MEGATEK T4 Pro Manual de usuario
USER’S MANUAL
Stereo Speakers
T4 Pro
Before using your new product, please read
these instructions to prevent any damage.
www.megatekelec.com
Safety Instructions
• Avoid dropping.
• Do not disassemble.
• Do not submerge in water.
Specifications
• Micro USB socket: DC 5V 1A
• Audio output: 2 x 6W RMS
• Li-polymer batteries: 2 x 1000 mAh
• Charging time: 3-4 hours
• Size: 3.9 x 2.8 inches
• Bluetooth: Version 4.2
• Pairing name: Megatek T4 Pro
• Bluetooth wireless range: 150 feet (line of sight)
• TWS wireless range: 15 feet (line of sight)
Pairing the Speakers for True Wireless Stereo
These speakers can be used as a pair, or individually.To
use individually in different rooms, simply connect both
speakers to different Bluetooth devices. In order to use the
speakers as a pair in true wireless stereo (TWS) mode,
follow the TWS pairing process in the user manual.
Important Notice:
Please fully charge your Bluetooth speakers before first
use. Your new speakers may arrive with their built-in
batteries low, and low batteries may cause sound
distortion, unstable connection etc.
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not use any corrosive cleaner/oil to clean.
01
EN
www.megatekelec.com
Package Contents
2 x T4 Pro Speakers 1 x User’s Manual
1 x Micro-USB
Charging Cable
1 x 3.5mm
Audio Cable
02
EN
www.megatekelec.com
Product Overview
Front View
16
25
34
Press and hold:
• Power on/off.
1
Press and release:
• Switch LED ligth modes / Turn off LED lights.
Press and hold:
• Skip back (Bluetooth mode).
2
• Decrease the volume progressively (AUX mode).
Press and release:
• Decrease the volume in steps.
Press and hold:
3
Press and release:
• Play / Pause / Answer call / End call (Bluetooth mode).
• Reject call / End call (Bluetooth mode).
Note:
Not available in AUX mode.
• Mute / Unmute (AUX mode).
03
EN
www.megatekelec.com
4LED Indicator
• Solid Red: Charging.
• Off: Fully charged / Power off.
• Flashing blue slowly: Bluetooth paired (TWS mode).
• Solid blue:
Single-speaker mode: Bluetooth paired.
TWS mode: Native speaker.
• Solid green: Aux-in mode.
Press and hold:
• Skip forward (Bluetooth mode).
Press and release:
• Increase the volume in steps.
5
• Increase the volume progressively (AUX mode).
Press and hold:
• Unpair your current Bluetooth device and search for
new devices. Press and hold it again to connect
back to the last paired Bluetooth device.
6
Press and release:
• Operate either of the two speakers, it will search for
the other for TWS pairing, a tone will sound when
pairing is completed. When TWS paired, both speakers
will work together as one 2.0 wireless speaker system,
with only one Bluetooth pairing ID ("Megatek T4 Pro")
for pairing with external Bluetooth device.
Press it again to disconnect TWS pairing.
• Flashing blue quickly:
Searching for Bluetooth devices.
04
EN
www.megatekelec.com
2
3
1
Back view
• DC 5V Charging Port.
2
• 3.5 mm Aux Input.
3
• Built-in speakerphone for hands-free calls.
1Speakerphone
Positioning the Speakers
It is important that you consider carefully in advance
where your Bluetooth Speakers will be situated and
make sure that they are:
• On a flat and stable surface.
• At least 1 meter away from other electrical appliances
to avoid interference.
• Where they will be in range of the connected or ‘paired’
Bluetooth device (e.g. iPhone/Android phone/computer),
which is about 150 feet or less in line of sight.
0-150f
Megatek T4 Pro
05
EN
www.megatekelec.com
Using Your Speakers
You can use both speakers separately as two normal
Bluetooth speakers, or pair them together as one 2.0
wireless stereo speaker system with its built-in True
Wireless Stereo (TWS) technology.
OR
Megatek T4 Pro
Megatek T4 Pro
Megatek T4 Pro
Megatek T4 Pro
Power On
Press and hold the Power button for 2 seconds to power
on - the LED indicator will flash blue with an audible alert.
Flashing blue
Flashing blue Power On.
2
06
EN
www.megatekelec.com
Press and hold the Power button for 2 seconds to power
off - the LED indicator will turn off with an audible alert.
Power Off
2
TWS Pairing
For first time TWS pairing, turn on both the speakers
and wait for about 30 seconds, they will pair
automatically via TWS when they are within the range
of 15 feet or less, line of sight, a tone will sound once
TWS pairing is completed.
Note:
• When the two speakers are TWS paired, press and hold
the Power button on either of the speakers for 2 seconds
and then both speakers will switch off.
• If the Bluetooth speakers don't receive an audio signal
for approximately 15 minutes they will power off
automatically.
Adjusting the volume
• Press and release to decrease the volume in steps.
• Press and hold to progressively decrease the
volume (AUX mode).
• Press and release to increase the volume in steps.
• Press and hold to progressively increase the
volume (AUX mode).
Note: You will hear an audible alert when the minimum
or maximum volume level has been reached.
07
EN
www.megatekelec.com
POWER ON
22
Pairing/
Unpairing
X1
Now that you have paired both the speakers via TWS
for the first time, they will pair via TWS immediately
next time when both power on and within TWS range.
Or you can press and release the button on either
of the two speakers to manually start TWS pairing or
disconnect them.
TWS PAIRED
LEFT RIGHT
Flashing Blue
Quickly Solid Blue
In TWS mode, one speaker will work as host speaker
and left channel with LED indicator flashing blue, and
the other as right channel with LED indicator solid
blue.
Host Speaker Native Speaker
Flashing blue quickly Host speaker searching
for Bluetooth device.
Solid blue Native speaker with TWS
paired.
TWS
08
EN
www.megatekelec.com
To answer/end a call; Press the button on the host
speaker (Bluetooth mode).
Hands-Free Calling
Megatek T4 Pro
Megatek T4 Pro
0-150f
Flashing blue slowly Host speaker with
Bluetooth paired.
Solid blue Native speaker (TWS
mode).
Bluetooth paired (single
speaker mode).
Connect to a Bluetooth Device
Turn on both speakers, enter Bluetooth mode on your
Bluetooth enabled device and search for "Megatek T4
Pro" and select it to pair, a tone will sound once the
pairing is completed. When paired, play music on your
connected device.
The above pairing processes also apply to one single
speaker being used separately.
Note: TWS pairing is not available when both speakers
have already paired with Bluetooth devices, disconnect
at least one speaker before TWS pairing.
Now that you have paired your device with the Bluetooth
speakers, it will automatically connect to them when it is
within range of 150 feet or less, line of sight.
Note: You can press and hold the button to unpair
your current device and search for new devices.
09
EN
www.megatekelec.com
Tabla de contenidos
Otros manuales de Oradores de MEGATEK
