Mede8er MED500X Manual de usuario
High Definition Multimedia Player
MED500X
User Manual
(Based on Firmware v3.0.4)
TM
Page1
INDEX
page 1
page 2
page 3
page 4
page 5
page 6
page 7
page 8
page 9
page10
page11
page12
page13
page14
page15
page16
page17
page18
page19
page20
page21
page22
page23
page24
page25
page26
page27
page28
page29
page30
page31
page32
Index
Introduction
General Overview
Installing a Hard Drive
Connections
Connections continued
TV Output Settings
Formatting the Hard Drive
Remote Functionality
Home Network Samba Server
Wired Network Connection and Setup
Wireless Network Setup / Firmware Update
Media Library
Media Library Music Player
Cover Art Preview
Play Folder / Play from Cover Art / Watched Indicator
Folder / System Lock
File / Folder Jump to
Playlists
Time Bar Jump
Time Bar FF/RW - Goto Screen
Screen Calibration
Subtitles
File Manager
File Manager -Detail
File Manager - Detail Continued
Internet Radio
NFS (Network File System)
Video Wall
Video Wall Continued
Video Wall Continued
Icon Table
Thank you for purchasing the Mede8er Multimedia Player.
Warranty
Mede8er products carry a 24 month from date of purchase warranty. In the event of warranty service please
provide proof of purchase. Return your product to the store that it was purchased from or return it directly to
Sanji Electronics (Pty) Ltd 106, 16th Rd Midrand, Gauteng, South Africa.
Warranty does not cover damage by
a) Lightning or over voltage
b) Water damage or liquid spill
c) Misuse or abuse
d) User tampering
e) Using non Mede8er approved Firmware
Sanji Electronics is not responsible for any loss of data irrespective of the cause.
Important Safety Instructions
· Read these instructions for all components before using this product.
· Do not use this apparatus near water or moisture. Do not use this product near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, near a swimming pool, or anywhere else that water or
moisture are present.
· Clean only with a soft dry cloth and as directed by the manufacturer. Unplug this product from the wall
outlet before cleaning.
· Do not block any ventilation openings. Install in accordance with the manufacturer instructions. To
ensure reliable operation of the product and to protect it from overheating, put the product in a position
and location that will not interfere with its proper ventilation. For example, do not place the product on
a bed, sofa, or similar surface that may block the ventilation openings. Do not put it in a built-in system,
such as a bookcase or a cabinet that may keep air from flowing through its ventilation openings.
· Do not install near any heat sources, such as radiators, heat registers, stoves or other apparatus that
produce heat.
· Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
· Only use attachments or accessories specified by the manufacturer.
· Unplug this apparatus during lightning storms or when unused for long periods of time to prevent
damage to this product.
Refer all servicing to qualified service personnel
The MED500X is the latest generation multimedia player specially developed by Sanji for today’s demanding
media enthusiast. The Mede8er has been designed for good solid media playback from a hard drive, USB
device, SD Card, Internet or Local Network source. The User Interface is neat and intuitive without being
complicated. Sanji has more than achieved their design goals by offering a media player that supports most
of the popular media formats at a very affordable price.
Please check the Mede8er forum for the latest user guide. www.mede8erforum.com
Page2
Up Down Left Right Enter Return Stop On/OffTV Out
GENERAL OVERVIEW
Component Video
Out
DC - 12Volt 3 Amp input
HDMI Connector
RJ45 - Lan connector
Coax Digital Audio Out
Optical Audio Out
Cooling Fan
Composite Video Out
Analogue Audio Out
LR
SD Card
USB Host
USB Slave
Status Led
Page3
Page4
INSTALLING A HARD DRIVE
a) b)
c)
Make sure that the DC cable is unplugged.
cover screws x and y. Lift the hard drive cover and remove it, place it on a flat surface with the mounting
tabs facing upright. Fit a compatible SATA hard drive into place with the label facing upwards and the
connectors facing the side with the air vents. Secure the hard drive with the four screws provided.
Connect the hard drive power connector and the red SATA data connector from the player to the hard drive
diagram c. Re fit the hard drive cover into the Mede8er body and tighten the two securing screws x and y.
To reduce hard drive vibration noise you can use the supplied Neoprene pads. Just peel of the adhesive
side and stick onto the base as indicated in diagram d.
Turn the Mede8er upside down and unscrew the hard drive
SATA
d)
Lift cover from
this side
x
y
CONNECTIONS
Analogue Audio and Composite Video connection to TV.
Composite Video offers the most basic picture quality connection and should only be used if your TV does
not have a HDMI or Component input. Use RCA analogue audio outputs in the absence of HDMI or Digital
Audio inputs on your TV or Home Theatre system. RCA analogue outputs will output a downmix from mutli-
channel to stereo.
AUDIO IN
L R
VIDEO IN
HDMI Coax Digital
Connect LAN cable to router or switch
Optical Digital
HDMI - RJ45 Network - Coax Digital - Toslink Connection to a TV or Amplifier
For digital audio connection to your Home Theatre System you can either use the TOSLINK Optical or the
Coax Digital output. The MED500X supports both Passthrough and Downmix for both Dolby Digital and
DTS signals. If you want your Home TheatreAmplifier to decode the surround sound stream you should
use either Digital Audio output and set the Audio Output to SPDIF RAW in the Setup menu.
Page5
Component Video Connection to Amp or TV
Component Video offers the next best picture quality to HDMI so if your system does not have a HDMI
input we suggest you use the Component Video Connection.
Pr Pb Y
Power up and Standby
Plug the AC/DC adapter into the mains outlet and plug the DC Jack into the DC IN at the rear of the
MED500X. DO NOT USEANYAC/DC ADAPTER AND ONLY USE THE ONE SUPPLIED otherwise you
may cause damage to the unit. Press the On/ Off button on the Mede8ers front panel and front facia LED
will turn on Blue. You can put your Mede8er into standby by pressing the On/ Off button on the remote.
When in standby the front facia LED will turn Red.
Page6
Page7
TV OUTPUT SETTINGS
Connect the Mede8er to your TV by one of the connection options as shown on page 5 & 6 and change the
input option on your TV to match the option you selected. If you do not get to see the Mede8er GUI on your
TV you will need to toggle the Mede8er TV output until you get a picture.
TV SYS Toggle Procedure
The Mede8er has three video output options ie Composite Video
(yellow RCA connectors, Component Video (Red - Green- Blue
connectors) and HDMI. Each output option also offers different
screen resolution settings and these will need to be adjusted to
match the type of TV used.
To change the Video Output on the
Mede8er just press the TV SYS
button on the remote and it will
change the Video Output to the
next available output option. If after
pressing the TV SYS button you still
do not get a picture then after a
short pause press the TV SYS again
until you see the Mede8er GUI on your
TV. Keep repeating this procedure until you
see a picture on your TV.
AUDIO SETTINGS
HDMI Downmix (2 channel)
Use this setting if you are connecting the Mede8er directly to the HDMI input on your TV. The
sound will be downmixed to 2 channel stereo.
HDMI Passthrough
Use this setting if you are connecting to the HDMI input of a Home TheatreAmplifier. The audio will be
passed through as Bitstream or LPCM and the amplifier will do the multichannel decoding.
SPDIF Downmix (2 channel)
Use this setting to connect to a Amplifier via Toslink optical cable or Co-Axial Digital RCA cable.
The sound will be downmixed to 2 channel stereo.
SPDIF Passthrough
Use this setting to connect to amplifier via Toslink optical cable or Co-Axial Digital RCA cable.
The sound will be passed through as Bitstream or LPCM and the amplifier will do the
multichannel decoding.
Once you see the Mede8er GUI on your TV then you must enter the Video Setup
mode and adjust the Video settings to match the screen size resolution of your
TV.
FORMATTING THE HARD DRIVE
The MED500X has a built in Hard Drive format feature that formats the hard drive with a main NTFS
partition and other small internal partitions for propriety use.
The Hard Drive should be formatted in the Mede8er MED500X to ensure full functionality. A pre formatted
Hard Drive can be used but you may not be able to use all the internal features of the MED500X.
To Format the internal Hard Drive select SETUP menu and then HDD Format. The Hard Drive format
function can be protected by the built in “Pin Code Lock” function. To enable Hard Drive Format protection
just enable “Pin Protection” option in the Setup menu.
WARNING: FORMATTING THE HARD DRIVE WILL ERASE ALL DATA
Formatting ...
Page8
USB CONNECTION TO PC
You can transfer files to and from the Mede8er via fast USB2.0 transfer. Use the included USB cable to
connect the Mede8er MED500X to your PC. As soon as the USB cable from the Mede8er is connected to
your PC the front Blue LED on the Mede8er will switch off and then on again. The Mede8er will now
connect.The computer will automatically install the correct drivers and then you will be able to navigate the
Mede8er like any normal external USB drive. Note: Some Computers may take up to a few minutes to
install the correct USB drivers.
EXTERNAL USB DEVICE DRIVER NOT REQUIRED
Page9
REMOTE FUNCTIONALITY
Audio Selection
Subtitle
Setup Menu
Return
Goto
Numbers
Info Screen
Audio Mute
On / Off
TV System
Rewind
Fast Forward
Home Page
DVD Menu / Menu
Slow / Zoom
Pause
Skip Forward/Back Select
Confirm
Volume Down
Volume Up
Fast Forward
Fast Rewind
Pause / Play
Navigation Buttons Additional Functionality
To assist ease of use operation - The Mede8er remote has been designed to be ergonomic and simple to
use. While watching your Videos you can intuitively navigate and change certain function without the need to
continually look at the remote control.
During Video Playback (excluding DVD files) you can use the navigation buttons for operational functions like
Fast Forward, Rewind, Pause, Stop, Volume Up and Volume Down.
*Navigation Left
Repeat Shuffle
Play Stop
Next/Previous
Volume Up/Down
Navigation Right - FF in Video File (not DVD)
Navigation Up - Volume Up in Video File (not DVD)
Navigation Down - Volume Down in Video File (not DVD)
Navigation Enter - Pause / Play in Video File (not DVD)
Music Playlist
* Rewind in Video File (not DVD)
Otros manuales para MED500X
2
Tabla de contenidos
Otros manuales de Reproductor multimedia de Mede8er
Mede8er
Mede8er MED250X Manual de usuario
Mede8er
Mede8er MED500X2 Manual de usuario
Mede8er
Mede8er Med1000X3D Manual de usuario
Mede8er
Mede8er MED500X Manual de usuario
Mede8er
Mede8er MED400X2 Manual de usuario
Mede8er
Mede8er MED500X Manual de usuario
Mede8er
Mede8er MED500X2 Manual de usuario
Mede8er
Mede8er MED200X Manual de usuario
Mede8er
Mede8er MED400X MINI Manual de usuario
Mede8er
Mede8er MED800X Manual de usuario
