Maxell Hypershock CA-BTVH Manual de usuario
ENUSER’S MANUAL
MODEL: CA-BTVH ESMANUAL DE USUARIO
POMANUAL DO USUÁRIO
LED Indicator Light Description
Basic Key Operation
Turn On
Turn O
Pairing Status Blue and green LED twinkle alternately
Blue LED stays on indefinitely
Blue LED flashes 3 times per second
Power On
Standby Mode
Low Battery
Status
Charging Status
Vibration Switch
Long press , the blue and green LED will stay on for 2 seconds,
then go out, and the headphone will turn o.
Long press , the headphone will turn on after blue LED stays on for
3 seconds. The headphone will enter the pairing mode.
Blue LED stays on indenitely, blue LED
ashes slowly when music playing
Red LED stays on while in charging, red LED
goes out while fully charged
* Vibration switch is on: white LED stays on indenitely
* Vibration switch is o: white LED goes out
2
EN
Music Pause: Short press when in music playing
Music Play: Short press when in music pause.
Answer Calls: Short press when a call coming in.
Hang Up: Short press when on a call.
Refuse to Answer: Long press when a call coming in.
When Wireless is connected, double press will re-dial the last phone
number in your call record.
Volume Adjustment
Music Selection
Play/Pause/Phone call
Headphone Turn On Status
Short press and to control volume.
Long press , the headphone will turn on, and the blue and green LED will
twinkle alternately. The headphone will enter pairing mode. Turn on the
Wireless in your cell phone and search for "UG-05", click to connect. The blue
LED will stay on indenitely after connected successfully, and the blue LED will
ash slowly when music playing.
*Note: The colorful decoration LED light will turn on automatically after the
headphone turns on, and it can be turned o by key combination.
Long press to skip to the next song.
Long press to skip to the previous song.
3
EN
Colorful Decoration LED Switch
Boom Microphone
Auto o and Long-distance Reconnect
Vibration Function Switch
In the power-on status, ip the vibration switch down, the vibration function
will be turned on (the white LED stays on indenitely), and the headphone will
vibrate with the bass. The stronger the bass, the stronger the vibration. Flip the
vibration switch upward to turn o the vibration (the white LED goes out), then
you can listen to music and play games normally, the vibrating speaker will not
work, and the music speaker will work normally.
After the headphones turn on, the colorful LED light will turn on automatically.
If you want to turn o the colorful LED light for saving battery or for other
reasons, short press the volume up and volume down button simultaneously to
turn the LED o. The colorful LED can be restarted after turned o.
*Note: The colorful LED light will not work while the headphone is in charging
or in wired mode.
Equipped with the long boom microphone for a better call experience. The long
boom mic is to enhance the call performance. During a call, if you want to talk
to others, or you don't want to be heard by the person on the other end of the
phone, short press the mute button on the microphone to stop the mic from
working.
When the mute is turned on, the headphone will beep. When you need to
resume the call, short press the mute button again.
The headphone will be disconnected automatically when out of the eective
range. When back to eective range within 5 minutes, it will auto-connect with
your phone. The headphone will turn o automatically if out of the eective for
range over 5 minutes.
4
EN
Headset And Wireless Transmitter Overview
LED
Indicator
On/O
Answer/Hang Up
Play/Pause
Vol +/
Next Track
Vol -/
Previous Track
Vibration
Switch
Micro USB
Charging port
Built-in
Microphone
Microphone
Mute Button
Long Boom
Microphone
3.5MM
Audio Port
LED Indicator
USB
Multifuction
Button
Decoration
LED Light
5
EN
Charging Mode
Power Status
Line-in Mode
Wireless Transmitter LED Indicator Description
Power On Red LED stays on indefinitely
Green LED flashes quickly
Green LED stays on indefinitely
Pairing Status
Connection
Succeeded
Plug in audio cable, the headphone turns o automatically, you can listen to the
music with the audio cable. You can use the built-in microphone or long boom
microphone. Also, you can turn on or o the vibration function by the vibration
switch.
Note: when in line-in mode, the Wireless can't be turned on. You need to unplug
the audio cable and turn on the headphone to use.
When the headphone is connected to the IOS device, the current power status
of the headphone will be showed on the upper right corner of the device
screen.
When the headphone is connected to the IOS device, the current power status
of the headphone will be showed on the upper right corner of the device
screen.
6
EN
For the First Time Using
For the Second Time and Subsequent Using
Connect with Other Wireless Devices
Power On/Power O
Wireless Connection
Long press the transmitter button for 2 seconds, the Wireless transmitter enters
pairing status with the green LED ashing quickly, now it supports listening to
music, Wireless video playback, Wireless video calls, etc.
Short press the transmitter button, the Wireless transmitter will be
disconnected with the current device with the red LED lighting on indenitely,
and the Wireless device will be turned o. Long press the transmitter button for
2 seconds to connect with other devices, the green LED will ash quickly and
stay on indenitely after connected successfully
When there is pairing information of the headphones on the device, for the
second time using, the Wireless transmitter will automatically connect back to
the Wireless device
①Insert the Wireless transmitter into the USB port of the device, the device will
automatically install the driver, the name displayed on the device is: UG-05, and
the default is device audio transmission, the transmitter enters the standby
state
with the red LED lighting on indenitely.
②The Wireless device enters the pairing state after power on, long press the
button on the Wireless transmitter for 2 seconds to enter the pairing status, and
the green LED will ash quickly.
③The Wireless transmitter is successfully connected with the Wireless device,
and the green LED will stay on indenitely
Insert the Wireless transmitter into the USB port of the computer and it will
automatically turn on./Unplug the Wireless transmitter.
7
EN
Profiles Supported
Receiving distance
Sound Speaker Resistance
Sounding Horn Unit
A2DP/AVRCP/SMP/HFP
8-10M
32Ω±15%
40mm
16Ω±15%
30mm
20 HZ---20K HZ
108±3dB at 1K HZ
Vibration Speaker Resistance
Vibration Speaker Unit
Frequency Range
Sensitivity
-42 ± 3dB
DC5V
Microphone Sensitivity
Charging Voltage
800mACharging Current
3.7V
26-120mA
Operating Voltage
Operating Current
Headphone Parameters Information
Wireless Disconnection/Clear Connection
Short press the Wireless transmitter button, and the red LED will stay on
indenitely./In any state, long press the transmitter button for 8 seconds, the
green and red light will stay on indenitely.
8
EN
Packing List
1. Wireless Headphone
2. Boom Microphone
4. Audio Cable
5. User Manual
3. Micro USB charging cable
7. Mic Foam Cover
6. Wireless Transmitter
Warm Tips
Input
Signal-to-Noise Ratio
Frequency Range
Transmission Range
USB2.0
>90dB
20HZ---20KHZ
20M
5V
14mA---27mA
Operating Voltage
Operating Current
Wireless Transmitter Parameters Information
1. Please charge the headphone with 5V 1A / 5V 2A charger, high voltage may
damage the headphone.
2. When the headphone has not been used for more than 3 months, it needs to be
charged before use.
9
EN
Attentions
Warning
3. When the headphone has not been used for a long time, we suggest you
charge every 3 months to provide good protection for the battery.
4. We suggest you fully charge the headphone for the rst time use.
1. Please keep or use the headphone at normal temperature, avoid direct
sunlight.
2. Please keep the headphone away from re or other hot objects.
3. Please keep the headphone away from damp places or submerged in liquid,
keep dry
4. Please don't try to use other methods of charging other than the USB
charging cable we provide.
5. Please don't disassemble, repair, or modify.
6. Please pay attention to excessive clash, if any damage (like dents,
deformation, corrosion, etc.), please turn to us for assistance by the contact
information on the warranty card.
7. If the headphone produces an abnormal smell, higher than normal
temperature, color, or shape changes abnormally, please stop using and turn to
us for assistance by the contact information on the warranty card.
1. If the battery is replaced improperly, there is a danger of explosion. It can only
be replaced with a battery of the same type or equivalent. The battery (battery
pack or assembled battery) must not be exposed to the conditions such as
sunlight, re, or the similar overheating environment.
2. The device should not be exposed to water droplets or water splashes. It
should not be placed in objects such as vases or similar objects lled with
liquids.
3. This product is not a children's toy. Children under the age of 14 need to be
accompanied by parents to use.
10
EN
Tabla de contenidos
Idiomas:
Otros manuales de Auriculares de Maxell
