according to the mode and the search mode
rotates in below order and becomes switched.
Move and play for each search mode
Setting Search Mode
Operation Mode selection Beep Previous ( ) button Next ( ) button
Move file Beep Move to previous file Move to next file
Search 1 Beep beep Move to about 20 sec. ago Move to about 20 sec. later
Search 2 Beep beep beep Move to about 10 minutes ago Move to about 10 min. later
8
While recording, switch the recording switch to Stop position to turn off the power and while playing, press Stop[ ] button on the
remote controller or remove the plug to turn off the power.
This unit contains a charger.
The life of the charger depends on how you use it.
When connecting the plug of the remote controller to the earphone jack of the voice recorder with the recording switch in Stop
position, the charging indicator lamp indicates the remainder of the charger.
Power off
Check the remainder of the charger
Remainder of charger Indication
About over 70% LED on for 5 sec.
About 30% ~ 70% LED flickering for 5 sec.
About below 30% No charging indicator lamp
9
Caution
Before installing manager program, be sure to leave the voice recorder in Stop position.
Or damage may occur to the recorded file.
(1)OS : Over Windows 2000
(2)RAM capacity : Over 128MB
(3)Hard disk margin capacity : Over 1GB
Installing manager program enables you to save the recorded contents by
USB port to PC and to move and save the saved contents to the voice recorder.
Manager program installation
Computer specification
1) Insert Manager program CD into CD-ROM of
your PC.
2) Connect USB cable to USB port of your PC
and the earphone terminal of the voice
recorder(MemoQ)
10
3) When standing by, the hardware wizard window appears on
the computer screen. Select “Install from a list or specific
location [Advanced]” as shown in the picture and click
“Next >” button.
4) Select CD-ROM drive (CD inserted drive) as shown in the
picture and click “Browse” button.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Grabadora de voz de Memoq
