MEFE CAT 206 PTR Guía
USER'S MANUAL AND MAINTENANCE
TABLE OF CONTENTS
1. GENERAL INFORMATION ....................................................................................... 4
1.1 INFORMATION ABOUT THE MANUFACTURER ................................................. 4
1.2 BRANDING ....................................................................................................... 4
1.3 CE DECLARATION OF CONFORMITY ................................................................. 5
1.5 SECURITY PROCEDURES ................................................................................... 6
1.5.1 WARNINGS FOR OPERATOR SAFETY ............................................................. 6
2. GENERAL DESCRIPTION ......................................................................................... 7
3. HOW TO USE THE MANUAL ................................................................................... 8
4. TECHNICAL DATA .................................................................................................. 10
4.1 MAIN DIMENSIONS ......................................................................................... 10
4.2 CHARACTERISTIC DATA ...................... : .......................................................... 10
5. INSTALLATION ....................................................................................................... 11
6. CLEANING ............................................................................................................. 12
7. DEMOLITION AND DISPOSAL ................................................................................ 12
8. FUNCTION AND USE .............................................................................................. 12
8. 1 EXPECTED USE ................................................................................................. 12
8.2 UNEXPECTED USE ............................................................................................ 12
8.3 SIGNALS ........................................................................................................... 13
8.4 SAFETY REGULATIONS ..................................................................................... 14
8.5 RESIDUAL RISKS ............................................................................................... 15
8.6 INDIVIDUAL PROTECION DEVICE ..................................................................... 15
9. USE ........................................................................................................................ 16
10. MAINTENANCE ...................................................................................................... 17
11. SPARE PARTS ......................................................................................................... 17
1.
.
GENERAL INFORMATION
1.1INFORMATION ABOUT THE MANUFACTURER
1.2 MARKING
The device is manufactured in compliance with the necessary and applicable European
Community directives at the time when it was put on the market , in particular the directive
2006/42/CE.
We apply the proper identification plate that includes specific data, EC mark which grants
the correspondence of the product to the Directives mentioned in the attached EC
declaration of conformity.
The information written here, will be given to our technical assistance department in order to send spare
parts or for any information regarding the machine.
O
It is prohibited for the user to remove, alter or damage the identification plate.
4
Mitchell Engineering Food Equipment Pty Ltd
23-25 Storie Street
Clontarf QLD 4019
www.mefe.com.au | www.sanitise.au
email: [email protected]
Ph: 1800 669 006
1.5 SECURITY PROCEDURES WARNINGS FOR
OPERATOR SAFETY
Before starting to use the machine, the operators must be perfectly aware o the
position and function of all of the controls in the instruction manual.
All of the maintenance that is carried out whether it is ordinary or extraordinary
must be carried out by specialized operators that are experts on the subject
Be careful not to come into contact with the lifting hook.
Don't place hands on the moving devices
Don't use the machine for something different that what is indicated in the manual. Don't
use products that are different from what is indicated. Improper use of the machine
can be dangerous for personnel that use it and can damage the machine as well. Before
using it for something different from what is allowed contact the manufacturer for
authorization ..
To avoid danger of entanglement in the machine's moving parts, don't come close with
-
Long hair
-
bracelets
-
chains
-
rings
-
ties
-
loose fitting clothes
None of the operators can be under the influence of sedatives, drugs or alcohol while
on the job.
m
Always Keep the user's manual near the place where the machine is being used.
6
1.3
EC DECLARATION OF CONFORMITY
CE DECLARATION OF CONFORMITY
ACCORDING TO THE DIRECTIV 2006/42/CE -Attachment II A
The undersigned manufacturer:
Mitchell Engineering Food Equipment
23 Storie Street Clontarf QLD 4019
1800 669 006 | [email protected]
Declares and takes full responsibility that the machine:
NAME ....................................................
PIG NAIL REMOVER
MODEL ..................................................
CAT 206 PTR
Conforms with the following community directives:
2006/42/CE
Machine directive
The following standards have been applied:
EN 12100
:
.201.0 EN
ISO 983
:
2010 EN
349.
:
2008
Machine Security General Rules
Pneumatic
Minimum spaces to avoid crushing
Person authorized for arranging the Technical File:
5
Mitchell Engineering Food Equipment
23 Storie Street Clontarf QLD 4019
1800 669 006 | [email protected]
2. GENERAL DESCRIPTION
1
4
1.
Connection hook
2.
Main body
3.
Removing hooks
4.
Central stop
5.
handle
6.
starting control
7.
Approval control for starting
7
2
3
5
67
3. HOW TO USE THE MANUAL
O
Read this manual carefully before proceeding to use the machine.
This manual aims to provide the user all of the necessary information so that they can not only use the
machine correctly, but also to run it more independently and safely.
It includes information regarding technical aspects, operation, downtime, maintenance, spare parts and
safety.
Before carrying out any operation on the machine, the operators and the qualified technicians must read
the instructions carefully that are in this manual..
In case there are doubts on how to interpret the instructions, contact our office to have necessary
clarifications.
W
This manual is an integral part of the machine, and the buyer must store it
carefully, it must be positioned in the immediate vicinity of the machine, inside a
special container and above all, away from liquids or anything else that can
compromise its condition or readability
In case it deteriorates the manufacturer would be happy to send another copy. If that occurs
contact the technical department and give them the data stamped on the identification plate (see
chapter on machine identification). The manual should be given to a new user if it changes hands.
The content of this manual conforms with the 2006/42/CE directive and it was written following the guide
lines of the UNI 10893-2000 regulation.
This manual is 18 pages long including the cover.
The Information and drawings are provided to give an example: the manufacturer having a policy of
constantly developing and updating the product, can make changes without warning. It's
prohibited to distribute, edit or use the manual for one's own use.
8
While drafting the manual we chose to use
very
few, but clear pictograms to bring to one's
attention in order to make it easier and quicker to find.
m
9
The operations that can be potentially dangerous for the operators are
indicated with this symbol
These operations could cause minor or serious physical injury
The operations where it's necessary to pay close attention are indicated with this
symbol.
These operations must be carried out correctly in order not to damage anything or the
surrounding environment. In addition this symbol gives information which needs to
be read carefully
The operations that indicate that the user must read the user's and
maintenance manual carefully are indicated with this symbol.
@
200
4. TECHNICAL DATA
4.1 MAIN DIMENSIONS
4.2 CHARACTERSTIC DATA
Weight _______________ 4.5 kg
Construction material
Pressure of pneumatic system ________ 6 bar
________
10
STAINLESS STEEL AISI 304
5. INSTALLATION
1
1.
Connect the hose of compressed air to the quick connection
2.
Connect the ma chine to the balancer using the proper ring
11
Tabla de contenidos
Otros manuales de Equipos comerciales para alimentos de MEFE
