MAXPhotonics E1-10W Manual de usuario
Maxphotonics Co.,Ltd.
E1-10W All-in-one Engraving Machine (Fiber Laser)
Copyright Notation
Copyright © Maxphotonics Co ., Ltd ( here after referred to as Maxphotonics). All
rights reserved. You may not copy, modify, transmit or publish this publication,
in any form, in any media or by any means, without the prior written permission
of Maxphotonics, except as allowed under applicable copyright laws. Permitted
copies shall bear the same copyright and proprietary notices that were contained
on the original version.
Maxphotonics believes that the information provided is accurate and reliable;
however Maxphotonics makes no warranty, representation,expression or
implication that this document can be used as reference in other occasions.
Furthermore, Maxphotonics does not assume responsibility for any infringement
of patents or other rights of third parties due to use of the information contained
in this document. Maxphotonics shall not be liable for errors contained in this
document or for direct or indirect damages of relevant equipment.
Maxphotonics and the Maxphotonics Logo are registered trademarks of
Maxphotonics Co., Ltd., and the Logo does not break any regulations of
Trademark law.Maxphotonics grants no rights for patent or other intellectual
property mentioned herein.
All information contained in this document is subject to change and revision
without notice.
Subject to change without notice.
Maxphotonics Co.,Ltd.
Address: Maxphotonics Industrial Park, 3rd Furong Road,
Furong Industrial Area, Shajing, Baoan, Shenzhen, China.518125
E-Mail: [email protected]
http://en.maxphotonics.com
1
Preface
Thank you for using the E1-10W all-in-one engraving machine products from
Maxphotonics. We compile this document for you in order that the equipment
is used and maintained properly. Due to the limited level of the writers, coupled
with time constraints, there are some careless mistakes in this document, your
understanding and suggestion to help us make an improvement will be much
appreciated . Thank you again for using Maxphotonics' products.
Please take time to read and understand this User's Guide and familiarize
yourself with the operating and maintenance instructions before you use the
product. We strongly recommend that the operator read the Section 2 titled
“Safety Information” prior to operating the product.
This User's Guide should stay with the product to provide you and all future
users and owners of the product with important operating, safety and other
information.
We identify the parts to which you need to pay special attention in the document
with underscore. Please notice those information to prevent the unnecessary
damages.
2
Company Prole
Found in 2004, Maxphotonics is one of the first fiber laser manufacturers in
China. It is also the first in China to realize independent intellectual property
rights and vertical integration in the core technologies of ber lasers and optical
devices. One of the national high-tech enterprises. Maxphotonics has developed
into an internationally renowned laser manufacturer that develops, manufactures
and sells fiber lasers and core optical components. It is the second largest
domestic ber laser manufacturer in the domestic market.
Maxphotonics specializes in the research, development, production and sales of
ber lasers, including pulsed ber lasers, continuous ber lasers and direct diode
lasers. It also implements pump sources, combiners, fiber gratings, isolators,
laser output heads, and stripping. Optical devices such as molds, acousto-optic
modulators, and pattern matchers are produced autonomously. Products are
widely used in marking, engraving, cutting, drilling, cladding, welding, surface
treatment, rapid prototyping and additive manufacturing processes.
More informations，please visit our website：
http://en.maxphotonics.com
Contents 3
Company Prole ……………………………………………………………… 2
Chapter 1 Product Accessories List ……………………………………… 5
1-Standard ……………………………………………………………………… 5
2-Professional Edition…………………………………………………………… 6
3-Deluxe Edition ………………………………………………………………… 7
Chapter 2 Button/Indicator Description …………………………………… 8
1-Host Indicator ………………………………………………………………… 8
2-Power Interface ……………………………………………………………… 8
Chapter 3 Quick Installation Instructions ………………………………… 9
1-Handheld Engraving ………………………………………………………… 9
2-Fixed Focus Bracket Installation Instructions …………………………… 10
Chapter 4 Download And Operation ……………………………………… 11
1-Download And Install ………………………………………………………… 11
2-Access The Host ……………………………………………………………… 11
3-Connect To WIFI ……………………………………………………………… 12
4-APP Device Connection ……………………………………………………… 12
Chapter 5 Product Specications ………………………………………… 14
Contents
4
Chapter 6 Use Safety Guidelines …………………………………………… 15
Chapter 7 Precautions ………………………………………………………… 17
Chapter 8 Disclaimer ………………………………………………………… 18
Chapter 9 Warn ………………………………………………………………… 19
Chapter 10 Copyright Statement …………………………………………… 21
Chapter 11 Appendix ………………………………………………………… 22
5
Chapter 1
Product Accessories List
1. Host
2. Power Adapter
3. Fixed focus bracket
4. Wireless network card
5. Goggles
6. Wooden ruler
1-Standard (products Included In This Set)
6Chapter 1 Product Accessories List
Manual lift table + host
2-Professional Edition
7
Chapter 1 Product Accessories List
3-Deluxe Edition
Electric lift table + host + mobile portable power supply + material package.
DECLARE:
◎For details of packaging, please refer to the purchased version.
8
Chapter 2
Button/Indicator Description
1-Host Indicator
2-Power Interface
1. Preview button
2. Host indicator
3. Short press to stop/long press to start
engraving button
①
①
③
③
②
②
1. Electric stand power interface
2. Exhaust fan reserved power interface
3. Host DC power interface (round)
Tabla de contenidos
Otros manuales de Impresora de MAXPhotonics
