Story Teller LP User Guide rev 2.1.docx Page 2 of 12
Hardware Requirements:
A Windows PC/Mac (Intel only) with at least 1 available USB port
The SLS USB-to-mini-USB cable
Software Requirements:
Operating System: Windows XP or higher / Mac OS X 10.5 or higher
(Intel only)
Microsoft .NET Framework version 2 or higher
Microsoft .NET Framework is included by default in Windows Vista
and Windows 7. However if your XP system does not yet have the
.NET Framework installed, you can download it here from Microsoft:
www.microsoft.com/net
Connecting your player to a PC
When connecting your Story Teller player to your PC using the SLS USB
cable, the PC will recognize the player as a removable disk or mass
storage device. The Windows operating system will assign a Disk Drive
letter to each connected player. Each player with its Disk Drive letter will
appear in the SLS window.
Why do I need to use the SLS USB cable?
In order to protect the audio content loaded on to the player, a PC will
not recognize the player when the player is connected using a standard
USB cable. The player’s memory containing the audio files can only be
accessed using the SLS USB cable.
Tip! You can charge your player battery using a standard USB
cable or the SLS USB cable.
Can I program multiple players using a USB expansion hub?
Yes, you can program multiple players simultaneously using a USB
expansion HUB. We recommend using USB 2.0 (or higher) powered HUBs,
directly connected to the computer (not daisy-chained), and with up to 7
players connected per HUB.
Important: When connecting players using a USB HUB, each player
must have its own SLS USB cable.
Refer to the illustration in Figure 1.
