Mech Marvels MM212RTT Manual de usuario

MECH MARVELS

REAR TINE TILLER

MM212RTT

INSTRUCTION MANUAL

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

Thank you for purchasing a Mech Marvels Tiller. This manual provides important information on proper

operation & maintenance. Read and save these instructions. Every effort has been made to ensure the

accuracy of this manual. These instructions are not meant to cover every possible condition and

situation that may occur. We reserve the right to change this product at any time without prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,

DO NOT OPERATE THIS PRODUCT!

DO NOT RETURN THIS REAR TINE TILLER TO THE RETAILER

If you experience a problem, have questions, or need parts for this product, please call Customer Service at

1-800-832-2966, Monday-Friday, 9 AM - 6 PM Central Time

. A copy of the sales receipt is required.

FOR CONSUMER USE ONLY NOT FOR PROFESSIONAL USE.

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE

REFERENCE. UNIT SERIAL #________________________

FOR FURTHER INFORMATION AND MANUAL UPDATES VISIT:

WWW.MECHMARVELS.COM

Version 20211230

NEED HELP? 1-800-832-2966

CARBON MONOXIDE

Running this tiller indoors

CAN KILL YOU IN MINUTES

Engine exhaust contains carbon monoxide (CO). This is a poison you cannot see or smell. If you

can smell the exhaust, you are breathing CO. But even if you cannot smell the exhaust, you could

be breathing CO.

CALIFORNIA PROPOSITION 65

WARNING: This product, or the exhaust from this product, may contain chemicals known to

the State of California to cause cancer, birth defects, or other reproductive harm.

For more information, view OEHHA's Proposition 65 page: https://www.p65warnings.ca.gov

Contains LEAD. May be harmful if eaten or chewed. May generate dust containing lead. Wash hands

after use and keep out of reach of children.

NEED HELP? 1-800-832-2966 
3 
 
Contents 
SAFETY SYMBOLS, WORDS, AND LABELS.............................................................................................................................. 5 
Operator Responsibilities................................................................................................................................................... 7 
Fuel Safety ........................................................................................................................................................................ 7 
Site Preparation and Safety............................................................................................................................................... 8 
Operational Precautions During Use ................................................................................................................................. 8 
Safety of Children .............................................................................................................................................................. 9 
Maintenance and Adjustment ............................................................................................................................................ 9 
PACKAGE CONTENTS ............................................................................................................................................................. 10 
MACHINE COMPONENTS ........................................................................................................................................................ 11 
ASSEMBLY INSTRUCTIONS .................................................................................................................................................... 12 
Unboxing the Tiller........................................................................................................................................................... 12 
Wheel Assembly.............................................................................................................................................................. 12 
Depth Regulator .............................................................................................................................................................. 12 
Handlebars (lower) .......................................................................................................................................................... 13 
Handlebars (upper).......................................................................................................................................................... 13 
Front Guard ..................................................................................................................................................................... 13 
PREPARING THE MACHINE FOR USE.................................................................................................................................... 14 
Using this Machine for the First-Time .............................................................................................................................. 14 
STARTING THE MACHINE........................................................................................................................................................ 15 
Pre-Start Inspection......................................................................................................................................................... 15 
Starting the Tiller ............................................................................................................................................................. 16 
USING THE MACHINE .............................................................................................................................................................. 16 
Engine Speed Adjustment ............................................................................................................................................... 17 
Tilling ............................................................................................................................................................................... 17 
STOPPING THE MACHINE ....................................................................................................................................................... 18 
ADJUSTING THE MACHINE ..................................................................................................................................................... 19 
Wheel Locking Pins ......................................................................................................................................................... 19 
Handlebar Adjustment ..................................................................................................................................................... 19 
Depth Regulator Adjustment............................................................................................................................................ 20 
MAINTENANCE/CARE .............................................................................................................................................................. 21 
Recommended Maintenance Schedule........................................................................................................................... 21 
To Maximize Product Life ................................................................................................................................................ 22 
Engine:.................................................................................................................................................................... 22 
Transmission:
 ........................................................................................................................................................ 22 
Axle Shaft:
.............................................................................................................................................................. 22 
Tires:
 ...................................................................................................................................................................... 22 
Tines:
...................................................................................................................................................................... 23 
Air Filter:
................................................................................................................................................................. 23 
Replacing Drive Belts
..................................................................................................................................................... 24 

NEED HELP? 1-800-832-2966

To remove the forward drive belt: ........................................................................................................................... 24

To remove the reverse drive belt: ........................................................................................................................... 24

To install the reverse drive belt: .............................................................................................................................. 24

To install the forward drive belt: .............................................................................................................................. 24

Cleaning the Machine

.................................................................................................................................................... 25

STORAGE PROCEDURES........................................................................................................................................................ 25

TROUBLESHOOTING

.............................................................................................................................................................. 26

SPECIFICATIONS...................................................................................................................................................................... 27

WARRANTY............................................................................................................................................................................... 28

NEED HELP? 1-800-832-2966

SAFETY SYMBOLS, WORDS, AND LABELS

Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible conditions and

situations that may occur. Common sense, caution and care must be exercised when operating or cleaning tools and

equipment.

Always contact your dealer, distributor, service agent or manufacturer about problems or conditions you do not understand.

This is the safety alert symbol. It is used to alert you to

potential personal injury hazards. Obey all safety

messages that follow this symbol to avoid possible

injury or death.

DANGER indicates an imminently hazardous situation

which, if not avoided, will result in death or serious injury.

WARNING indicates a potentially hazardous situation which,

if not avoided, could result in death or serious injury.

CAUTION indicates a potentially hazardous situation which,

if not avoided, may result in minor or moderate injury.

CAUTION used without the safety alert symbol indicates a

potentially hazardous situation which, if not avoided, may

result in property damage.

Safety Warning Symbols—The following symbols may be present on your machine. Carefully read and understand their meaning.

Look for this symbol to point out important safety precautions. It means: Attention! Become Alert! Your Safety Is Involved.

Read operator’s manual before operating this machine. Failure to follow directions could result in serious injury.

Thrown objects. Remove all rocks, stones, and foreign objects which could be thrown by machine. Work protective clothing and keep

all children and bystanders clear of the work area.

Do NOT touch hot muffler or cylinder. These parts are extremely hot from operation and may remain hot for a period of time after

operation.

Rotating tines can cause serious injury. Keep hands, feet, and clothing away.

Engine exhaust contains carbon monoxide, an odorless and deadly gas. NEVER run unit indoors or in a poorly ventilated area.

To reduce risk of fire, clean up any spilled gas or oil and keep unit free from debris. Gasoline is extremely flammable. Allow machine to

cool completely before refueling.

Disconnect spark plug wire prior to clearing the tines or servicing the machine.

Wear eye protection when using this machine.

Wear hearing protection when using this machine.

NEED HELP? 1-800-832-2966

Control and Operating Symbols—The following symbols may be present on your machine. Carefully read and understand their meaning.

Oil Fill Location:

Do Not Overfill.

Fuel ON/OFF Valve: Move fuel valve lever to the ON position to operate the machine.

Choke Lever: Move choke lever to start position (closed) for cold engine starting. Gradually move the choke

lever to the run (open) position once the engine is started, or for warm engine starting.

Throttle Control: Move throttle lever to the left to increase engine speed. Move throttle lever to the right to

decrease engine speed.

Clutch Lever: Squeezing the upper lever towards the handlebar engages the wheels and tines for forward

travel/tilling. Squeezing the lower lever towards the handlebar engages the wheels and tines to reverse (back

up) the tiller.

IMPORTANT SAFETY INSTRUCTIONS

Before using this machine and if you have any questions regarding the hazard and safety notices listed in this manual and/or on this machine,

call 1-800-832-2966, Monday - Friday, 9 AM - 6 PM Central Time.

Carbon Monoxide Gas: When in operation, the exhaust from this machine contains poisonous carbon monoxide gas.

Carbon monoxide gas is both odorless and colorless and may be present even if you do not see or smell gas. Breathing this poison gas

can lead to headaches, dizziness, drowsiness, loss of consciousness and eventually death.

Use this machine ONLY outdoors in non-confined areas.

Keep at least several feet of clearance on all sides to allow for proper ventilation for this machine.

High Temperatures: This machine produces heat when in operation. Temperatures near the exhaust can exceed 150° Fahrenheit (65° Celsius).

Do not touch hot surfaces. Observe all warning placards on this machine denoting hot surfaces.

Allow this machine to cool for several minutes after use before touching the engine, muffler, or other areas that are hot during operation and before storing or

transporting the machine.

Hot exhaust may ignite some materials. Keep flammable materials away from this machine.

Keep several feet of clearance on all sides of this machine during operation. Do not enclose this machine in any structure.

Usage: Prolonged exposure to high noise levels can be hazardous to hearing.

Always wear ANSI-approved hearing protection when operating or working around the machine when it is running.

Anytime you are servicing this machine:

To prevent accidental starting, turn the engine kill switch to the “Off” position.

Disconnect the spark plug lead from the spark plug, and secure it away from the spark plug.

Keep hands, feet, and clothing away from moving parts of the machine until it is made safe.

Carefully inspect the area where the tiller will be used:

Thoroughly inspect the area where the tiller is to be used and remove all foreign objects

Your equipment can propel small objects at high-speed causing personal injury or property damage.

Stay away from breakable objects, such as house windows, auto glass, greenhouses, etc.

Check that all nuts and bolts are tight and equipment is in good condition before each use.

NEED HELP? 1-800-832-2966

Operator Responsibilities

➢Carefully read and follow these safety instructions. Failure to do so can result in serious injury.

➢Know your product. Read and understand this manual before use. Compare the illustrations to unit. Learn location and

function of all controls.

➢Thoroughly understanding the unit before use will result in the best performance and safety.

➢Keep area of operation clear of all bystanders, particularly small children and pets.

➢Only allow responsible individuals, who are familiar with the instructions, to operate the tiller.

➢Do not operate the tiller while under the influence of alcohol, drugs, or other medication which can cause drowsiness or

affect your ability to operate this machine safely.

➢Do not use this machine if you are mentally or physically unable to operate the machine safely.

➢Never operate the tiller without good visibility or light.

➢Follow all instructions when assembling the unit. If the unit was purchased in assembled condition, the operator must

check the unit carefully to make sure it was assembled according the instructions in the manual before use.

➢Regularly inspect the machine. Make sure parts are not bent, damaged, or loose.

➢Use this equipment for its intended purpose only.

➢Operate the unit only with guards, shields, and other safety items in place and working correctly.

➢Service the unit only with authorized or approved replacement parts.

➢Complete all unit maintenance and adjustments according to the instructions in this manual

Fuel Safety

➢Gasoline is extremely flammable, and gasoline vapors can explode if ignited. Handle with care.

➢Use only approved containers for transport and storage.

➢Check fuel supply before each use, allowing space for expansion when filling, as the heat of the engine and/or sun can

cause fuel to expand.

➢Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

➢Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling.

➢Do not smoke while refueling.

➢Never fill gasoline containers or the tiller fuel tank inside of a vehicle or in a truck bed. Accidental electrical static discharge

can ignite fuel vapors which could result in serious injury or death.

➢After refueling, replace fuel tank cap securely and wipe up spilled fuel.

➢Never store fuel, or a tiller with fuel in the tank, inside a building where fumes may reach a source of ignition. Ignition

sources that may be present are items such as water heaters, space heaters, and clothes dryers.

➢To reduce the risk of fire, keep the tiller free of grass, leaves, or other debris build-up.

➢Allow the engine to cool completely before storing in any enclosure.

➢Always refer to the storage instructions for important details if the tiller is to be stored for an extended period of time.

NEED HELP? 1-800-832-2966

Site Preparation and Safety

➢Thoroughly inspect the area where the tiller is to be used and remove all foreign objects. Your equipment can propel small

objects at high-speed causing personal injury or property damage. Stay away from breakable objects, such as house

windows, auto glass, greenhouses, etc.

➢Keep area of operation clear of all bystanders, particularly small children and pets.

➢After striking a foreign object, stop the engine. Remove the wire from the spark plug and keep the wire away from the plug

to prevent accidental starting. Thoroughly inspect the tiller for any damage. If damaged, have the equipment repaired by a

trained technician before restarting and operating.

➢Only allow responsible individuals, who are familiar with the instructions, to operate the tiller.

➢Never allow children or young teenagers to operate the tiller.

Operational Precautions During Use

➢Always wear ANSI compliant safety goggles or safety glasses with side shields when operating the tiller to protect your

eyes from foreign objects, which can be thrown from the unit.

➢Wear appropriate clothing such as a long-sleeved shirt or jacket. Also wear long trousers or slacks. DO NOT wear shorts.

DO NOT wear loose clothing which could get caught in this equipment.

➢Always wear work gloves and sturdy footwear such as leather work shoes or short boots. These will protect ankles and

shins from small sticks, splinters, and other flying debris, and improve traction.

➢Do not put hands or feet near or under rotating parts.

➢Disengage clutch lever and stop engine before leaving the tiller in operating position. Wait until the tines come to a

complete stop before removing debris or making any adjustments to the tiller.

➢Do not attempt to till hard soil, till too deep or till at too fast a rate that can overload the tiller.

➢If the tiller should start to vibrate abnormally, stop the engine, disconnect the spark plug wire and prevent it from touching

the spark plug. Check immediately for the cause. Vibration is generally a warning of trouble

➢Exercise extreme caution when operating on or crossing gravel drives, walks, or roads. Stay alert for hidden hazards or

traffic.

➢Exercise caution to avoid slipping or falling. Always be sure of your footing; keep a firm hold on the handle and walk; never

run. Never operate the tiller at high speeds on slippery surfaces.

➢Watch for holes, ruts, bumps, or other rough ground. Tall grass can hide obstacles.

➢Never attempt to start the tiller unless both wheels are in the locked position. This acts as a brake for the tiller. Always start

the tiller on a level surface.

NEED HELP? 1-800-832-2966

Safety of Children

➢Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the tiller

and the tilling activity.

➢Keep children out of the tilling area and under the watchful care of a responsible adult.

➢Never assume that children will remain where you last saw them.

➢Be alert and turn tiller off if children enter the area.

➢Before and while moving backwards, look behind and down for small children.

➢Never allow children to operate the tiller.

➢Use extra care when operating near blind corners, shrubs, trees, or other objects that may obstruct vision.

Maintenance and Adjustment

➢Stop the engine before cleaning, repairing, or inspecting the unit. Make sure all moving parts have stopped. Let the engine

cool, disconnect the spark plug wire and move it away from the spark plug.

➢Keep the tiller in safe working condition. Check all fasteners at frequent intervals for proper tightness.

➢When servicing or repairing the tiller, do not tip the machine over or up unless specifically instructed to do so in this

manual. Service and repair procedures can be done with the tiller in an upright position. Some procedures will be easier if

the machine is lifted on a raised platform or working surface.

➢Use only original equipment or authorized replacement parts.

➢Never tamper with safety devices. Check their proper operation regularly.

➢Do not change the engine governor setting.

➢Clean and replace safety and instruction decals as necessary.

➢To guard against engine over-heating, always have engine filters mounted and clean.

NEED HELP? 1-800-832-2966

PACKAGE CONTENTS

The following items are supplied with this MECH MARVELS machine. Verify that all items are included.

STOP!

If there are missing items,

call 1-800-832-2966 Monday - Friday, 9 AM - 6 PM Central Time

for customer service.

DO NOT RETURN THIS MACHINE

TO THE RETAILER.

Item List:

(2) Wheel retainer pins

(1)

Depth regulator adjustment pin

(1)

Depth regulator

(4) Sets of saddle bolts and handlebar knobs

(4) 8mm bolts and nuts

(4) 10mm bolts, (2) 10mm nuts

Tabla de contenidos

Otros manuales de Caña del timón de Mech Marvels

Mech Marvels

Mech Marvels MM212FTT Manual de usuario

Mech Marvels

Mech Marvels MM43MC Manual de usuario

Manuales populares de Caña del timón de otras marcas

MTD

MTD 410R Manual de usuario

Craftsman

Craftsman 247.29931 Manual de usuario

MTD

MTD FRT Series Manual de usuario

Craftsman

Craftsman 917.298353 Manual de usuario

Troy-Bilt

Troy-Bilt Colt FT Manual de usuario

Ryobi

Ryobi 510r Manual de usuario

MTD

MTD OHV Series Manual de usuario

YAT

YAT YT5601-01 Manual de mantenimiento

Craftsman

Craftsman 917.296010 Manual de usuario

Troy-Bilt

Troy-Bilt OEM-290-260 Manual de usuario

Scheppach

Scheppach MTP560 Instrucciones de montaje

GARDEN WAY

GARDEN WAY 12194 Manual de usuario

Classen

Classen STAND-AER SA-25 Instrucciones de instalación y mantenimiento

Craftsman

Craftsman 850 Series Manual de usuario

DR PILOT 2 Guía de inicio rápido

Altrad

Altrad ATIKA BH 1400 N Guía

WIL-RICH

WIL-RICH 2500 Manual de usuario

Viking

Viking HB 685 Manual de usuario