MAXHUB ND43PNC Manual de usuario
Intelligent Multimedia Display
User Manual
Note：All the pictures in this manual are for reference only, subject to our available products.
Contents
Safety Warning........................................................................................................................................................ 1
FCC Statement........................................................................................................................................................ 4
FCC Warning............................................................................................................................................................4
Control Panel............................................................................................................................................................5
Connection and Setting.........................................................................................................................................7
Remote Control..................................................................................................................................................... 10
Maintenance...........................................................................................................................................................14
1
Safety Warning
Before operating, please read this manual thoroughly, and keep it for future reference.
Image shown in this manual is indicative only. There may be differences between the pictures
and the actual product, please prevail in kind.
Placement
Do not put heavy objects on top of the unit.
Do not put the unit near appliances that generate magnetic fields.
Do not expose the unit to direct sunlight and other sources of heat.
Do not place the unit on an unstable cart, stand, tripod, bracket, table, or shelf.
Do not put any liquid near or on the unit, make sure do not spill any liquid inside the unit.
Power Supply
Please keep power cable from physical or mechanical damage.
Please check and ensure AC source is connected with the ground.
This power cable comes with the device exclusively for this device only.
Please unplug power supply when the weather is thunder-storm or lightning.
Check that the unit’s operating voltage is identical with your local power supply.
Please use the original power cable from the accessory bag, don't modify or lengthen it.
Please unplug power supply, when there is nobody home or the unit will be in idle for a long time.
LED Screen
Unplug the power cable before cleaning.
Clean the screen with a soft, dustless and dry cloth.
For deep clean, please contact an authorized service center.
2
Never use water or the spray type detergent to clean the unit.
Never use any other hard or sharp object to replace the touch pen.
Better for the panel lifetime and the display performance, do not display high brightness image
for long time.
Temperature
Normal operating temperature is 0 ~ 40℃.
Do not place the unit near or over a radiator or a heater.
If your unit is suddenly moved from a cold to a warm place, please unplug the power cable and
do not turn it on at least 2 hours, making sure the moisture inside the unit is all evaporated.
Humidity
Do not expose the unit in rain, or place in high humidity area.
Please make sure indoor environment is dry and cool. Normal operating humidity is
10%~90%RH.
Ventilation
Please put the unit in a well-ventilated place, so the heating can be released easily.
Ensure that the unit has enough space for ventilation. Space requirement: left, right and
back >10cm, top> 20cm.
3
Earphone
Before using earphone, please turn down the volume in advance.
Using the earphone to listen loud sound for a long time might affect the hearing.
Standby
It will enter standby mode but not turn off the unit after press the standby key.
Battery
Please make sure the battery gets proper disposal or recycle after using.
Please keep the battery away from kids and don't throw the battery into fire.
Notes for Cleaning
There are vents on back cover, please do not use any liquid or spray directly during cleaning.
Power Switch Status Signs
“I” means power on, “O” means power off.
Notes for Maintenance
This machine can only be maintained by certified engineer.
4
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
5
Control Panel
1. Prepare to Install
Number
Items
Function description
1
Remote control
signal receiver
Receive the remote signal.
2
Press to scroll left
3
Press to scroll right
4
Press to scroll up
5
Press to scroll down
6
INPUT
Pop up channel Setting
7
MENU
Pop up Settings menu
8
Tap to enter energy-saving,press at least 2 seconds to enter
6
standby mode
9
Bottom
loudspeaker
Amplify audio
The appearance of different product models is slightly different, subject to our available
products.
7
2. Terminal Interface
1
HDMI OUT*
Connect to the devices with HDMI input function
2
SPDIF
Carry multichannel sound via optical signals.
3
HDMI1(ARC)&
HDMI2
High-definition multimedia interface signal input,
connect to devices with HDMI output interface
(personal computer with HDMI output, set-top box,
or another video device)
4
Display Port
Connected to devices with Display Port output
function
5
RS232
Serial interface, used for mutual transfer of data
between devices
6
VGA
External computer image input
7
PC LINE IN
External computer audio input
8
USB3.0
USB 3.0,connect USB devices such as U disk, USB
keyboard , USB drives, etc.
9
USB1&USB2
USB 2.0,connect USB devices such as U disk, USB
keyboard , USB drives, etc.
10
AUDIO OUT
Audio output to the external speaker
11
LAN
Connect RJ45 terminals
12
AC SWITCH
To open or shut down AC power supply.“I” means
power on,“O” means power off
13
AC IN
AC power input, connect AC power supply
Note :【*】indicates partial terminals are optional.
8
Connection and Setting
For the safety of you and the machine, please do not connect any power plug before connection.
HDMI OUT
HDMI IN
USB
LAN
AUDIO OUT
VGA IN &
AUDIO IN
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Monitor de MAXHUB
