Megatron UP-PN-II Manual de usuario
1 UP-PN-II v0.8
8 needles printer mechanism
Easy loading of paper
Powered by battery or mains
Interfaces IrDA IrLPT & IrCOMM 3-wire raw
RS232C from 110 to 19200 baud
USB 2.0
24 and 40 characters per line
Programmable text which can be printed on internal timer or by
interface
Remote of an external instrument (RS232 or timer )
Optical detection of paper end
Can print double ply paper.
Perfect for process control
English – version 0.8
UP-PN-II
Portable Dot Matrix Printer
User Manual
UP-PN-II v0.8 2
Table of contents
Overview ..............................................................................................3
Chapter 1 specifications .....................................................................4
1.1 References .........................................................................4
1.2 Printing features ..................................................................4
1.3 Roll of paper .......................................................................4
1.4 Ribbon .................................................................................4
1.5 Print commands ..................................................................5
1.6 Interface ..............................................................................5
1.7 Power supply ......................................................................6
1.8 Power up and auto power off .............................................7
1.9 Environmental specifications .............................................7
1.10 Dimensions .......................................................................7
1.11 Weight ...............................................................................7
Chapter 2 Installation and operating .................................................8
2.1 Installation ...........................................................................8
2.2 Connecting the power .........................................................8
2.3 Loading of paper .................................................................9
2.4 Replacement of ink ribbon ...............................................10
2.5 Selecting the interface ......................................................10
2.6 Interface connection .........................................................11
2.7 Play with buttons & leds ...................................................13
Chapter 3 Configuration enu ........................................................14
Menu parameters ....................................................................17
Chapter 4 Characters & Co ands ...............................................18
4.1 Driver ................................................................................18
4.2 Character set ....................................................................19
4.3 Control codes PCL Raw ...................................................19
4.4 Control codes ESC/P 9 PINS ...........................................20
4.5 Control code ESC/P Basic ................................................20
4.5.1 Character set control codes ........................................22
4.5.2 Enhancement control codes .......................................22
4.5.3 Horizontal spacing .......................................................23
4.5.4 Vertical spacing ...........................................................23
4.5.5 Graphics ......................................................................24
4.5.6 Logo & Messages .......................................................26
4.5.7 Special Commands .....................................................28
4.5.8 Optional clock not available .......................................29
4.5.9 Configuration commands ............................................30
4.5.10 System Commands ...................................................31
3 UP-PN-II v0.8
Overview
UP-PN-II portable eight dot matrix printer features as following
Structure for easy paper loading
Powered by mains or battery pack for quick replacing and portability
IrDA infrared interface for easy interfacing and communication wireless
(IrLPT & IrCOMM 3-wire Raw classes)
Serial RS232C interface from 110 to 19200 baud
(can work at 9600 baud simultaneously with IrDA)
Interface USB 2.0
2 characters fonts allowing 24 and 40 characters per line
Optical detection of paper end
Copy ability; it can provide an original and a copy
Pre-programmed messages activated by interface or timer
Query on external RS232 peripheral on interface or timer
UP-PN-II printer is suitable for application of mobile instrument or such as PDA,
POS, devices, etc...
for application of mobile instrument,
with IrDA wireless instrument or PDA, ...
with computer, POS, ...
In stand alone mode with RS232 measurement devices (Multimeter,
Sliding caliper, etc)
Thanks to its dot matrix technology, it is perfectly adapted to process controls
where ticket must be stored.
Product and documentation can be modified
without notice .
Chapter 5 Annex ................................................................................32
5.1 Battery version ................................................................. 32
5.1.1 Battery charge ............................................................ 32
5.2 Main version ..................................................................... 32
5.3 Cables & accessories ...................................................... 33
5.4 Character set ................................................................... 34
UP-PN-II v0.8 4
1.2 Printing features
•Printing method Dot matrix printing
•Copy ability 1(original) +1
•Model UP-PN-II uses an EPSON M-192 printing mechanism.
The main characteristics are detailed in the following table
•With a font in matrix 6×10, 40 characters by line are available.
•With a font in matrix 10×10, 24 characters by line are available.
Other fonts are downloadable allowing other character sets or sizes.
1.3 Paper roll
•Normal paper roll, max Outer Ø 50mm, Inner Ø 12.5mm
•Paper width 57.5 ± 0.5mm
•Paper thickness 0.065µm, 53~64g/m
2
1.4 Ribbon
•MDE-250-V cassette, purple, life 100 000 characters.
•MDE-250-N cassette, black, life 100 000 characters.
Model
Density
(dots/line)
Dot size
H x V
(mm)
Characters
per line
6×10
(char)
Character
dimension
6x10 (mm)
Characters
per line
10×10
(char)
Character
dimension
10x10 (mm)
Printing
speed
(line/s)
Paper feed
speed
(lines/s)
Reliability
MCBF
(lines)
UP-PNII
240 0,2 x 0,37 40 1,2 × 3,7 24 2 × 3,7 1.5 3.0 1 000 000
Chapter 1 Features
1.1 References
Reference : UP-PN-II -
X
X
X
The reference will be set by replacing
each "x" character by the letter
corresponding to your needs.
Example: UP-PN-
II
- UI
W
IRELESS
I
NTERFACE
- No Wireless interface
I IrDA interface
P
OWER
S
UPPLY
On battery with ext. mains charger B
Mains (external mains supply) S
W
IRED
I
NTERFACE
U USB 2.0
V Serial RS232C
5 UP-PN-II v0.8
1.5 Printing co ands
The UP-PN-II provides ESC/POS (ESC/P 9 pins and ESC/P Basic) commands
and a simple PCL compatibility (raw graphic).
•Two fonts are included providing 224 IBMII characters IBMII in different
matrix. On request other fonts can be downloaded.
•ESC/P commands provide following functions
Character and graphic printing, enlarge characters, underline, user defined
characters, formatting, hexadecimal dumping.
•PCL commands allow raw graphic which are suitable for most PDA and
handled computer
1.6 Interface
UP-PNII exists in several versions
with a serial RS232 interface
with a serial RS232 interface and an infrared IrDA interface
with a serial USB 2.0 interface
with a serial USB 2.0 interface and an infrared IrDA interface
•Serial RS-232
Baud 110 to 19200 Baud (9600 at delivery)
Handshake RTS or XON/XOFF
Format 7 or 8 bits ,
parity no, even ou odd,
1 or 2 stop bits
Connector RJ-12 6 pins
Signal level EIA ±3 ~±15V
•Infrared port IrDA
Classes IrLPT and IrCOMM-3 wire Raw
Distance 1 m (max.)
Angle 30°
Note USB 2.0 can operate in the same time as the Irda.
RS232 can operate in the same time as the Irda. But in this case, the
baudrate for the RS232 is 9600 Bd
•USB 2.0
Printer class (class 7)
Full Speed
B typ USB Connector
UP-PN-II v0.8 6
1.7 Power supply
Two kind of power supply are available
UP-PN-II-B Battery and mains charger
•Battery Pack 6VDC 1500mAh.
•DC power plug 9~12VDC / 300mA
UP-PN-II-S operates on mains 100-240 VAC
•DC power plug 6VDC/5A
7 UP-PN-II v0.8
1.8 Power on and auto power off
Push the « on » button for power on.
The shut off can be
•Auto after a programmable delay of inactivity (1 up to 15 minutes)
•Manual after the « on » button is pressed for 5 seconds.
1.9 Environ ental conditions
•Temperature 0~50°C
•Humidity 10~80% RH
1.10 Size
•153(L) × 116(W) × 65(H) mm
1.11 Weight
530g (without the paper roll)
UP-PN-II v0.8 8
Chapter 2 Installation and Operation
2.1 Installation
Overview of the UP-PN-II dot matrix printer is shown figure 2-1
2.2 Connecting the power
Mains version: the printer is not equipped with a battery
A DC power plug is delivered (6VDC/5A).
Battery version: A rechargeable battery is delivered with the printer with a
mains charger. When the charger is connected, the charge begins for 14 hours.
After the first use, we recommend to charge the battery.
Installation of the battery clip the battery in the case below the printer.
You can hear a sound.
Removing the battery press on the plastic bar which is near the battery.
(fig 2.2)
An external charger can be use for fast charging.
Shut off the printer and remove the battery pack
then connect the battery pack to the external
charger.
Warning: The printer can't work if a battery is
not connected.
Figure 2-1 overview of UP-PNII
Bottom case
IrDA window
Output of
paper
ON/OFF
Button
LF button (line
feed)
9 UP-PN-II v0.8
2.3 Loading of paper
Follow these steps
1 Open the case (Fig 2.3 a & b)
2 Place the roll of paper in its clips. Insert the paper in the slot and press « LF »
button until the paper outputs.
3 Close the case (fig 2.3 d)
Battery
Release Bar
Connectors
DC power jack
Serial RJ12
Battery place
Figure 2-2 battery
- +
Figure 2-3 loading of paper
(a) (b)
Ink ribbon
(c) (d)
Paper clips
UP-PN-II v0.8 10
2.4 Replace ent of ink ribbon
The ink ribbon must be replaced when the printing becomes too light. Follow
these steps
1 Open the case
2 Push on the ribbon where it is written. (fig 2.4) and remove the ribbon
3 Place a new one instead. The paper must be inside the ribbon. Turn the little
wheel on the ribbon until the ribbon is tight.
4 Close the case
2.5 Selecting the interface
Use the configuration menu for select IrDA, RS232 or USB 2.0.
1) Serial Interface RS-232C
Set the menu « Printer -> Interface » on « serial »
The whole set of parameter must match the host.
2) Infrared IrDA
Set the menu « Printer -> Interface » on « IrDA/Ser9K6 » or « IrDA/USB »
The baud are automatically adapted to the host.
The protocol supports IrLPT et IrCOMM-3 wire Raw
RS232 baudrate is limited to 9600 Baud
3) USB Interface
Set the menu « Printer -> Interface » on « IrDA/USB ».
Figure 2-4 Ink ribbon
Tabla de contenidos
Otros manuales de Impresora de Megatron
Megatron
Megatron PORTI-T380 Manual de usuario
Megatron
Megatron WSP-i350 Manual de usuario
Megatron
Megatron WSP-i250 Manual de usuario
Megatron
Megatron MTH-2500 Manual de usuario
Megatron
Megatron TP UP-NH Manual de usuario
Megatron
Megatron GeBE-COMPACT Plus Manual de usuario
Megatron
Megatron MRSi-x200 Manual de usuario
Megatron
Megatron PORTI-T380 Manual de usuario
Megatron
Megatron WSP-R240 Manual de usuario
Megatron
Megatron WSP-R241 Manual de usuario
