MDH Vitea Care Umbrella 1 Manual de usuario
Instrukcja używania
Instructions for use
Umbrella
REHABILITATIVE
STROLLER
(DRVG0C)
BASIC UDI-DI 59017804DRVG0JN9
Umbrella
WÓZEK INWALIDZKI
SPECJALNY, DZIECIĘCY
(DRVG0C)
BASIC UDI-DI 59017804DRVG0JN9
232
Instructions for use
TABLE OF CONTENT
1. Introduction 3
2. Product description 3
3. Indications 6
4. Contradictions 6
5. Usage 6
6. Safety of use 12
7. Everyday use and maintenance 14
8. Technical parameters 28
9. Symbols 29
10. Contact details 30
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2020-11
2 VITEACARE.COM
ATTENTION
Always follow the basic precautions according to the information included
below and regarding safety measures when using the device. Read the entire
instructions carefully before use. Keep this user’s manual for future reference.
Umbrella rehabilitative stroller is available in three sizes, further known as
Umbrella 1, Umbrella 2 & Umbrella 3. For detailed information please refer to
the Technical Parameters section.
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2020-11 VITEACARE.COM 3
1. INTRODUCTION
Thank you for choosing our product. We are deeply convinced that it will meet
your expectations. Please read this document before rst use. This manual
was made in order to provide the necessary information on the safe use of
the device. The correct application of the recommendations will contribute
signicantly to extended durability and visual design of the product. We would
like to highlight that to date we are constantly improving the quality of our
products, which may result in minor changes that are not included in this
manual.
2. PRODUCT DESCRIPTION
Fig. 1. Construction scheme of Umbrella rehabilitative stroller.
1. Handle, 2. Canopy handle, 3. The side lock, 4. Stroller frame, 5. Footrest length
adjustment knob, 6. Dual rear wheels (or single in Umbrella 3), 7. The front swivel wheel
with possibility of straight ahead ride lock, 8. Canopy, 9. Head stabilizer, 10. Backrest
upholstery (with side pelottes and lumbar roller support), 11. Front guard, 12. Abduction
wedge, 13. Calf stabilizing belt, 14. Basket for small items, 15. The footrest.
4 VITEACARE.COM
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2020-11
EQUIPMENT OF THE STROLLER’S PACKAGE
Fig 2. Stroller
Fig 3. Canopy
Fig 4. Wheels
Fig 4. Head stabilizer, front guard (2 versions, black - additional option), abduction wedge, set of
side pelottes with lumbar roller support
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2020-11 VITEACARE.COM 5
Fig 5. Basket for small items, umbrella (additional option), table (additional option), cup
Fig 6. Sleeping bag Fig 7. Raincover
6 VITEACARE.COM
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2020-11
3. INDICATIONS
The stroller is designed for children with disabilities and / or dysfunctions movement activities
as a result of damage of the CNS Central Nervous System. It can be used in children with CP
Cerebral Palsy, myelomeningocele, muscle disorders, dysfunctions of the lower limbs.
The maximum weights are 30 kg (Umbrella 1) 45 kg (Umbrella 2) & 75 kg (Umbrella 3).
4. CONTRAINDICATIONS
Contradictions against sitting position.
5. USAGE
• After unpacking the package, check if it contains all parts in accordance with the list of
elements set out above.
• Ensure that all components have no visible damage. If any doubts, please contact the
manufacturer.
• Do not use the stroller until all parts are properly connected.
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2020-11 VITEACARE.COM 7
UNFOLDING THE STROLLER
Fig 8. Unfolding the stroller
• Unfolding the stroller should begin with pulling the stroller handles in a direction which is shown
in Figure 8. In order to make it easier, you can hold with hand the seat of the stroller.
• When the stroller is partially unfolded, press foot on the stroller blockade (Figure 9.) to the point
where stabilizing elements will stop in a horizontal position (Figure 10).
Fig 9. Rear lock of the stroller Fig 10. Correct position of rear lock
Rear lock of
the stroller
8 VITEACARE.COM
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2020-11
Fig 11. Stroller frame with lock
Fig 13. Assembled and locked
rehabilitative stroller
• To prevent unplanned movement of the stroller, lock the possibility of rotation the two
rear wheels.
• To do this, press the foot brake lever, located at the rear wheel.
• It is necessary to make sure that the brake has been launched on both wheels.
• Stroller frame is equipped with the side lock. To lock the side frame, the side lock
eyelet should be put on the free end of the frame (Figures 11., 12.).
Side lock
eyelet
Fig 12. Locked eyelet on the stroller
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2020-11 VITEACARE.COM 9
• By using the snaps attach the upholstery belt to the front guard. But rst you need to
fasten abduction wedge to the upholstery belt.
• In the same way table can be attached to the stroller (Figure 16).
• Abduction wedge is connected to velcro which should be wrapped around the
upholstery waist (Figure 16.).
Fig 14. Front guard lock button (open)
Fig 16. Abduction wedge, table and upholstery waist assembled
• To install the front guard, put the plastic ends into the guides on the stroller frame in
the direction from top to bottom (Figures 14., 15.).
Fig 15. Front guard lock button (closed)
• Then install the backrest. Unfasten the velcro fasteners of head stabilizer at the rear
part of the upholstery, select the appropriate location of the head stabilizer. Drag velcro
headrest through the holes in the top of the backrest upholstery, then fasten velcro.
• To install the canopy put the plastic ends into the guides on the stroller frame in the
direction from top to bottom. (Figures 17., 18.)
• The footrest should be lowered on the footrest frame and push it until total blockade.
10 VITEACARE.COM
MODEL: JUNIOR PLUS 2 & 3
LANGUAGE: ENGLISH VERSION: 2020-11
• The back part of the canopy should be located on the outer side of the backrest.
Velcro strips on both sides of the canopy should be fastened on the wheelchair frame
under the handles.
Fig 18. Canopy lock (closed)
Fig 17. Canopy lock button (open)
Fig 19. Canopy assembled to the stroller Fig 20. Basket assembled to the stroller
• Basket for small items must be installed between the seat and the cross frame. (Figure
20.) The basket is equipped with velcro to be wrapped around four the furthest located
stroller frame.
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Idiomas:
Otros manuales de Paseante de MDH
