5
3. Connect Pilot Plus CPAP Battery to your CPAP Device using the
correct output cable that came with your Pilot Plus battery.
4. Toggle power switch on Pilot Plus to ON and immediately
afterward toggle power switch on Co-Pilot to ON.
5. The Co-Pilot and Pilot Plus system will now provide power to
your PAP device. Refer to the instructions that came with your
PAP device for instructions on how to begin therapy.
Charging the Co-Pilot as an Uninterruptible Power
Supply (Backup Battery)
The Pilot Plus and Co-Pilot can both be charged at the same time
using a single AC adapter. Connect the appropriate AC adapter to
the CHARGE port of the Co-Pilot. Ensure that the power switch of
the Co-Pilot is toggled to ON.The power switch on the Pilot Plus
can be toggled to either ON or OFF.
Note: In this configuration the Pilot Plus will charge first, the Co-
Pilot will not begin charging until the Pilot Plus has been fully
charged.
Important: The power switch of the Co-Pilot must be ON for
power to be transmitted to the Pilot Plus.
Note: The Pilot-12 Plus can only be used with the AC adapter
included with the battery. Use of other third-party AC adapters
may result in the Pilot-12 Plus emitting an error code.
Note: The Pilot-24 Plus is designed to use the AC adapter that is
