MBT LEDMOONDOG Manual de usuario
User manual
LEDMOONDOG
1
Table of contents
Introduction--------------------------------------------------------------------------------------2
Safety information-----------------------------------------------------------------------------2
Panel review------------------------------------------------------------------------------------2
Installation----------------------------------------------------------------------------------------3
Overhead mounting----------------------------------------------------------------------3
Multi-connectors---------------------------------------------------------------------------3
Input/output pin----------------------------------------------------------------------------4
Operation-----------------------------------------------------------------------------------------4
Switch on/off--------------------------------------------------------------------------------4
Brief function chart------------------------------------------------------------------------4
DMX mode-----------------------------------------------------------------------------------5
MASTER mode-----------------------------------------------------------------------------8
SLAVE mode--------------------------------------------------------------------------------9
Maintenance-----------------------------------------------------------------------------------11
Troubleshooting-----------------------------------------------------------------------------11
Cleaning--------------------------------------------------------------------------------------12
Technical specification----------------------------------------------------------------------12
Appendix----------------------------------------------------------------------------------------13
2
INTRODUCTION
Welcome to use LED moon flower light. This unit has DMX mode, Sound active mode
and Master/Slave mode. It adopts dipswitches to choose functions, which makes it easy to
operate. Besides, it is compactable and suitable for all kinds of entertainment places.
Read the instructions carefully and thoroughly before use and follow operations it
referred to you.
Main features:
zDMX –512 protocol, 9 DMX channels
zDMX mode, automatic mode, sound active and Master/Slave mode
zBuilt-in auto programs
zBuilt-in sound active programs
SAFETYINFORMATION
zFor indoor use only.
zPut it in a dry, ventilated place in case of short cut caused by erosion of moisture and
rain.
zDo not install it nearby hot place in case rising temperature of light damage itself.
zDo not barrier vent in order to ventilate well and dissipate in time.
zConnect the light with power source and ground the fixture electrically. Voltage of
power source is in accordance with rating voltage.
zIf fuse was damaged, change it with the same type fuse.
zNo spared accessories is available .If needed, please contact the factory.
zAmbient of the light should not exceed 400
zIf any problem, contact professional technician to solve.
PANELREVIEW
3
INSTALLATION
Overhead mounting
zVerify that the structure can support at least 10 times the weight of all installed
fixtures, clamp, cables, auxiliary equipment, and other items.
zIf hanging the fixture with a rigging clamp, verify that the clamp is undamaged and is
designed for the fixture’s weight. Bolt the clamp securely to the mounting bracket on
the fixture with a grade 8.8 minimum.
zWorking from a stable platform, clamp or fasten the fixture to the structure
zLoose the swivel locks, tilt the fixture to the desired angle, and retighten it.
zVerify the fixture is at least 3.3ft from the surface to be illuminated and at least 1ft from
any combustible materials.
Multi-connectors methods
Controller/Master Light 1 Light2 … Light n
Input/output pin instruction
4
OPERATION
Switch on/off
Switch 2 is on, the left is off .
Brief function chart (X means both On and Off are ok)
Switches
Function #1 #2 #3 #4 #5 #6 #7 #8 #9 #10
D M X Set DMX address ON
S LA V E x x x x x x x x x ON
M
A
S
T
E
R
SOUND AUTO OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
AUTO Auto speed OFF OFF OFF OFF ON OFF
STROBE x x x x Strobe speed OFF ON OFF
ALL ON x x x x x x x ON ON OFF
5
DMX mode introduction
Setting DMX mode
Notes: X means no matter dipswitch1~9 is ON or OFF, dipswitches will not function.
Calculate DMX address
FOR EXAMPLE: if switch #2 and switch#3 is on and the left are off, DMX address is 6.
(0+0+0+0+0+0+4+2+0 = 6)
Switch #9 =0; Switch #8 = 0; Switch #7 = 0; Switch #6 = 0; Switch #5 =0;Switch #4 =
0;Switch #3 = 4;Switch #2 = 2; Switch #1 = 0.
Notes: 1. DMX address can be set by switches1~9.
2. when switch10 is ON, it is DMX mode, otherwise it is MASTER /SLAVE mode.
3. When switch is ON, its value is the correspondent data on the top.
DMX function
zWhen DMX signal exists, blue LED will flash.
zEach fixture occupies 9 DMX channels.
zDMX 512 signal can control multi fixtures ’ different movements at the same time.
zDifferent DMX address of each fixture will lead to different movements.
zHowever, DMX address should be set first.
6
7
Channel Data Function
1
000 199
Mode
strobe
200 249 Sound active（all clusters in auto mode）
250 255 Auto + sound
2
000 031
LED
Cluster1
No mode
032 063 Auto mode 1
064 095 Auto mode 2
096 127 Auto mode 3
128 131 No mode
132 255 Static color (refer to static color chart)
3
000 031
LED
Cluster2
No mode
032 063 Auto mode 1
064 095 Auto mode 2
096 127 Auto mode 3
128 131 No mode
132 255 Static color (refer to static color chart)
4
000 031
LED
Cluster 3
No mode
032 063 Auto mode 1
064 095 Auto mode 2
096 127 Auto mode 3
128 131 No mode
132 255 Static color (refer to static color chart)
5
000 031
LED
Cluster4
No mode
032 063 Auto mode 1
064 095 Auto mode 2
096 127 Auto mode 3
128 131 No mode
132 255 Static color (refer to static color chart)
6 000 031 LED No mode
8
032 063 Cluster5 Auto mode 1
064 095 Auto mode 2
096 127 Auto mode 3
128 131 No mode
132 255 Static color (refer to static color chart)
7
000 031
LED
Cluster 6
No mode
032 063 Auto mode 1
064 095 Auto mode 2
096 127 Auto mode 3
128 131 No mode
132 255 Static color (refer to static color chart)
8
000 031
LED
Cluster
7
No mode
032 063 Auto mode 1
064 095 Auto mode 2
096 127 Auto mode 3
128 131 No mode
132 255 Static color (refer to static color chart)
9
000 009
Strobe
No
010 209 fast—>slow( in static colors)
210 255 Sound active mode (in static colors)
MASTER mode introduction
This light is connected with multi-fixtures and a controller. Set one master connected with
the controller and the left fixtures are slaves.
Auto+Sound active mode
9
Auto mode
Notes:1.Adjust auto speed by switch#1~4
2. Switch#5,6,7,8,10 is off.
Auto speed adjustment(X means both On and Off are ok)
Switch1 Switch2 Switch3 Switch4 Auto speed
OFF OFF OFF OFF No speed
ON OFF OFF OFF Slow
×ON OFF OFF Middle
××ON OFF Fast
×××ON Very fast
Strobe mode
Notes: 1.No matter switch#1~4 is On or Off, it won’t affect performance.
2.Adjust strobe speed by switch#5~7(see the following chart).
Strobe speed adjustment (X means both On and Off are ok)
Switch5 Switch6 Switch7 Strobe speed
OFF OFF OFF No speed
ON OFF OFF Slow
×ON OFF Middle
××ON Fast
All on (switch#1~7 won’t function no matter On or Off)
Tabla de contenidos
Manuales populares de Equipo de DJ de otras marcas
thomann
thomann Stairville DJ Lase 40-G MK-III Manual de usuario
Eagletone
Eagletone 6 Eyes Flower Manual de usuario
EuroLite
EuroLite FLD-1508 Manual de usuario
Technical Pro
Technical Pro LG8xSEA Manual de usuario
JB Systems
JB Systems Lounge Laser DMX Manual de usuario
Lightmaxx
Lightmaxx Vega Halo 90 Manual de usuario
Elation
Elation FUZE WASH Z350 Manual de usuario
Maverick
Maverick MK3 WASH Manual de usuario
Infinity
Infinity TF-260C7 Fresnel Manual de usuario
Chauvet
Chauvet EVE E-50Z Manual de usuario
Eliminator Lighting
Eliminator Lighting E 138 Manual de usuario
EuroLite
EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario