Maxxair DH 065 BLU Manual de usuario
Metal Dehumidifier
115v Model: DH 065 BLU
Owner’s Manual
Please read this owner’s manual
before operating and keep
safe for future reference
- 1 - VENTAMATI , LTD.
▪
1-800-433-1626
▪
ETL Listed 4005272
GENER L INFORM TION
Thank you for choosing our Metal Dehumidifier
This Owner’s Manual will provide you with valuable
information necessary for the proper care and maintenance of
your new dehumidifier.
Please take a few moments to read the instructions thoroughly
and familiarize yourself with all the features and operation of
this dehumidifier.
Unpackaging the dehumidifier
Please do not dispose of any packaging until you have checked
the appliance is operational.
After removing the packaging ensure the contents are intact
and complete. In the unlikely event of missing parts, contact
ustomer Service at 1-800-433-1626.
Do not leave children unattended with any of the packaging
since it is a potential source of danger. Disposal of all packaging
must be carried out responsibly & safely and in accordance
with your local authority regulations.
Always recycle the packaging material where possible. When
using any electrically powered product, basic safety
precautions should always be followed.
PLEASE READ THESE INSTR CTIONS CAREF LLY
BEFORE SING THE PROD CT.
VENTAMATI , LTD.
▪
1-800-433-1626
▪
ETL Listed 4005272 - 2 -
When using any electrical appliance,
Basic safety precautions should always be followed.
IMPORT NT INSTRUCTIONS
W RNING - to reduce the risk of fire, electrical shock or injury
to persons or property:
1Always operate the product from a power source of the
same voltage, frequency and rating as indicated on the
product identification plate.
2lose supervision is necessary when any product is used by
or near children the elderly or the infirm. Do not allow
children to use the appliance as a toy.
3This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities or lack of experience and knowledge unless
they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
4Do not operate any product with a damaged power cord or
plug, after the product malfunctions, dropped or damaged
in any way. Return the complete product to the place of
purchase for inspection, repair or replacement.
5To reduce the risk of electric shock, do not expose the unit
or flexible cord to moisture of any kind.
6Switch off and unplug from the power socket when not in
use, before assembling or before cleaning.
- 3 - VENTAMATI , LTD.
▪
1-800-433-1626
▪
ETL Listed 4005272
IMPORT NT INSTRUCTIONS
7Do not place objects on the product or allow objects to
obstruct the inlet or outlet openings, or operate in close
proximity to walls or curtains, etc.
8The use of attachments or accessories not recommended
or sold by the product distributor may cause injury to
persons or damage to property.
9Do not attempt to dismantle the appliance.
10 Do not operate the appliance on a metal surface.
11 Do not use the appliance in artificially hot or humid
conditions or allow to be used in a hazardous environment.
onsult the product Specifications section for approved
operating conditions.
12 Do not clean the appliance with organic solvent.
13 This Owner’s Manual is an integral part of the appliance
and should be stored for safe keeping and must always
accompany the appliance in the event of ownership
transfer or for reference to by a service engineer.
Typical 3 prong
plug and outlet
VENTAMATI , LTD.
▪
1-800-433-1626
▪
ETL Listed 4005272 - 4 -
ontrol panel Air intake metal grille
Wheel
Water pipe
and power cord
Storage location
Water pipe
Pull rod
Rating label
Water pipe
connector
(male)
PRODUCT IDENTIFIC TION
Water pump door
FIG. : FRONT
FIG.B: RE R
Air outlet
Power cord
- 5 - VENTAMATI , LTD.
▪
1-800-433-1626
▪
ETL Listed 4005272
SETTING UP INSTRUCTIONS
SETTING UP THE DEHUMIDIFIER
W RNING
No not obstruct the air intake or air outlet
IMPORT NT
Place dehumidifier in the upright position. When
transporting a dehumidifier to site, allow the
dehumidifier to stand for 30 minutes before switching
ON. This is necessary to allow the refrigerant system to
stabilize and avoid system damage.
PL CE IN ENCLOSED RE :
For best results, operate the
dehumidifier in an enclosed area to create a "drying chamber."
lose all doors and windows that open to external areas to
maximize the dehumidifier’s water removal efficiency. Keep
traffic through the drying chamber to a minimum. Place the
dehumidifier in the center of the room away from walls and
furnishings where airflow may be obstructed.
PROPER IRFLOW IS ESSENTI L: Do not place this dehumidifier
in a position where the front Air Intake Grill or rear Air Outlet is
blocked by walls, furniture or any other obstruction.
VENTAMATI , LTD.
▪
1-800-433-1626
▪
ETL Listed 4005272 - 6 -
Front
ir
Intake
Grill
SETTING UP INSTRUCTIONS
Illustration of correct positioning for best performance
ENSURE PROPER DR IN GE: This dehumidifier contains a
built-in pump that connects to a drainage hose which is stored
in the back of the unit. Uncoil the entire hose to ensure that
there are no kinks or restrictions and place the unattached end
into a drain or run to the outdoors. Ensure that water piped to
the outdoors does not create a slipping hazard. To avoid
damaging or overworking the pump, do not exceed a 10 foot
vertical lift height between the pump and drain.
KEEP CLEAR
10 FT. MAXIM M
DRAIN HEIGHT
To Drain
Rear Drain
Hose Outlet
Drain Hose
- 7 - VENTAMATI , LTD.
▪
1-800-433-1626
▪
ETL Listed 4005272
CONTROL P NEL
Digital Control Panel
ON/OFF: Press once to turn the unit ON or OFF.
PURGE: Press the “PURGE” key to empty water
from the pump reservoir. During normal operation the
pump purges automatically when the reservoir is full. Use
“PURGE” before moving the machine to avoid water
spillage. The pump will close automatically after forty
seconds continuous operation.
FUNCTION: Press the “FUNCTION” key, The screen
will display ‘Humidity setting’ ‘Ambient humidity’ ‘Total
running hours’ ‘Ambient temperature’.
REGUL TE: Press “REGUL TE” key to adjust humidity
or set total running hours and job hours or setting
fahrenheit and centigrade.
Long press “REGUL TE” key 5 seconds, The coil sensor
temperature will display. The screen will return to display
ambient humidity after coil sensor temperature cursor
flashing 3 seconds.
Coil Sensor Temperature
VENTAMATI , LTD.
▪
1-800-433-1626
▪
ETL Listed 4005272 - 8 -
CONTROL P NEL
The LCD displays symbols
: Dehumidify ON.
: Defrost ON.
: Draining.
: Fan start up.
: Setting humidity.
: Ambient humidity.
: Total running hours.
: Ambient temperature.
- 9 - VENTAMATI , LTD.
▪
1-800-433-1626
▪
ETL Listed 4005272
OPER TION
Plug in electrical cord
This dehumidifier must be plugged into a grounded
polarized 115 VA /60Hz outlet rated at least 15 amps.
Make sure the drain hose is connected and routed to
a safe location.
Plug in electrical cord, The screen will display standby:
Turn the unit ON
Press the “ON/OFF” key to turn the unit on.
If humidity setting is less than ambient humidity, the unit
will entry to dehumidify mode. The screen will display:
If humidity setting is greater than ambient humidity, the
unit will stop working after started 1 minute.
Turn the unit OFF
Press the “ON/OFF” key to turn the unit OFF. When the
unit turns OFF, The water pump will turn on automatically
for 40 seconds to drain the residual condensate water in
the dehumidifier. The screen will appear draining
cursor.
Este manual sirve para los siguientes modelos
3
