megabyte mHand H3-B Manual de usuario
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016
Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.com
(This user manual / product specification is subjected to be changed without prior notice) P.1
mHand H3-B User Manual Rev. 3.0
Model: mHand H3-B
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016
Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.com
(This user manual / product specification is subjected to be changed without prior notice) P.2
Table of Content
FCC statement.....................................................................................................3
CE statement.......................................................................................................3
Chapter 1 Introduction of mHand H3-B.............................................................4
1.1 Overview of mHand H3-B .............................................................4
1.2 Ports Description...........................................................................5
1.3 Buttons in mHand H3-B ................................................................6
1.4 Indicators LEDs in mHand H3-B ...................................................8
1.5 Specification:...............................................................................10
Chapter 2 Installation of mHand H3-B.............................................................12
2.1 Start-up Procedures of H3-B .......................................................12
2.2 Environmental Requirements......................................................15
2.3 Caution........................................................................................16
Chapter 3 Demonstration of RFID Applications .............................................17
3.1 Creating RFID Application with mHand H3-B..............................17
Chapter 4 Regulatory Information ...................................................................18
4.1 Federal Communications Commission (FCC) Compliance .........18
4.2 CE Compliance ...........................................................................19
Chapter 5 Disclaimer Notice ............................................................................20
Chapter 6 Warranty...........................................................................................21
Chapter 7 Support.............................................................................................22
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016
Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.com
(This user manual / product specification is subjected to be changed without prior notice) P.3
FCC statement
FCC NOTICE:
To comply with FCC part 15 rules in the United States, the system must be
professionally installed to ensure compliance with the Part 15 certification. It is
the responsibility of the operator and professional installer to ensure that only
certified systems are deployed in the United States.
The use of the system in any other combination (such as co-located antennas
transmitting the same information) is expressly forbidden.
CE statement
CE NOTICE:
The CE Mark applies to products regulated by certain European health, safety
and environmental protection legislation. The CE Mark is obligatory for
products it applies to: the manufacturer affixes the marking in order to be
allowed to sell his product in the European market.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016
Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.com
(This user manual / product specification is subjected to be changed without prior notice) P.4
Chapter 1 Introduction of mHand H3-B
1.1 Overview of mHand H3-B:
mHand H3-B is an UHF EPC C1G2 mobile RFID handheld with Bluetooth
technology, the plug & play Bluetooth connectivity increases the flexible on the
RFID stock-take through Bluetooth enabled mobile device. Lightweight and OS
independent, the ergonomic design with enhanced reading sensitivity.
•The mHand H3-B Intelligent RFID Reader supports protocols, UHF
CLASS 1 GEN2 EPC C1G2/ISO 18000-6C, 902-928 MHz RFID
frequency band in United States.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016
Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.com
(This user manual / product specification is subjected to be changed without prior notice) P.5
1.2 Ports Description
Input port of the mHand H3-B:
Items no. Name Description
1 Micro USB jack 5V/2A dc power supply input
(1) Battery charging port
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016
Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.com
(This user manual / product specification is subjected to be changed without prior notice) P.6
1.3 Buttons in mHand H3-B
(
3
)
Battery
removable button
(
2
)
Power O
N
B
utton
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016
Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.com
(This user manual / product specification is subjected to be changed without prior notice) P.7
(
5
)
Read Button
(
4
)
Reading Lock
Key
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016
Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.com
(This user manual / product specification is subjected to be changed without prior notice) P.8
Items no. Name Description
2 Power ON Button Press to switch the device on
3 Battery removable button Press to unlock battery
4 Reading Lock Switch on to retain reading function
5 Read Button Press to start reading
6 Psensor Key The Psensor turn on when covering on it. Then start
reading function
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016
Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.com
(This user manual / product specification is subjected to be changed without prior notice) P.9
1.4 Indicators LEDs in mHand H3-B
(10) Red LED indicates battery charging
(6) Blue LED indicates
Bluetooth is ON
(7), (8)
The LEDs show the read
button is pressed in operation
(9) Orange LED
indicates low battery
(11) White LED indicates
the device is ready but
Bluetooth is not connected
(12) Blue LED indicates the BT
of the device is connected
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016
Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.com
(This user manual / product specification is subjected to be changed without prior notice) P.10
The mHand H3-B has different LEDs to indicate the reader status.
Items no. Name Description
6 Blue and white LED
(LED3)
Blue LED On means the BT is connected;
White LED On means the BT is turn on and ready to
use
7 Blue LED (LED 2) The read button is pressed in operation
8 Blue LED (LED 1)
9 Orange LED Low battery indicator
10 Red and Blue LED Battery charging; Blue is full charged
11 White LED (Power On) Bluetooth is ready but not connected
12 Blue LED (BT ON) Bluetooth is connected
Tabla de contenidos
Otros manuales de Otro de megabyte
